Question

In: Physics

V1 = 5000L P1 = 5bar t1 = 15C. How does the pressure, temperature and density...

V1 = 5000L P1 = 5bar t1 = 15C. How does the pressure, temperature and density change when the air is quickly compressed to half of its original volume? Compression is isenthropic

Solutions

Expert Solution


Related Solutions

0.5 kg of a gas at temperature t1=20?C and pressure p1=0.1 MPa was contained in a...
0.5 kg of a gas at temperature t1=20?C and pressure p1=0.1 MPa was contained in a cylinder with a piston. The gas was compressed (polytropic process) and a ratio of heat exchanged during the process to the work of compression was ¼. Find the final temperature and pressure of the gas if 15 KJ of heat was transferred to the surroundings. Specific heats at constant volume and pressure were 654.67 J/Kg/K and 897.64 J/kg/K, respectively.
Which of the noble gases has the highest density at standard temperature and pressure ?
Which of the noble gases has the highest density at standard temperature and pressure ?
0.5 Kg of air at t1 = 327 0C and the specific volume v1 = 0.2...
0.5 Kg of air at t1 = 327 0C and the specific volume v1 = 0.2 m3/Kg is enclosed in a cylinder under a piston. The gas slowly expands with no friction to the temperature t2 = 0 0C and the specific volume v2 =0.65 m3/Kg (polytrophic process). Find the work and heat of the process and change in internal energy of gas. Determine the initial and final pressure of the gas. The isentropic exponent and particular gas constant for...
If the volume of the original sample in Part A (P1 = 742 torr , V1...
If the volume of the original sample in Part A (P1 = 742 torr , V1 = 33.0 L ) changes to 75.0 L , without a change in the temperature or moles of gas molecules, what is the new pressure, P2?
A bus driver heads south with a steady speed of v1 = 20.0 m/s for t1...
A bus driver heads south with a steady speed of v1 = 20.0 m/s for t1 = 3.00 min, then makes a right turn and travels at v2 = 25.0 m/s for t2 = 2.60 min, and then drives northwest at v3 = 30.0 m/s for t3 = 1.00 min. For this 6.60-min trip, calculate the following. Assume +x is in the eastward direction. (a) total vector displacement (Enter the magnitude in m and the direction in degrees south of...
Suppose T1 and T2 are iid Exp(1). What is the probability density function of T1+T2? What...
Suppose T1 and T2 are iid Exp(1). What is the probability density function of T1+T2? What is the probability that T1+T2 ≥ 3?
A monatomic ideal gas (n moles) undergoes this cycle: (1) starting at V1, T1, it increases...
A monatomic ideal gas (n moles) undergoes this cycle: (1) starting at V1, T1, it increases the temperature at constant volume to 3T1; (2) from V1, 3T1, it increases the volume at constant temperature to 2V1; (3) from 2V1, 3T1, it decreases the temperature at constant volume back to the original temperature, T1; (4) from 2V1, T1, it decreases the volume back to the original volume, V1. (a) Sketch the cycle on a P-V diagram. (b) In terms of n...
Flow enters a heated duct at v1 = 2000 m/s, T1 = 300 K, and q...
Flow enters a heated duct at v1 = 2000 m/s, T1 = 300 K, and q = 5 x 105 J/kg. Find Mach1 and Mach2 for He, Ne, Ar, Kr, and Xe
In thermodynamics: Is Boyes Law P1V1 = P2V2 and Charles Law V1/T1 = V2/T2 Only true...
In thermodynamics: Is Boyes Law P1V1 = P2V2 and Charles Law V1/T1 = V2/T2 Only true if the system is adiabatic? Or no heat transfer or work transfer or change in potential or kinetic energy?
What role does temperature and confining pressure play in the type of deformation?
What role does temperature and confining pressure play in the type of deformation?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT