Given that a potential of 0.25 mV is applied to an aluminum conductor that is 100?m...

Given that a potential of 0.25 mV is applied to an aluminum conductor that is 100?m long and has a square cross–sectional area with width 1?m, answer the following questions. The resistivity of aluminum is 25 nW×m.

(a)Calculate the electric field.

(b)Calculate the magnitude of the current flowing in the conductor.

(c)Calculate the resistance of the conductor.

We are learning about the properties of materials right now. Thanks in advance.

Expert Solution

samet mamat answered 2 years ago

How many grams of aluminum sulfite will be formed from 125mL of a 0.25 M solution...

How many grams of aluminum sulfite will be formed from 125mL of a 0.25 M solution of sulfurous acid. Complete this question by ansering the following: a ) How many moles of sulfurous acid are present in 125 mL of a 0.25M solution? b) What is the molar ratio of sulfurous acid to aluminum sulfite? c) How many moles of aluminum sulfite will be produced? d) What is the molar mass of aluminum sulfite? e) How many frams of aluminum...

2) A 100-m curve is to connect a downgrade of 0.75% to an upgrade of 0.25%....

2) A 100-m curve is to connect a downgrade of 0.75% to an upgrade of 0.25%. If the level of the intersection point of the two grades is 150 m, calculate the necessary data for planning the curve ??

A 6.60-m length of 2.1-mm-diameter wire carries a 790 mA current when 24.0 mV is applied...

A 6.60-m length of 2.1-mm-diameter wire carries a 790 mA current when 24.0 mV is applied to its ends. a) Determine the resistance RR of the wire. b) Determine the resistivity ρρ. c) If the drift speed is 1.9×10−5m/s, determine the number n of free electrons per unit volume.

0.1 M HCl is a stong-conductor and 0.1 M HC2H3O2 is a weak-conductor. Explain the difference...

0.1 M HCl is a stong-conductor and 0.1 M HC2H3O2 is a weak-conductor. Explain the difference in conductivity between 0.1 M HCl and 0.1 M HC2H3O2. Relate the difference to the terms strong acid and weak acid.

In a hypothetical experiment, electrical current of 15 AMPs driven by an applied potential of 100...

In a hypothetical experiment, electrical current of 15 AMPs driven by an applied potential of 100 volts passes through a cylindrical rod (3 mm in diameter and 7 cm long). Recall, the power is calculated by power(Watts) = potential(VOLTS) x current(AMPS). The electrical power heats the cylindrical rod to a high temperature. The rod is inside of a ceramic tube (ID = 12 mm). The wall temperature of the ceramic tube is 600 C (maintained at this stead temperature by...

Consider 100 g of aluminum (p = 2700 kg/m^3) and 100 g of lead (p =...

Consider 100 g of aluminum (p = 2700 kg/m^3) and 100 g of lead (p = 11,300 kg/m^3). a. Which as a greater volume? Show why this is true mathematically. b. Which contains a larger number of moles? Show why this is true mathematically. c. Which contains more atoms? Show why this is true mathematically. A 685-liter oxygen tank contains oxygen gas at 20℃ . When the tank is full, the pressure gauge reads 3000 psi. a. How many oxygen...

A potential difference of 5.00 V will be applied to a 47.00 m length of 18-gauge...

A potential difference of 5.00 V will be applied to a 47.00 m length of 18-gauge tungsten wire (diameter = 0.0400 in). Calculate the current. Calculate the magnitude of the current density. Calculate the magnitude of the electric field within the wire. Calculate the rate at which thermal energy will appear in the wire. Tungsten: 5.28e-8

A potential difference of 3.60 V will be applied to a 33.00 m length of 18-gauge...

A potential difference of 3.60 V will be applied to a 33.00 m length of 18-gauge platinum wire (diameter = 0.0400inches). Calculate the current. Tries 0/20 Calculate the current density. Tries 0/20 Calculate the electric field. Tries 0/20 Calculate the rate at which thermal energy will appear in the wire.

If a cell with a resting membrane potential of -70 mV is treated so that the...

If a cell with a resting membrane potential of -70 mV is treated so that the resting membrane potential is at the equilibrium potential of K+, and then the permeability of the membrane for all ions is returned to normal: why WONT K+ move into the cell across the cell membrane until the resting membrane potential is restored but Na+ will?

The following chemical species are mixed: [ H+] = 0.25 M [NH3] = 0.25 M What...

The following chemical species are mixed: [ H+] = 0.25 M [NH3] = 0.25 M What kind is formed in the balance? And what is the pH of the solution?

Question