A 0.70-m aluminum bar is held with its length parallel to the east-west direction and dropped...

A 0.70-m aluminum bar is held with its length parallel to the east-west direction and dropped from a bridge. Just before the bar hits the river below, its speed is 29 m/s, and the emf induced across its length is 7.0 x 10^-4 V. Assuming the horizontal component of the Earth's magnetic field at the location of the bar points directly north, (a) determine the magnitude of the horizontal component of the Earth's magnetic field, and (b) state whether the east end or the west end of the bar is positive.

Expert Solution

genius_generous answered 1 year ago

A 0.63-m aluminum bar is held with its length parallel to the east-west direction and dropped...

A 0.63-m aluminum bar is held with its length parallel to the east-west direction and dropped from a bridge. Just before the bar hits the river below, its speed is 27 m/s, and the emf induced across its length is 5.5 x 10-4 V. Assuming the horizontal component of the Earth's magnetic field at the location of the bar points directly north, (a)determine the magnitude of the horizontal component of the Earth's magnetic field, and (b) state whether the east...

A 0.74-m aluminum bar is held with its length parallel to the east-west direction and dropped...

A 0.74-m aluminum bar is held with its length parallel to the east-west direction and dropped from a bridge. Just before the bar hits the river below, its speed is 25 m/s, and the emf induced across its length is 7.9 x 10-4 V. Assuming the horizontal component of the Earth's magnetic field at the location of the bar points directly north, (a) determine the magnitude of the horizontal component of the Earth's magnetic field, and (b) state whether the...

A 2.00-m length of wire is held in an east–west direction and moves horizontally to the...

A 2.00-m length of wire is held in an east–west direction and moves horizontally to the north with a speed of 0.500 m/s. The Earth’s magnetic field in this region is of magnitude 50.0 mT and is directed northward and 53.08 below the horizontal. (a) Calculate the magnitude of the induced emf between the ends of the wire and (b) determine which end is positive.

Suppose a 1-m length of aluminum wire 0.001 m in diameter is held in a horizontal...

Suppose a 1-m length of aluminum wire 0.001 m in diameter is held in a horizontal east-west position (in vertical equilibrium) by an external magnetic eld directed north of strength 1 G = 10-4 T. The density aluminum = 2:70 103 kg/m3 and the resistivity aluminum = 2:65 10?8 m. Also note the volume of a cylinder is Vcyl = r2h. (a) Find the resistance RAl of the aluminum wire. (b) Find the volume VAl of the aluminum wire. (c)...

Two parallel paths 20 m apart run east–west through the woods. Brooke walks east on one...

Two parallel paths 20 m apart run east–west through the woods. Brooke walks east on one path at 7 km / h, while Jamail walks west on the other path at 5 km / h. If they pass each other at time t = 0 , how far apart are they 11 s later, and how fast is the distance between them changing at that moment?

A pure aluminum bar has a diameter of 15 cm and a length of 1.25 m....

A pure aluminum bar has a diameter of 15 cm and a length of 1.25 m. The rod is initially uniform in temperature at 300?C. The bar is now suddenly exposed to a convection environment at 50?C with h = 1250 W/m K. How long does it take the center to cool to a temperature of 80?C? (a) Determine if a lumped capacitance analysis is or is not appropriate. (b) Determine the cooling time assuming the lumped capacitance model is...

When an iron bar of mass m is dropped through a height difference Δh, its potential...

When an iron bar of mass m is dropped through a height difference Δh, its potential energy changes by the amount mgΔh, where g is the acceleration of gravity, equal to 9.81 m s-2. Suppose that when the bar hits the ground, all that energy is converted to heat, increasing the temperature of the bar. If the specific heat capacity of the material in the bar is 0.444 J K-1 g-1, calculate the height from which the bar must be...

A runner jogs for 150 m due west (displacement A) and then turns to a direction...

A runner jogs for 150 m due west (displacement A) and then turns to a direction 30.0 degrees east of south and jogs for another 100 m (displacement B). Showing all work and units, and putting boxes around your answers, calculate (a) the total distance between her initial and final positions. (Answer: 132 m) (b) the direction of her net displacement C as an angle θC south of west. (Answer: 41°) I am not really sure how to start this....

A box has dimensions of 1.8 m length (y-direction), 1.8 m width (x- direction), and 3.6...

A box has dimensions of 1.8 m length (y-direction), 1.8 m width (x- direction), and 3.6 m height (z-direction). With the head of a vector at the front, bottom, left-hand corner of the box , and the tail of the vector at the back, top, right-hand corner of the box (at the origin); give the vector in Cartesian form, magnitude/direction angles representation, and the unit vector.

A 2024-T3 aluminum bar has rectangular cross section dimensions of 2" x 0.5". The length of...

A 2024-T3 aluminum bar has rectangular cross section dimensions of 2" x 0.5". The length of the column is 9.0 inches. A) Calculate the transition slenderness ratio (Sr)D for this column. [Answer should be 69.9] B) Calculate the slenderness ratio for your assigned column length. [Answer should be 62] C) Calculate the maximum unit load (Pcr/A) for the bar. Indicate whether the column is a Johnson or Euler column. [Numerical answer should be 25296 psi but I don't know Johnson...

Question