A 2000 v signle phase synchorunus generator isbeing used as a backup generator outside a diagnostic...

A 2000 v signle phase synchorunus generator isbeing used as a backup generator outside a diagnostic center in Islamabad . when the generator terminals are short circuited and a field exication current if 2.5 A is passed, the ammeter between the terminals read 100 A of full load current . if this terminals of the same generator are opened and the voltage across them is measured using a voltmeter , we get the value of 500V with the same exciatation cureent . the armature resistance is 0.8 ohms.

Determine the voltage regulation of this generator if it is delivering 100 A during normal operating with unity power factor , 100A with 0.8 leading PF and with 0.71 lagging PF

Expert Solution

Manojponduru answered 1 year ago

A 2000 V single-phase synchronous generator is being used as a backup generator outside a diagnostic...

A 2000 V single-phase synchronous generator is being used as a backup generator outside a diagnostic center. When the generator terminals are short-circuited and a field excitation current of 2.5 A is passed, the ammeter between the terminals read 100 A of full load current. If the terminals of the same generator are opened and the voltage across them is measured using a voltmeter, we get the value of 500 V with the same excitation current. The armature resistance is...

The terminal voltage across a single phase of a stepper motor used as a generator is...

The terminal voltage across a single phase of a stepper motor used as a generator is applied across a load resistor of 33 ohms. This terminal voltage has an amplitude of 18.7V and a frequency of 242 Hz. From a previous measurement, we know that this stepper motor phase has an internal resistance of 11.2 ohms. What is the time-averaged power delivered to the load? What is the electrical efficiency of this circuit? Write down an expression for the instantaneous...

A 280-V, 3Ø AC power system, Y-connected three-phase generator connected through a three-phase transmission line to...

A 280-V, 3Ø AC power system, Y-connected three-phase generator connected through a three-phase transmission line to a Y-connected load. The transmission line has an impedance of (0.02+j0.4) Ω/phase, and the load has an impedance of (4+j3) Ω per phase. Determine the;(a)line current (IL) at the load [2Marks] (b)line and phase voltage of the load[2 Marks](c)active power, reactive and apparent power [2 Marks](d) power factor and specify whether it is lagging or leading. [4 Marks]

A three phase, 60 Hz, 480 V, Y-connected, two-pole synchronous generator has a synchronous reactance of...

A three phase, 60 Hz, 480 V, Y-connected, two-pole synchronous generator has a synchronous reactance of 0.95 Ω per phase. Its armature resistance is negligible. Its combined friction and windage losses are 1.3 kW and its core losses are 0.95 kW. The field current is constant at no-load. Its full load armature current is 55 A at 0.9PF lagging. Assume phase voltage is a reference. Determine following: a) Its terminal voltage when it is loaded with the rated current at...

12.Larry decide to begin saving towards the purchase of a backup generator in 5 years. If...

12.Larry decide to begin saving towards the purchase of a backup generator in 5 years. If he puts $2,000 at the beginning of each of the next 5 years in a savings account paying 9 percent compounded quarterly, how much will you accumulate after 5 years? Note: You are only making 5 payments, and the first payment is today. a. $11,636.23 b. $13,046.67 c. $11,969.42 d. $12,043.17 e. $13,164.19

A 480 V, 50 Hz, Y-connected six-pole synchronous generator has a per-phase synchronous reactance of 1.0...

A 480 V, 50 Hz, Y-connected six-pole synchronous generator has a per-phase synchronous reactance of 1.0 Ω. Its full-load armature current is 60 A at 0.8 PF lagging. Its friction and windage losses are 1.5 kW and core losses are 1.0 kW at 60 Hz at full load. Assume that the armature resistance (and, therefore, the I2R losses) can be ignored. The field current has been adjusted such that the no-load terminal voltage is 480 V. a. What is the...

Present the single-phase equivalent circuit of a synchronous generator.

Diesel Generator A I MVA diesel three-phase generator is rated at 4.16 kV, 60 Hz, and...

Diesel Generator A I MVA diesel three-phase generator is rated at 4.16 kV, 60 Hz, and connected as Y its neutral is kept floating. It is directly tied to three loads, one consuming 50% of its capacity, and each of the other two consuming 25% of its capacity. A three-phase to ground fault could occur at any of the loads. Draw a one-line diagram of this system, then describe what type of faults could occur in the generator and diesel...

A 3-phase, 5 kVA, 208 V, 4-pole, 60 Hz, star-connected synchronous generator has negligible stator winding...

A 3-phase, 5 kVA, 208 V, 4-pole, 60 Hz, star-connected synchronous generator has negligible stator winding resistance and a synchronous reactance of 8 Ω per phase at the rated terminal voltage. The generator is connected in parallel to a 3-phase, 208 V, 60 Hz infinite bus. All losses may be neglected. a) Determine the excitation voltage and the power angle when the machine is delivering rated apparent power at 0.8 PF lagging. b) If the field excitation is increased by...

The output voltage of an AC generator is given by ?v = 121 V sin (32?t)....

The output voltage of an AC generator is given by ?v = 121 V sin (32?t). The generator is connected across a 0.007 H inductor. Find the following. (a) frequency of the generator?=____ Hz (b) rms voltage across the inductor?=____ V (c) inductive reactance?=____ ohms (d) rms current in the inductor?=____ A (e) maximum current in the inductor?=____ A (f) average power delivered to the inductor?=____ W (g) Find an expression for the instantaneous current. (Use the following as necessary:...

Question