Heat is generated uniformly at a rate of 2x105 W/m3 in a wall of thermal conductivity...

Heat is generated uniformly at a rate of 2x10⁵ W/m³ in a wall of thermal
conductivity 25W/m K and thickness 60 mm. The wall is exposed to convection
on both sides, with a fluid temperature of 30C and h = 50W/m² K
on the left side, a fluid temperature of 15C and h = 12 W/m² K on the
right side.
(a) Determine surface temperature on each side of the wall, and
(b) the maximum temperature in the wall.

Expert Solution

samet mamat answered 2 years ago

A plane wall has thickness of 5 cm, thermal conductivity of 2 W/mK and generates heat....

A plane wall has thickness of 5 cm, thermal conductivity of 2 W/mK and generates heat. The left face of the wall (x=0) has a surface temp. of 80C and has air at 20C flowing past it with a heat transfer coefficient of 50 W/m^2K. If the right face is insulated then the temperature distribution through the wall has a general format T(x)=A+B*x+C*x^2 (a) Draw a properly labeled diagram (including a representative temperature distribution), state all assumptions and calculate the...

A composite cylindrical wall is composed of 2 materials of thermal conductivity ka = 240 W/mK...

A composite cylindrical wall is composed of 2 materials of thermal conductivity ka = 240 W/mK and kb = 20 W/mK, where interfacial contact resistance is negligible. - Liquid pumped through the tube is at a temperature Tinf, i = 200 F and provides a convection coefficient hi = 450 W/m^2K at the inner surface of the composite pipe -The outer surface is exposed to Tinf, o and provides a convection coefficient of ho = 20 W/m^2K -A thermocouple between...

Convert: a. Thermal conductivity value of 0.3 Btu/(h ft oF) to W/(m oC). b. Surface heat...

Convert: a. Thermal conductivity value of 0.3 Btu/(h ft oF) to W/(m oC). b. Surface heat transfer coefficient value of 105 Btu/(h ft^2 oF) to W/(m^2 oC)

What is thermal conductivity and what does thermal conducivitiy necessary for what and thermal conductivity is...

What is thermal conductivity and what does thermal conducivitiy necessary for what and thermal conductivity is important for clinic but why?

3. We wish to determine the thermal conductivity of an apple (= 950 kg/m3, Cp =...

3. We wish to determine the thermal conductivity of an apple (= 950 kg/m3, Cp = 3200 J/kg K), which can be considered to be a sphere of radius R = 4 cm. To do this, we design an experiment in which a thermocouple is placed at the center of the apple. A rubber sphere of known properties (= 980 kg/m3, Cp = 1910 J/kg K, k = 0.17 W/m K) and the same radius (4 cm) is also provided...

A spherical shell of wood with thermal conductivity of 0.13 W/m.K and an inner and outer...

A spherical shell of wood with thermal conductivity of 0.13 W/m.K and an inner and outer radius of 10 cm and 20 cm respectively contains a mixture of water and water vapor(100 C) inside the shell which is undergoing a phase change at atmospheric pressure. The shell is suspended in a large room with an ambient air temperature of 25 C Determine the temperature on the outer surface of the spherical shell and rate of heat loss from the fluid...

3. A stainless steel sphere of thermal conductivity 16 W/m · K with a diameter of...

3. A stainless steel sphere of thermal conductivity 16 W/m · K with a diameter of 4 cm is exposed to a convective environment of 15 W/m2 · K, 20?C. Heat is generated uniformly in the sphere at a rate of 1.0 MW/m3 . Determine the steady-state temperature of the sphere at its center and its surface. Also determine the heat flux at a radius of 1.5 cm.

In a slab of material 0.25 m thick and having a thermal conductivity of 45 W/mK,...

In a slab of material 0.25 m thick and having a thermal conductivity of 45 W/mK, the temperature °C at x under steady state is given by T = 100 + 200x – 400x2 when x is measured from one face in m. Determine the heat flow at x = 0, x = 0.125 and x = 0.25 m and also the temperatures and temperature gradients at these planes. If the difference in heat flow at these sections is due...

The thermal conductivity of a brass rod (property: thermal conductivity) when setting up an experiment to...

The thermal conductivity of a brass rod (property: thermal conductivity) when setting up an experiment to measure the thermal conductivity of a solid based on Fourier's Law, what hardware factors will need to be controlled? Give your reason for each one.

Consider a large plate of thickness 50 mm and thermal conductivity of k= 69 W/m.C in...

Consider a large plate of thickness 50 mm and thermal conductivity of k= 69 W/m.C in which heat is generated uniformly at a constant rate of 600 kW/m3. One side of the plate is insulated while the other side is subjected to convection to the environment at 30oC with a heat transfer coefficient of h= 94 W/m^2.C. considering six equal spaced nodes with a nodal spacing of 10 mm: (a) obtain the Finite Difference formulation of this problem, (b) determine...

Question