A peanut sits 8.0 cm away from the center of a turntable that is spinning at...

A peanut sits 8.0 cm away from the center of a turntable that is spinning at a rate of 200 rad/s. If it takes 15.0 s from the turntable to come to a stop at a constant rate, what is the direction relative to the vertical of the force exerted on the peanut by the turntable 14.7 s after the turntable has begun slowing down? With a diagram if possible.

Solutions

Expert Solution

***************************************************************************************************
This concludes the answers. If you need any more clarification, modification or correction, feel free to ask.

genius_generous answered 1 year ago

Next > < Previous

Related Solutions

A coin is placed on a flat turntable, a distance 18.6 cm from the center of...

A coin is placed on a flat turntable, a distance 18.6 cm from the center of rotation. The coefficient of static friction between the turntable and the coin is 0.8. At what maximum angular speed may the turntable be rotating before the force of friction is not able to keep the coin at the same distance from the axis? Hint: if you think a critical piece of information is missing, assign it a letter, and see if it cancels in...

1. A 5.40 g coin is placed 17.0 cm from the center of a turntable. The...

1. A 5.40 g coin is placed 17.0 cm from the center of a turntable. The coin has static and kinetic coefficients of friction with the turntable surface of μs = 0.810 and μk = 0.460. Part A: What is the maximum angular velocity with which the turntable can spin without the coin sliding? Express your answer with the appropriate units. 2. A 800 g ball moves in a vertical circle on a 1.09 m -long string. If the speed...

A turntable is off and is not spinning. A 1.5 g ant is on the disc...

A turntable is off and is not spinning. A 1.5 g ant is on the disc and is 18 cm away from the center. The turntable is turned on and 1.4 s later it has an angular speed of 33 rpm. Assume the angular acceleration is constant and determine the following quantities for the ant 0.7 s after the turntable has been turned on. Express all quantities using appropriate mks units. α = ω = v = atan = arad...

A coin is placed 18.0 cm from the axis of a rotating turntable of variable speed....

A coin is placed 18.0 cm from the axis of a rotating turntable of variable speed. When the speed of the turntable is slowly increased, the coin remains fixed on the turntable until a rate of 35.0 rp (revolutions per minute) is reached, at which point the coin slides off. Part A- What is the coefficient of static friction between the coin and the turntable? Express your answer using three significant figures.

A turntable of 0.8 m in diameter is spinning about its axis with an initial angular...

A turntable of 0.8 m in diameter is spinning about its axis with an initial angular velocity of 4 rad/s. If it experiences a constant angular acceleration of 3 rad/s 2 , find: A) The angle through which the turntable has travelled from 0 sec to 2 sec. B) The arc length the turntable’s rim has travelled from 0 sec to 2 sec. C) The tangential speed of the turntable’s rim at t=2 sec. D) The tangential acceleration of the...

A 1.80 x 10-3 kg coin is on the outer-most edge of a spinning turntable, which...

A 1.80 x 10-3 kg coin is on the outer-most edge of a spinning turntable, which has a radius, r, of 0.250 m. μs for the coin-turntable interface is 0.690. 1) The speed at the edge of the turn table is increased until the coin just starts to slide.This maximum speed, vmax , in m/s is: 2) If the period is held constant when vmax is reached and the coin is moved halfway between the center of the turntable and...

A person stands at the center of a turntable, holding his arms extended horizontally with a...

A person stands at the center of a turntable, holding his arms extended horizontally with a 1.5 kg dumbbell in each hand. He is set rotation about a vertical axis, making one revolution in 2 seconds. Find the new angular velocity if he pulls the dumbbells in to his middle. His moment of inertia (without dumbbells) is 3 kgm2 when his arms are out stretched, dropping to 2.2 kgm2 when his hands are at his middle. The dumbbells are 1...

A see-saw made from 4 meter board sits on a pivot at its center. A child...

A see-saw made from 4 meter board sits on a pivot at its center. A child weighing 280 N sits 1.75 m away from the center. A second child who weighs 330 N sits on the other side such that the board remains horizontal and steady. (a) What is the torque about the pivot point due to the weight of the first child? (b) how far from the center does the second child sit? (c) What is the force (magnitude...

A see-saw made from 4 meter board sits on a pivot at its center. A child...

A see-saw made from 4 meter board sits on a pivot at its center. A child weighing 280 N sits 1.75 m away from the center. A second child who weighs 330 N sits on the other side such that the board remains horizontal and steady. Now you come and push on the end of the seesaw nearest the second child with a force of 110 N. You don’t push straight up, but at an angle of 25° from the...

Batsheva sits on a spinning stool with her arms folded. What happens to her angular velocity...

Batsheva sits on a spinning stool with her arms folded. What happens to her angular velocity if she does not move her body and the stool spins without friction Eden and Ohad have the same mass. Eden sits at his desk in Rhode Island and Ohad sits at his desk in Ecuador (near the Equator). Who has more kinetic energy due to Earth’s rotation, Eden or Ohad, or is is the same A space probe is launched from Earth and...

Subjects