You are provided a fully saturated clay soil sample with a plasticity index of 21 and...

You are provided a fully saturated clay soil sample with a plasticity index of 21 and a liquid limit of 43. The dry unit weight, γd, of the sample is 1.62 Mg/m3 and the moisture content is 21%.

Calculate the following:

• γsat

• ρs

• e

Solutions

Expert Solution

Ally Wells answered 1 year ago

Next > < Previous

Related Solutions

An organic soil, the void ratio e is found to be 10.0 and GS is .2.35 If this soil is fully saturated, find:

An organic soil, the void ratio e is found to be 10.0 and GS is .2.35 If this soil is fully saturated, find:a. Unit weight of the soilb. water conten w%c. Does this soil sink in water?

IF a collected soil sample was classified as silty clay loamusing the Soil Analysis Chart (Figure...

IF a collected soil sample was classified as silty clay loamusing the Soil Analysis Chart (Figure 2 in the experiment description document), what properties would you expect in the sample? (You should mention properties such as the color, porosity, and potential nutrient availability of the soil).

Two soil samples fully saturated were collected from the field for testing in the lab, both...

Two soil samples fully saturated were collected from the field for testing in the lab, both having a natural void ratio of 0.6. The composition of the soil particles is as follows: Sample 1: Composed of ONLY quartz [3] Sample 2: Composed of 65% quartz, 23% mica &12% iron oxide. [4] The average value of specific gravity of soil particles is 2.65 for quartz, 3.0 for mica and 3.8 for iron oxide. Calculate the total unit weight of soil...

A falling-head permeameter containing a silty clay loam soil sample has a sample diameter of 10...

A falling-head permeameter containing a silty clay loam soil sample has a sample diameter of 10 cm, a falling-head tube of diameter 2 cm, and a sample length of 4 cm. If the initial head is 15 cm. It falls 4 cm over a period of 6 hours. (a) Find the hydraulic conductivity of the soil sample in m/s and ft/d. (b) What would be the hydraulic head after 12 hours? (c) How long would it take for the hydraulic...

The dimension of the soil sample of a cylindrical shape is provided in Figure 1. In...

The dimension of the soil sample of a cylindrical shape is provided in Figure 1. In its natural moist state, the soil sample has the total weight of 1350 g before the water content determination. The specific gravity, Gs of the soil is given as 2.72. The values obtained for the determination of water content are: The mass of moist soil sample + mass of empty can = 1.415 kg; the mass of fully dry soil sample + mass of...

A falling head permeability test was performed on a re-moulded silty clay soil sample 150 mm...

A falling head permeability test was performed on a re-moulded silty clay soil sample 150 mm in diameter and 250 mm in length. The diameter of the standpipe was 12.7 mm. At the start of the test, the height of the water in the standpipe measured 2,236 mm above the constant water level where the soil sample was immersed in. After 7 hours and 45 minutes, the height of the water in the standpipe was measured at 1971 mm. Determine:...

The manufacturing supervisor of Clay Stone Manufacturing Company has provided you with the details of manufacturing...

The manufacturing supervisor of Clay Stone Manufacturing Company has provided you with the details of manufacturing cost related to three processes - mixing, drying, and painting. The product of a company passes through three distinct processes to completion. 12,000 units have been issued to process mixing. The output of each process: Mixing:11,000 units Drying: 10,000 units Painting: 9,000 units. The normal loss incurred in each process is as follows: Mixing is 6% and the scrap value is RO 12 per...

You collected a sample of soil from your backyard to use for as a source of...

You collected a sample of soil from your backyard to use for as a source of inoculum for your isolate project, and want to use plating technique to determine the number of microbes present. Based on what you know about microbial cell counts in soil environments, you estimate that there might be up to 1010 cells per g of soil, but that in many soil samples only a small fraction (0.1-1%) of cells are typically able to be cultured on...

Calculate Liming Requirements. You have a soil sample with a CEC of 10 meq / 100...

Calculate Liming Requirements. You have a soil sample with a CEC of 10 meq / 100 g soil, a pH of 4.8 and a BS of 37%. You would like to raise this soil to a pH of 6.5, so you need to raise the BS to 65%. You also have a Mg deficiency. Assume 93% purity of your liming agent. During screening of a 100g sample, you had 1.5 g on the 8-mesh screen, and 13.4 g on the...

You are given a soil sample taken from the environment. Give examples of any Uranium isotopes...

You are given a soil sample taken from the environment. Give examples of any Uranium isotopes that may be present. What other long-lived isotopes may also be present in the sample? Briefly discuss what you understand by the term “decay chain”, giving some examples of the type of decay processes involved

Subjects