Question

In: Other

2500 mol/min of a liquid stream containing 1% component B is to be treated by stripping...

2500 mol/min of a liquid stream containing 1% component B is to be treated by stripping with air. The incoming air contains 0.01% B, and the liquid leaving the stripper is to contain 0.01% B. The Henry’s law constant is 1.5.

a. What is the minimum required gas rate?

b. If the gas rate is 1.15 times the minimum gas rate, how many theoretical stages are required?

Solutions

Expert Solution


Related Solutions

A liquid stream ,F, containing A and B is fed to a distillation column. Given: Mole...
A liquid stream ,F, containing A and B is fed to a distillation column. Given: Mole fraction of A in the feed is 0.65 A is the more volatile component The enthalpy of the feed as a saturated vapor = 1125 btu/lbmol The enthalpy of the feed as a saturated liquid = 140 btu/lbmol The enthalpy of the feed as fed to the column = 440 btu/lbmol 1) What is q? (Correct answer is 0.69543) If the feed line equation...
Problem 1: a. An incoming stream of 1500 lbmol/min consists of saturated water with 62% liquid...
Problem 1: a. An incoming stream of 1500 lbmol/min consists of saturated water with 62% liquid water and 28% steam at 40 bar. This stream is heated at constant pressure to 700ºC. Using the steam tables, what is the heat transfer requirement for this step in kW? b. This steam is then compressed isothermally to steam at 150 bar in a second step. What is the heat transfer requirement for this step in kW?
15 mol /h of stream 1 (gas, at 1.1 atm and 0°C) containing 25% (mol basis)...
15 mol /h of stream 1 (gas, at 1.1 atm and 0°C) containing 25% (mol basis) propane and rest butane is mixed with a second stream (gas, at 1.1 atm and 70°C) containing 40% (mol basis) propane and rest butane. The output stream is 40 mol/h (gas, at 1.1 atm). The relative enthalpies as a function of temperature (T is in °C) are H (J/mol) for propane= 91*T H (J/mol) for butane= 121*T a) What is the composition of the...
26 mol/hr of stream 1 (gas, at 1.1 atm and 0°C) containing 30% (mol basis) propane...
26 mol/hr of stream 1 (gas, at 1.1 atm and 0°C) containing 30% (mol basis) propane and rest butane is mixed with a second stream (gas, at 1.1 atm and 45°C) containing 60% (mol basis) propane and rest butane. The output stream is 70 mol/hr (gas, at 1.1 atm). The relative enthalpies as a function of temperature (T is in °C) are given as: H (J/mol) for propane = 91*T and H (J/mol) for butane= 121*T a) What is the...
If a small stream of liquid A was strongly deflected by a charged object, liquid B...
If a small stream of liquid A was strongly deflected by a charged object, liquid B was moderately deflected, and liquid C was weakly deflected rank the liquids in order of increasing polarity
A liquid containing 60 mol% toluene (Tb = 110 °C) and 40 mol% benzene (Tb =...
A liquid containing 60 mol% toluene (Tb = 110 °C) and 40 mol% benzene (Tb = 80 °C) is continuously distilled in a single-equilibrium-stage unit at atmospheric pressure. What percentage of benzene in the feed leaves in the vapour if 90% of the toluene entering in the feed leaves in the liquid. Assume a relative volatility of 2.3 and obtain the solution graphically. The solution may require an iterate approach.
500 kgmol/h of a gas stream containing 2% of component A is to be purified using...
500 kgmol/h of a gas stream containing 2% of component A is to be purified using gas absorption. The vent from the absorber can contain no more than 0.5 kgmol/h of A. Two scrubbing liquids, P and Q, are available. a. For liquid Q, m=0.45. How many stages are required in the scrubber for 1.5 times the minimum liquid rate? The incoming Q contains no A. 2 b. For liquid P, m=0.25. If liquid P is used in the scrubber...
1 kmol/h of a feed stream containing 15, 45 and 40 mol% of nitrogen, n-butane and...
1 kmol/h of a feed stream containing 15, 45 and 40 mol% of nitrogen, n-butane and n-pentane at 500 ºC and an unknown pressure, is cooled isobarically to a temperature of 105 ºC and fed into a flash drum operating at the same temperature (105 ºC) and pressure. If the vapor fraction V/F in the drum is equal to 0.5, determine the pressure at which the flash drum operates, and the flow rates and composition of both streams leaving the...
In an ideal solution of A and B, 2.75 mol are in the liquid phase and...
In an ideal solution of A and B, 2.75 mol are in the liquid phase and 4.255 mol are in the gaseous phase. The overall composition of the system is ZA = 0.420, and xA = 0.310. Calculate yA.
A saturated liquid feed composed of 30 % mol Benzene (B), 30 % mol Toluene (T)...
A saturated liquid feed composed of 30 % mol Benzene (B), 30 % mol Toluene (T) and 40 % mol p-Xylene (X) is separated by an isobaric column operating at 1 atm. The feed flow rate is 1 kmol/hr. Toluene is the light key with a mole fraction in the bottom stream equal to 0.1. The heavy key has a mole fraction in the distillate stream equal to 0.05. 1- Find the optimal design using shortcut methods tool of Aspen-HYSYS...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT