Question

In: Mechanical Engineering

What is the principle operation of the evaporator?

What is the principle operation of the evaporator?

Solutions

Expert Solution

Principle operation of evaporator is to absorb heat from refrigerated space or from the required space. The heat taken from this space is used to evaporate the working fluid which enters the evaporator as liquid. By using the heat taken from the space this liquid refrigerant or working fluid vaporizes and turns into gaseous form before it enters the compressor. So evaporator is directly associated with the refrigerated space or required space which is to be maintained at a particular temperature. By this process working fluid in the evaporator takes or absorbs heat from the space until equilibrium occurs. That is until both working fluid and the space have same temperature.


Related Solutions

(a) Describe the principle of operation of
(a) Describe the principle of operation of                (i) Klystron amplifier                (ii) Travelling wave tube (TWT) amplifier.(b) A parabolic reflector is used to receive a satellite signal of 4 GHz. If the beamwidth of the device is      2.50(i) find the diameter of the parabolic reflector.              (ii) calculate the gain of the device assuming that the efficiency factor is 50%
With the aid of a simple schematic describe the principle of operation of a linear time...
With the aid of a simple schematic describe the principle of operation of a linear time of flight mass analyzer (LTOF).
(a) Sketch and describe a hydraulic telemotor system (b) Explain it principle of operation
(a) Sketch and describe a hydraulic telemotor system (b) Explain it principle of operation
describe the constrution and principle of a fuel cell with a proper diagram showing operation with...
describe the constrution and principle of a fuel cell with a proper diagram showing operation with hydrogen and oxygen.
Explain the principle of operation of an ultrasonic sensor for use in an industrial automation application....
Explain the principle of operation of an ultrasonic sensor for use in an industrial automation application. Answer should include details on the type of target that can be detected, effect on sensing distance of different target types, typical sensing distance and what the term ‘blind zone’ refers to in relation to these sensors.
Explain the operation principle of a piezoelectric transducer and its main application in day to day...
Explain the operation principle of a piezoelectric transducer and its main application in day to day life.
I, Sketch and describe the structure and principle of operation of a well labeled linear Traveling...
I, Sketch and describe the structure and principle of operation of a well labeled linear Traveling Wave Tube TWT ii, What are the propagating modes, and Evanescent modes in Waveguide
-What is the principle of subsidiarity? -What is the principle of correspondence? -What is economies of...
-What is the principle of subsidiarity? -What is the principle of correspondence? -What is economies of scale?
An evaporator-crystallizer process is used to obtain solid potassium sulfate. The fresh feed to the evaporator...
An evaporator-crystallizer process is used to obtain solid potassium sulfate. The fresh feed to the evaporator contains 19.60% K2SO4 and is mixed with the recycled mother liquor stream before entering the evaporator. The crystal product of the crystallizer is still wet as it contains 10.00 kg solid K2SO4 per kg adhering mother liquor solution. The filtered mother liquor contains 40.00% K2SO4 and is recycled to join the fresh feed. Of all the water entering the evaporator, 45.00% is evaporated. The...
topic: Radio telescoped d. The technology and principle of working and its operation with suitable results?...
topic: Radio telescoped d. The technology and principle of working and its operation with suitable results? e. Sustainability aspects: highlight the parameters which makes the system sustainable and discussion of effective parameters studied ? f. Evaluation of the work with proper justification for chosen parameters and values ?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT