Question

In: Finance

The Clap Chemical Company needs a large insulated stainless steel tank to expand its plant. A...

The Clap Chemical Company needs a large insulated stainless steel tank to expand its plant. A recently closed brewery has offered to sell their tank for $15,000 delivered. The price is so low that Clap believes it can sell the tank at any future time and recover its $15,000 investment.

Installing the tank will cost $9000 and removing it will cost $5000. The outside of the tank is covered with heavy insulation that requires considerable maintenance. This will cost $3500 in year 1 and increase by $1000 per year.

(a) Based on a 12% before-tax MARR, what life of the insulated tank has the lowest EUAC?

(b) When the insulated tank is replaced by another tank is the replacement’s economic life likely to be shorter or larger? Explain.

Solutions

Expert Solution


Related Solutions

To clean the impeller blades of a stainless steel tank, plant technicians pour 210.0 L of...
To clean the impeller blades of a stainless steel tank, plant technicians pour 210.0 L of a 240.0 g HNO3/L solution in a 820.0-L tank to soak. When the tank needed to be emptied, the tank was first filled with water entering at a rate of 1.90 L/s. (Figure 1). At t = tF, the tank is completely full of solution. At this point water continued to enter the tank at the same rate, but solution was also drained from...
Sulfur dioxide, and only sulfur dioxide, is contained in a stainless steel tank. The temperature and...
Sulfur dioxide, and only sulfur dioxide, is contained in a stainless steel tank. The temperature and pressure inside the tank can be adjusted to any desired values. What is the maximal number of solid forms of sulfur dioxide that can exist inside the tank? If liquid sulfur dioxide is present, how many solid forms can exist? If instead of a liquid the vapor form of sulfur dioxide is present, how many solid forms can exist? Finally, suppose both a vapor...
U.S. Steel is considering a plant expansion to produce austenitic, precipitation hardened, duplex, and martensitic stainless...
U.S. Steel is considering a plant expansion to produce austenitic, precipitation hardened, duplex, and martensitic stainless steel round bars that is expected to cost $15 million now and another $10 million 1 year from now. If total operating costs will be $1.5 million per year starting 1 year from now, and the estimated salvage value of the plant is virtually zero, how much must the company make annually in years 1 through 8 to recover its investment plus a return...
U.S. Steel is considering a plant expansion to produce austenitic, precipitation hardened, duplex, and martensitic stainless...
U.S. Steel is considering a plant expansion to produce austenitic, precipitation hardened, duplex, and martensitic stainless steel round bars that is expected to cost $13 million now and another $10 million 1 year from now. If total operating costs will be $1.5 million per year starting 1 year from now, and the estimated salvage value of the plant is virtually zero, how much must the company make annually in years 1 through 10 to recover its investment plus a return...
Stainless Steel spoons are tested after manufacture with each test taking 10 minutes. If the plant...
Stainless Steel spoons are tested after manufacture with each test taking 10 minutes. If the plant makes 200,000 units a day and the quality Page 117-Sep-2018 assurance technologist recommends testing 1% of them to failure, is this sampling plan sensible? What would you recommend? Why?
A company is hoping to expand its facilities but needs capital to do so. In an...
A company is hoping to expand its facilities but needs capital to do so. In an effort to position itself for expansion in 3 years, the company will direct half of its profits into investments in a continuous manner. The company's profits for the past 5 years are shown in the table. The company's current yearly profit is $1,160,000. (The current year corresponds to t = 0.) Profit over the Past Five Years Years Ago 5 4 3 2 1...
A stainless steel alloy is to be analyzed for its chromium content. A 3.00 g sample...
A stainless steel alloy is to be analyzed for its chromium content. A 3.00 g sample of the steel is used to produce 250.0 mL of a solution containing Cr2O72−. A 10.0-mL portion of this solution is added to BaCl2(aq). When the pH of the solution is properly adjusted, 0.145 g BaCrO4(s)precipitates. What is the percent Cr, by mass, in the steel sample?​
An insulated heat exchanger uses geothermal water to heat water for a chemical plant. Water enters...
An insulated heat exchanger uses geothermal water to heat water for a chemical plant. Water enters the heat exchanger at a rate of 36 kg/s and is heated from 23 ∘∘C to 69 ∘∘C. The geothermal water enters the exchanger at a rate of 41.4 kg/s and at an initial temperature of 130 ∘∘C. The specific heat of the geothermal water is 4.31 kJ/(kg K). Determine the rate of heat transfer between the two streams and the rate of entropy...
A Chemical company has to expand its production capacity to cater its growing local and international...
A Chemical company has to expand its production capacity to cater its growing local and international market . it has to decide between a large plant and a small plant to be built to address the increasing demand. This is all that must be decided now. But if the company chooses to build a small plant, and then finds demand high during the initial period for two years, it has to expand its plant further. In making decisions, company executives...
A smooth steel sphere of specific gravity (SG) 7.82 and diameter25.4mmis dropped into a large tank...
A smooth steel sphere of specific gravity (SG) 7.82 and diameter25.4mmis dropped into a large tank of oil(r= 820kg/m3,μ=0.9Pa.s). Calculate the terminal velocity of the sphere noting that drag coefficient is a function of Reynolds number as shown in Figure 1 .Hint you will need to perform an iterative calculation.[Answer 1.2m/s without buoyancy or 1.1 m/s with buoyancy ]
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT