Question

In: Civil Engineering

After detail underground inspection, the geotechnical engineer have located underground utilities consist of lines for telecommunication,...

After detail underground inspection, the geotechnical engineer have located underground utilities consist of lines for telecommunication, electricity distribution and rail tunnels located at a depth starting at 2 meter below the ground surface. With the help of a diagram, provide and describe a geotechnical design flowchart of your proposed platform with regards to the findings by the geotechnical engineer mentioned.

Solutions

Expert Solution

During a geotechnical evaluation

Geotechnical evaluations usually consist of multiple components. First, a geotechnical engineer or engineering geologist performs a surface evaluation, which may include a site walk, reviewing maps and aerial photographs, or geophysical surveys. The second phase involves soil sampling, typically by using a drill rig to conduct test borings that provide valuable data related to soil properties and stratigraphy.

During test borings, samples are often collected for further laboratory testing; the geotechnical engineer uses the results of such tests to evaluate for site suitability and final design recommendations.


Related Solutions

As an Geotechnical Engineer for a company you have been instructed to handle a project to...
As an Geotechnical Engineer for a company you have been instructed to handle a project to develop a new Mall. The project currently in construction stage. During process of pile installation, the contractor notices few problems with the site condition: Limited area for work space which might have problem to use conversional method for pile installation. Project site is near with Hospital (contractor must control the sound pollution). As a consultant you are need to solve these problems and need...
As a geotechnical engineer, you have been asked to conduct experiments that are required to be...
As a geotechnical engineer, you have been asked to conduct experiments that are required to be used in strength and static calculations. If the ground class is not determined and the budget is considered to be unlimited, explain what experiments you choose and why.
fORD sells cars and have the following product lines – Sedans, Sports Utilities Vehicles (SUV) and...
fORD sells cars and have the following product lines – Sedans, Sports Utilities Vehicles (SUV) and Family Vans. For its January 2020 operations, the following were made available for management analysis. Sedan SUVs Family Vans Selling Price ¥1,000,000 ¥2,000,000 ¥2,200,000 Variable Manufacturing Costs per unit 400,000 900,000 1,100,000 Sales Volume (units) 150 200 50 Fixed manufacturing overhead costs total ¥275,000,000 and fixed administrative expenses total ¥25,000,000. FORD gives a 5% commission on sales (variable selling expense to its car sales...
You have joined a team in an ICT department located in a large bank. After the...
You have joined a team in an ICT department located in a large bank. After the recent Royal Commission into banking, your employer wants to upgrade many aspects of governance. Your team has been asked about APM. In particular, the bank wants to know how APM might influence benefits management. What should the team say? The Bank wants to know about what research tells us about the realities of implementing and using APM. What are the success rates? What impediments...
Wenton Powersports produces dune buggies. They have three assembly lines, “Razor,” “Blazer,” and “Tracer,” named after...
Wenton Powersports produces dune buggies. They have three assembly lines, “Razor,” “Blazer,” and “Tracer,” named after the particular dune buggy models produced on those lines. Each assembly line was originally designed using the same target production rate. However, over the years, various changes have been made to the lines. Accordingly, management wishes to determine whether the assembly lines are still operating at the same average hourly production rate. Production data (in dune buggies/hour) for the last eight hours are as...
Wenton Powersports produces dune buggies. They have three assembly lines, “Razor,” “Blazer,” and “Tracer,” named after...
Wenton Powersports produces dune buggies. They have three assembly lines, “Razor,” “Blazer,” and “Tracer,” named after the particular dune buggy models produced on those lines. Each assembly line was originally designed using the same target production rate. However, over the years, various changes have been made to the lines. Accordingly, management wishes to determine whether the assembly lines are still operating at the same average hourly production rate. Production data (in dune buggies/hour) for the last eight hours are as...
Wenton Powersports produces dune buggies. They have three assembly lines, “Razor,” “Blazer,” and “Tracer,” named after...
Wenton Powersports produces dune buggies. They have three assembly lines, “Razor,” “Blazer,” and “Tracer,” named after the particular dune buggy models produced on those lines. Each assembly line was originally designed using the same target production rate. However, over the years, various changes have been made to the lines. Accordingly, management wishes to determine whether the assembly lines are still operating at the same average hourly production rate. Production data (in dune buggies/hour) for the last eight hours are as...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT