ASAP In this lab, you will make a digital thermometer using the SEN-11931 breakout board as...

ASAP In this lab, you will make a digital thermometer using the SEN-11931 breakout board as well as the 4-bank seven-segment LED display. Design the hardware connection of the SEN-11931, reuse the 4-bank 7-segment LED connection from Lab 4 for the mbed to read the temperature from the SEN-11931 and display the temperature in Fahrenheit degrees on the LED display in the format of xxx.x. Build your circuit and include all the required information about your hardware design in your lab report. You will also need to make the decision on whether pull-up resistors are needed. Based on the hardware you designed, write a code that takes temperature measurement every 5 seconds and display the temperature in Fahrenheit degrees in the format of xxx.x (for example: 098.6 or 104.8) on the 4-bank seven-segment LED display.

Solutions

Expert Solution

Manojponduru answered 1 year ago

Next > < Previous

Related Solutions

HARDWORK In this lab, you will make a digital thermometer using the SEN-11931 breakout board as...

HARDWORK In this lab, you will make a digital thermometer using the SEN-11931 breakout board as well as the 4-bank seven-segment LED display. Design the hardware connection of the SEN-11931, reuse the 4-bank 7-segment LED connection from Lab 4 for the mbed to read the temperature from the SEN-11931 and display the temperature in Fahrenheit degrees on the LED display in the format of xxx.x. Build your circuit and include all the required information about your hardware design in your...

For the rest of the lab, you will make the assumption that your data is approximately...

For the rest of the lab, you will make the assumption that your data is approximately normally distributed. Use Excel to answer the following questions for the Net Sales data. Copy and paste the output below, don’t include as a separate file, make sure your x axis is labelled properly. You will have to “insert” your graphs in the appropriate places below. Please don’t upload more than one file for me to open and grade, your entire lab should be...

Imagine that you are in chemistry lab and need to make 1.00L of a solution with...

Imagine that you are in chemistry lab and need to make 1.00L of a solution with a pH of 2.40. You have in front of you 100 mL of 6.00

Experimental Setup: Draw/describe how you will make voltage/current measurements in the lab using your orange multimeter...

Experimental Setup: Draw/describe how you will make voltage/current measurements in the lab using your orange multimeter (same device as last week). 1. Draw/describe how you will measure the voltage drop across a lightbulb in a circuit. Show/explain where you will put the black lead and the red lead from your orange multimeter and what setting you will have the device on to take this reading. 2. Draw/describe how you will measure the current through a lightbulb in a circuit. Show/explain...

You work in a medical research lab with a biochemist who asks you to make a...

You work in a medical research lab with a biochemist who asks you to make a 1.00 L phosphate buffer stock solution with pH = 7.4. The total phosphorus concentration is to be 0.250 M. In the storeroom, there are the following reagents: (1) a 3.00 M phosphoric acid stock solution, (2) solid sodium dihydrogen phosphate, (3) solid sodium monohydrogen phosphate, (4) solid, sodium phosphate, (5) a 3.00 M HCl(aq) stock solution, (6) a 3.00 M NaOH(aq) stock solution, and...

Imagine that you are in chemistry lab and need to make 1.00 L of a solution...

Imagine that you are in chemistry lab and need to make 1.00 L of a solution with a pH of 2.60. You have in front of you 100 mL of 7.00×10−2 M HCl, 100 mL of 5.00×10−2 M NaOH, and plenty of distilled water. You start to add HCl to a beaker of water when someone asks you a question. When you return to your dilution, you accidentally grab the wrong cylinder and add some NaOH. Once you realize your...

Imagine that you are in chemistry lab and need to make 1.00 L of a solution...

Imagine that you are in chemistry lab and need to make 1.00 L of a solution with a pH of 2.80. You have in front of you 100 mL of 7.00×10−2 M HCl, 100 mL of 5.00×10−2 M NaOH, and plenty of distilled water. You start to add HCl to a beaker of water when someone asks you a question. When you return to your dilution, you accidentally grab the wrong cylinder and add some NaOH. Once you realize your...

Imagine that you are in chemistry lab and need to make 1.00 L of a solution...

Imagine that you are in chemistry lab and need to make 1.00 L of a solution with a pH of 2.70. You have in front of you 100 mL of 7.00×10−2 M HCl, 100 mL of 5.00×10−2 M NaOH, and plenty of distilled water. You start to add HCl to a beaker of water when someone asks you a question. When you return to your dilution, you accidentally grab the wrong cylinder and add some NaOH. Once you realize your...

Imagine that you are in chemistry lab and need to make 1.00 L of a solution...

Imagine that you are in chemistry lab and need to make 1.00 L of a solution with a pH of 2.50. You have in front of you 100 mL of 7.00×10−2M HCl, 100 mL of 5.00×10−2M NaOH, and plenty of distilled water. You start to add HCl to a beaker of water when someone asks you a question. When you return to your dilution, you accidentally grab the wrong cylinder and add some NaOH. Once you realize your error, you...

Imagine that you are in chemistry lab and need to make 1.00 Lof a solution with...

Imagine that you are in chemistry lab and need to make 1.00 Lof a solution with a pH of 2.80. You have in front of you 100 mL of 7.00×10−2M HCl, 100 mL of 5.00×10−2M NaOH, and plenty of distilled water. You start to add HCl to a beaker of water when someone asks you a question. When you return to your dilution, you accidentally grab the wrong cylinder and add some NaOH. Once you realize your error, you assess...

Subjects