Question

In: Mechanical Engineering

What is meant by condition monitoring of a pump

What is meant by condition monitoring of a pump

Solutions

Expert Solution

  • Condition monitoring is the process of monitoring a parameter of condition in machinery, such that a significant change is indicative of a developing failure. It is a major component of predictive maintenance. The use of conditional monitoring allows maintenance to be scheduled, or other actions to be taken to avoid the consequences of failure, before the failure occurs. It is typically much more cost effective than allowing the machinery to fail.
  • Condition monitoring in pumps can be applied for following.

1) To improve pump reliability through effective prediction. 2) To improve pump performance.

3) To minimize downtime through internal planning and scheduling of repair.

4) To maximize pump life by avoiding the condition that reduce pump life.

5) To ensure precision alignment and minimal lubricant contamination.

6) To reduce pump life cycle cost.

7) To achieve most economic operation.

8) To protect pump from failure due to closed valves, cavitations, dry running and low flow.

9) To eliminate teardown surprises.

10) To achieve impressive return on investment.


Related Solutions

What is meant by race-condition on ripple counter?
What is meant by race-condition on ripple counter?
What is meant by the word ‘cause’ in the following—necessary condition, sufficient condition, or mere tendency?
What is meant by the word ‘cause’ in the following—necessary condition, sufficient condition, or mere tendency?(a) Throwing a brick through a window causes it to break. (b) Slavery caused the American Civil War.(c) Exposure to the cold causes frostbite.(d) Running causes knee injuries.(e) Closing your eyes causes you not to be able to see.
(c) What is meant by the Marshall-Lerner condition? (d) Assuming the Marshall-Lerner condition holds, contrast the...
(c) What is meant by the Marshall-Lerner condition? (d) Assuming the Marshall-Lerner condition holds, contrast the factors that influence goods market equilibrium in an open economy with those of a closed economy.
What is meant by the golden rule level of capital? Explain what condition on the MPK...
What is meant by the golden rule level of capital? Explain what condition on the MPK is required if we are to have the golden rule. Explain why this condition is necessary. Finally, true or false: over time, the Solow model predicts that the capital stock approaches the golden-rule level.
What is involved in monitoring and controlling projects? What outputs of monitoring and controlling are common...
What is involved in monitoring and controlling projects? What outputs of monitoring and controlling are common to all knowledge areas? Discuss in 200 words.
A model centrifugal pump with impeller diameter 365 mm is tested at its design operating condition....
A model centrifugal pump with impeller diameter 365 mm is tested at its design operating condition. The test gives the following data when pumping water, speed = 870 rev/min head = 18.9 m capacity = 73.7 L/s efficiency = 89%. A geometrically similar pump is to be designed to pump a fluid with relative density 0.78 against a head of 85 m with a flow of 450 L/s. Determine: A) The impeller size? B) The speed? C) The power input...
Discuss business reasons for employee monitoring. What types of monitoring are allowed?
Discuss business reasons for employee monitoring. What types of monitoring are allowed?
Calculate discharge required for irrigation (Irrigation demand) for given condition. Also design well diameter to pump...
Calculate discharge required for irrigation (Irrigation demand) for given condition. Also design well diameter to pump calculated discharge for the soil of hydraulic conductivity 8.42 m/d of unconfined aquifer. Observation well, which is about 200 ft from well shows constant water table of aquifer is 100 ft. You are allowed to draw-down maximum 60 ft of water table when pumping discharge Irrigation Month = July Irrigation type = Surface Irrigation System = Graded Furrow and Corrugations Silty Clay Loam Soil...
1. What is screw pump? 2. working principle of screw pump. 3. screw pump test rig...
1. What is screw pump? 2. working principle of screw pump. 3. screw pump test rig 4. procedure 5. general use 6. identify its accuracy, precision and time respond in getting a reading. 7. the advantage and disadvantage of screw pump.
What is Network Performance Monitoring and Diagnostics? Why Network Performance Monitoring and Diagnostics? What are some...
What is Network Performance Monitoring and Diagnostics? Why Network Performance Monitoring and Diagnostics? What are some of the tools used? Which tools do you recommend? Why?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT