Question

In: Civil Engineering

types of plastic pipe that can be used for hot and cold water distribution: 1. 2....

types of plastic pipe that can be used for hot and cold water distribution:
1.
2.
3.
List 3 types of plastic pipe used for sanitary drainage and vent piping:
1.
2.
Black iron steel pipe is used for carrying ____________________ or ____________________.


The cast iron pipes no-hub pipes are used for below ground or above ground?_________________


Type _____ copper pipe is the most commonly used in residential water lines.


What color is the copper pipe, most commonly used in residential water lines?______________

Using the copper pipe from question 5 and 6, a 6” pipe come in what length?_______________

PVC fittings are joined to PVC pipe using ___________________ .

___________________fittings join 2 length of the same pipe size when making a straight run.

__________________ fittings are 4-way fittings that are essentially the combination of two tees.

Sanitary ____________________ are used with vertical drain connections.

PVC pipe is normally supplied in ________-foot and ______lengths, but other lengths are available.

What is the equivalent length of pipe for a 15’ long, 10” dia PVC pipe connected to a 90⁰ Elbow?

Solutions

Expert Solution

all answers are highlighted in bold

types of plastic pipe that can be used for hot and cold water distribution:

1.Polyvinyl Chloride (PVC) Pipe

2.Chlorinated Polyvinyl Chloride (CPVC) Pipe

3.Cross Linked Polyethylene (PEX) Pipe

List 3 types of plastic pipe used for sanitary drainage and vent piping:

1.High Density Polyethylene (HDPE) Pipe

2.Acrylonitrile Butadiene styrene (ABS) Pipe

3. Grey Polybutylene (PB) Pipe

Black iron steel pipe is used for carrying GAS or WATER.

The cast iron pipes no-hub pipes are used for below ground or above ground? Mostly Below Ground

Type L and M copper pipe is the most commonly used in residential water lines.

What color is the copper pipe, most commonly used in residential water lines?

​​​​​Type M - Red

Type L - Blue

PVC fittings are joined to PVC pipe using Glue .

Union&Nipple fittings join 2 length of the same pipe size when making a straight run.

Double Tee Socket fittings are 4-way fittings that are essentially the combination of two tees.

Sanitary vents are used with vertical drain connections.

PVC pipe is normally supplied in 20-foot and 10-foot lengths, but other lengths are available.ot lengths, but other lengths are available.

What is the equivalent length of pipe for a 15’ long, 10” dia PVC pipe connected to a 90⁰ Elbow?

Perimeter of a 10'' dia 90o elbow = 3.14*10/4 = 7.85''

Effective Size = 15' + 7.85'' = 15.6541'


Related Solutions

How can phthalic acid not be soluble in water in both hot or cold temperatures?
How can phthalic acid not be soluble in water in both hot or cold temperatures?
Cold water inside / outside diameter in the same axis two pipe heat exchanger used as...
Cold water inside / outside diameter in the same axis two pipe heat exchanger used as engine oil cooler It enters the 25/30 mm steel pipe at a temperature of 15 degrees at a speed of 0.5 m / s, Take off at a temperature of 25 degrees.Hot oil, on the inside / outside diameter of 40/46 mm steel pipe, at a temperature of 60 degrees with a speed of 0.25 m / s. enters.it is desired to cool the...
50 ml of hot water was mixed with 50ml of cold water in a calorimeter. The...
50 ml of hot water was mixed with 50ml of cold water in a calorimeter. The initial temperature of the cold water is 22°C, the initial temperautre of hot water is 79°C, the average temperature is 50.5°C, the temperature at time 0 is 46.333°C. What is the heat lost by hot water, the heat gained by cold water, the heat gained by calorimeter in J, temperature change of the calorimeter, the heat capacity (C) of the calorimeter in J/°C, and...
Why is benzocaine acid soluble in hot water but not in cold water? How does this...
Why is benzocaine acid soluble in hot water but not in cold water? How does this relate to the molecular interactions involved?
Hot & Cold compress 1. What are compresses? 2. What conditions would benefit from hot compresses?...
Hot & Cold compress 1. What are compresses? 2. What conditions would benefit from hot compresses? 3. What conditions would benefit from cold compresses? 4. How do you create a compress?
An insulated steel pipe carries hot water at 80 ºC. The outer surface of the insulation...
An insulated steel pipe carries hot water at 80 ºC. The outer surface of the insulation loses heat to the environment by convection and radiation. For convection, assume hconv = 5.8 W/m2.ºC. The emissivity of the insulation is 0.88 and conductivity, k = 0.038 W/mK. The surroundings are at 30 ºC. Assume the inner surface of the insulation is at the water temperature. What is the surface temperature of the insulation?
Maximum theoretical percent from crystallization when given solubilities in hot and cold water
The solubility of acetanilide in hot water (5.5g/100ml at 100℃) is not very great, and its solubility in cold water (.53g/100ml at 0℃) is still significant. What is the maximum theoretical percent recovery from the crystallization of 5g of acetanilide from 100ml of water (assuming the solution is chilled to 0℃ for filtration).
Class: Hydraulic Engineering Hot and cold water Plumbing systems. The design criteria and methods?
Class: Hydraulic Engineering Hot and cold water Plumbing systems. The design criteria and methods?
The thermal conductivity of an insulating material used over a hot pipe varies as k =...
The thermal conductivity of an insulating material used over a hot pipe varies as k = 0.0545 (1 + 28.4 × 10–4 T) where T is in °C and k is in W/mK. This insulation is used for a thickness of 12 cm over a pipe of diameter 0.6 m. The pipe surface is at 300°C and the outside insulation temperature is 60°C. Determine the heat flow for a length of 5 m. Also find the mid layer temperature.
Topic: Thermochemistry Description: Many people have said that cold water boils faster than hot water. This...
Topic: Thermochemistry Description: Many people have said that cold water boils faster than hot water. This is not true. In fact, it’s been said so many times that most people believe it to be a fact. Write a response to the following prompt. 200-250 words. Prompt: Postulate a reason for why this may have been thought to be true. Is there any scientific evidence backing this claim at all? Please explain your reasoning.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT