Question

In: Physics

You are on roller blades, holding a rope attached to a truck. Starting from rest, the...

You are on roller blades, holding a rope attached to a truck. Starting from rest, the truck pulls you. After traveling for 7.33 s, you are moving at 10.0 m/s. If the friction in your roller blades is negligible, what is the tension in the rope? Your mass is 69.0 kg. Report your answer in SI units, rounded to the nearest whole number.

Solutions

Expert Solution


Related Solutions

A roller-coaster car is starting from rest from the top of the slope of height H....
A roller-coaster car is starting from rest from the top of the slope of height H. As it reaches the bottom of the slope, it is moving at 30 m/s along a straight horizontal track. Using the principle of conservation of energy, a. Calculate the height H. b. Calculate the speed of the roller-coaster car after climbing the 10 m hill shown in the figure. Ignore friction. c. What is the change in kinetic energy as the car goes a....
Starting from rest, a truck travels in a straight line for 7.0 s with a uniform...
Starting from rest, a truck travels in a straight line for 7.0 s with a uniform acceleration of +1.6 m/s2. The driver then applies the brakes for 3.0 s, causing a uniform acceleration of −2.0 m/s2 over that time. (a) What is the truck's speed at the end of the braking period? (b) What is the total distance traveled by the truck (from the point where it started at rest to the end of the braking period)
A 62.0-kg boy and his 36.0-kg sister, both wearing roller blades, face each other at rest....
A 62.0-kg boy and his 36.0-kg sister, both wearing roller blades, face each other at rest. The girl pushes the boy hard, sending him backward with a velocity 3.10 m/s toward the west. Ignore friction. (a) Describe the subsequent motion of the girl. She will move west, in the same direction as her brother, with a speed 3.10 m/s.She will move east, directly away from her brother with a speed 6.89 m/s.    She will move east, directly away from her brother...
Assessment of Purchasing Power Parity Blades, the U.S.–based roller blades manufacturer, is currently both exporting to and importing from Thailand.
 Assessment of Purchasing Power Parity Blades, the U.S.–based roller blades manufacturer, is currently both exporting to and importing from Thailand. The company has chosen Thailand as an export target for its primary product, Speedos, because of Thailand’s growth prospects and the lack of competition from both Thai and U.S. roller blade manufacturers in Thailand. Under an existing arrangement, Blades sells 180,000 pairs of Speedos annually to Entertainment Products, Inc., a Thai retailer. The arrangement involves a fixed, baht-denominated price and...
You are pulling a rope that is attached to a sled that your cousin is riding...
You are pulling a rope that is attached to a sled that your cousin is riding on. The rope that you are pulling on is at an angle of 30 degrees above the surface of the snow. Your cousin is holding a second rope that is attached to a second sled that is carrying firewood. The rope that your cousin is pulling is parallel to the surface of the snow. The mass of your cousin and her sled is 45...
A cart starts from rest at the top of a roller coaster that is 40 meters...
A cart starts from rest at the top of a roller coaster that is 40 meters high. It descends down the first hill all the way to ground level before heading into a vertical circular loop with diameter 20 meters. What is the minimal H(height of the initial hill) needed in order for the cart to just barely make it over the top of the loop?
A roller coaster starts from rest at A, rolls down the track to B, describes a...
A roller coaster starts from rest at A, rolls down the track to B, describes a circular loop of 12-m diameter, and travels up and down past point E. Assume that there is no energy loss due to friction. Given: h = 20 m. Shoe the free body diagrams at points B,D, and E. Determine the force exerted by his seat by a 80 kg rider at B and D and the minimum value of the radius of curvature at...
A roller coaster car with a mass 700 Kilograms starts from rest at h1 above the...
A roller coaster car with a mass 700 Kilograms starts from rest at h1 above the ground and slides along a track. The car encounters a loop of radius 12 m. The bottom of the loop is a height h2 = 5 m from the ground. What would be the max height of release h1 for the roller coaster car if the amount of thermal energy produced between the point of release and the top of the loop should not...
You use a rope of length ℓ to tie the front of a 1500-kg truck to...
You use a rope of length ℓ to tie the front of a 1500-kg truck to the rear of a 1000-kg car and then use an identical rope of length ℓ to tie the front of the car to the rear of a 500 kg trailer. Each rope will break if its tension exceeds 1200 N . You attach a strong cable to the rear of the truck and use a winch to pull it with a force of magnitude...
A ball of clay with a mass of 4.0 kg, starting from rest, falls from a...
A ball of clay with a mass of 4.0 kg, starting from rest, falls from a height of 0.20 m above a block with mass 1.0 kg that rests on top of a spring with spring constant 90 N/m. The block then sticks to the block and the system undergoes simple harmonic motion. Please submit your answers to the following questions on a separate sheet of paper (or multiple sheets of paper). i. Write the formulas for the position, velocity,...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT