A 0.6025 g sample was dissolved, and the Ca2+ and Ba2+ ions present were precipitated as...

A 0.6025 g sample was dissolved, and the Ca2+ and Ba2+ ions present were precipitated as BaC2O4·H2O and CaC2O4·H2O. The oxalates were then heated in a thermogravimetric apparatus leaving a residue that weighed 0.5713 g in the 320o-400oC range and 0.4673 g in the 580o-620oC range. Calculate the percentages of Ca and Ba in the original sample.

Expert Solution

queen_honey_blossom answered 2 years ago

A sample of 0.7960 g of an unknown compound containing barium ions (Ba2+) is dissolved in...

A sample of 0.7960 g of an unknown compound containing barium ions (Ba2+) is dissolved in water and treated with an excess of Na2SO4. If the mass of the BaSO4 precipitate formed is 0.7651 g, what is the percent by mass of Ba in the original unknown compound? ———————— How many grams of NaCl are required to precipitate most of the Ag+ ions from 2.50 × 102 mL of 0.0467 M AgNO3 solution ——— How many grams of KHP are...

4. A 0.3634 g sample of ore containing calcium is dissolved and the calcium ions are...

4. A 0.3634 g sample of ore containing calcium is dissolved and the calcium ions are precipitated as CaC2O4. The CaC2O4 precipitate is filtered, washed and redissolved in acid. The pH of the resulting Ca2+ solution is adjusted. A 25.00 mL volume of 0.0376 M EDTA is added. The excess EDTA is back-titrated to the end point, requiring 23.08 mL of 0.0188 M Mg2+ solution. a) Write a balanced chemical equation for the EDTA reactions that occur as part of...

Hard water often contains dissolved Ca2+ and Mg2+ ions. One way to soften water is to...

Hard water often contains dissolved Ca2+ and Mg2+ ions. One way to soften water is to add phosphates. The phosphate ion forms insoluble precipitates with calcium and magnesium ions, removing them from solution. Suppose that a solution is 0.049 M in calcium chloride and 0.094 M in magnesium nitrate. What mass of sodium phosphate would have to be added to 1.4 L of this solution to completely eliminate the hard water ions? Assume complete reaction. Enter a numerical answer in...

Use solubility rules and other properties to separate the given ions (Ba2+, Ag+, and Fe3+) Ba2+,...

Use solubility rules and other properties to separate the given ions (Ba2+, Ag+, and Fe3+) Ba2+, Ag+, and Fe3+ mixed in one beaker. Real compounds dissolved: Ba(NO3)2, AgNO3 and Fe(NO3)3; 0.1 mol/L for all. You may need to precipitate them one by one. HNO3, NaI, Na2SO4, NaOH, NaHCO3, Na2CO3, Na3PO4, filter paper, funnel, and Erlenmeyer flasks are available to accomplish the task. Three solid samples total should be obtained. What is a procedure for separating the given ions?

Suppose the mole number of Ca2+ ions in a 50 mL water sample is quantified as...

Suppose the mole number of Ca2+ ions in a 50 mL water sample is quantified as 1.5 × 10−5 mol. What is the concentration of Ca2+ ions in the water sample in ppm CaCO3?

The aluminum in a 1.258-g sample of impure ammonium aluminum sulfate was precipitated with aqueous ammonia...

The aluminum in a 1.258-g sample of impure ammonium aluminum sulfate was precipitated with aqueous ammonia as the hydrous Al2O3 . XH2O The precipitate was filtered and ignited at 1000°C to give anhydrous Al2O3, which weighed 0.1060 g. Express the result of this analysis in terms of: % NH4 Al(SO4)2 = % % Al2O3= % % Al = %

A 4.75 g sample of solid NaOH is dissolved in 50.5 g of H2O in a...

A 4.75 g sample of solid NaOH is dissolved in 50.5 g of H2O in a constant-pressure calorimeter having a heat capacity of 18.5 J/°C. The temperature rises from 21.1°C to 33.6°C. Assuming that the solution has a specific heat capacity of 4.184 J/g·°C and negligible heat loss from the calorimeter, how much heat is produced in the solution process? Thanks so much!!

A 0.4939 g sample containing calcium carbonate was homogeneously precipitated as CaC2O4×H2O (MW = 146.12). The...

A 0.4939 g sample containing calcium carbonate was homogeneously precipitated as CaC2O4×H2O (MW = 146.12). The precipitate was filtered and dried. The glass filtering crucible containing the precipitate weighed 30.8352 g and the empty crucible weighed 30.4190 g. Calculate the percent by weight of calcium carbonate and of calcium in the sample.

Which would be the best emulsifier of soil if soft water (no Ca2+ ions, Mg2+ ions,...

Which would be the best emulsifier of soil if soft water (no Ca2+ ions, Mg2+ ions, and so on) were used? a. A soap. b. A detergent. c. Both would be about the same. Explain your answer: ________________________________

- A 35.0 g sample of ethylene glycol, HOCH2CH2OH is dissolved in 500 g of water....

- A 35.0 g sample of ethylene glycol, HOCH2CH2OH is dissolved in 500 g of water. The vapor pressure of water at 32 C is 35.7 mmHg, What is the vapor pressure of the water/ethylene glycol solution at 32 C? - What is the Boiling Point of the solution resulted from the dissolving of 32.5 g of sugar (C6H12O6) in 250.0 g of water? - . A 1.07 mg sample of a compound was dissolved in 78.1 mg of camphor....

Question