Question

In: Mechanical Engineering

Consider the following plane stress state: σx = 30 kpsi, σy = -10 kpsi, τxy =...

Consider the following plane stress state: σx = 30 kpsi, σy = -10 kpsi, τxy = 10 kpsi ccw

Calculate the following:

1. The coordinates of the center of the Mohr's circle C The location of the center of the Mohr's circle C is (____kpsi, ______kpsi).

2. Principal normal stresses (σ1, σ2) The principal normal stresses are σ1 = _____kpsi and σ2 = ______kpsi. ​

3. Maximum shear stress (τ) The maximum shear stress is ______kpsi.

4. The angle from the x axis to σ1 (Φp) The angle from the x axis to σ1 (Φp) is _____° ccw.

5. The angle from the x axis to τ (Φs) The angle from the x axis to τ (Φs) is _______° cw.

6. The radius of the Mohr's circle The radius of the Mohr's circle is ______kpsi.

Solutions

Expert Solution


Related Solutions

From the given shearing stress and normal stress as below: σx = -5MPa σy = 10MPa...
From the given shearing stress and normal stress as below: σx = -5MPa σy = 10MPa τxy = -5MPa Sketch the free body diagram of the stress element. Determine and sketch the free body diagram for the principal stress using transformation equations. Determine and sketch the free body diagram for the maximum shearing stress, correspond with the normal stress using the general transformation equations.
Use a calculator to verify that Σx = 128, Σx2 = 6272, Σy = 150, Σy2...
Use a calculator to verify that Σx = 128, Σx2 = 6272, Σy = 150, Σy2 = 4778, and Σxy = 2966. Compute r. (Round your answer to three decimal places.) Sample size n = 5
Suppose X, Y, and Z are independent Gaussian random variables with σx = 0.2, σy =...
Suppose X, Y, and Z are independent Gaussian random variables with σx = 0.2, σy = 0.3, σz = 1, μx=3.0, μy=7.7, and μz = 0 Determine the following: (a) The joint PDF of X, Y, and Z (b) Pr( (7.6<Y<7.8) | (X<3, Z<0) c) The Correlation matrix and covariance matrix of X, Y, and Z
Do the following stress tensors represent the same stress state or not?
Do the following stress tensors represent the same stress state or not? Prove your judgement. 
Derive the transformation equations for normal stress and shear stress acting on the inclined plane (for...
Derive the transformation equations for normal stress and shear stress acting on the inclined plane (for 2D case)
A cylinder(σY= 230 MPa)which is initially free from residual stress has internal radius b = 20...
A cylinder(σY= 230 MPa)which is initially free from residual stress has internal radius b = 20 mm and external radiusa= 50 mm. Determine: a)The maximum internal pressure without yielding the cylinder. Give your answer in MPa.[5 marks] b)The fully plastic internal pressure. Give your answer in MPa.[5 marks]c)The radius to which the material yields, when the pressure is 150 MPa. Give your answer in mm.[10 marks] c)The cylinder is loaded by internal pressure, pi, which, when released, causes residual stress...
5. [§ 3.1,3.3] — Consider the plane, P , described by the equation(s) ? (a) (10...
5. [§ 3.1,3.3] — Consider the plane, P , described by the equation(s) ? (a) (10 pts) Write the system of equations in matrix-vector form (A⃗x = ⃗b). (b) (10 pts) Find all solutions to the system of equations. x1+x3+x4 = 0 x1+x2+3x3+5x4 = 0 (c) (10 pts) Identify a basis for P . (d) Next, consider the orthogonal projection onto P, defined by T(⃗x) = M⃗x, M ∈ R4×4. { We do not have the tools to derive the...
When considering plane stress or plane strain problems using the CST element determine whether changing the...
When considering plane stress or plane strain problems using the CST element determine whether changing the thickness of the object will change the resulting displacements and stresses for force vectors which are made up of only the loading conditions listed in each part a-f: Point loads Body forces Surface tractions Point loads and body forces Surface tractions and body forces Point loads, body forces, and surface tractions. Explain your reasoning
1. Explain the difference between Plane Stress problem and Plane Strain Problem. Give an example. 2....
1. Explain the difference between Plane Stress problem and Plane Strain Problem. Give an example. 2. What is the displacement boundary condition you would like to apply after cutting through the symmetric line? 3. What are the FEA results we would be interested in 2-D stress-strain analysis?
state of economy probability state of econ return stock a return stock b depression .10 -30%...
state of economy probability state of econ return stock a return stock b depression .10 -30% 0% recession .20 -10% 5% normal .5 20% 20% boom .2 50% -5% a. calculate the expected returns of stock a and stock b b. what are the stand-alone risk of stock a and stock b   c. calculate the coefficient of variation of stock a CVa and stock b CVb d. Suppose the market is in equilibrium (That is, required returns equal expected returns)....
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT