The switch in the figure below is open for t<0 and is then thrown closed at...

The switch in the figure below is open for t<0 and is then thrown closed at time t = 0. Assume R = 8.00 2, L = 8.00 H, and E

The switch in the figure below is open for t<0 and is then thrown closed at time t = 0. Assume R = 8.00 2, L = 8.00 H, and E = 15.0 V. Find the following as functions of time thereafter. Assume current is in A and time is in s. Use the following as necessary: t.)

(a) the current in the inductor

(b) the current in the switch

Solutions

Expert Solution

genius_generous answered 2 years ago

Next > < Previous

Related Solutions

The switch in the figure below is open for t < 0 and is then thrown...

The switch in the figure below is open for t < 0 and is then thrown closed at time t = 0. (a) Find the current in the inductor. (Use the following as necessary: L, R, t, and for .) IL = (b) Find the current in the switch as functions of time thereafter. (Use the following as necessary: L, R, t, and for .) Iswitch =

1) What is the battery current Ibat when the switch in the figure(Figure 1) is open?...

1) What is the battery current Ibat when the switch in the figure(Figure 1) is open? 2)What is the potential difference Vab between points a and b when the switch is open? 3)What is the battery current Ibat when the switch is closed? 4) What is the potential difference Vab between points a and b when the switch is closed?

The switch in the network in Fig. E7.17 opens at t=0. Find i(t) for t>0

(TCO 2) Describe how PLCs detect whether a switch is open or closed.

When switch S in the figure is open, the voltmeter V of the battery reads 3.08...

When switch S in the figure is open, the voltmeter V of the battery reads 3.08 V. When the switch is closed, the voltmeter reading drops to 2.98 V, and the ammeter A reads1.64 A. Assume that the two meters are ideal, so they don't affect the circuit.a) Find the emf.b) Find the internal resistance of the batteryc) Find the circuit resistance R.

The figure below shows an RC circuit. The capacitor is initially uncharged. At t = 0,...

The figure below shows an RC circuit. The capacitor is initially uncharged. At t = 0, the switch is closed to point a. Find the time it takes for the capacitor voltage to reach one third the battery voltage. Use the figure above. In the figure, the switch has been at point a for a long time and the capacitor voltage is equal to the battery voltage. At t = 0, the switch is moved to point b. Find the...

The switch in the figure below is connected to position a for a long time interval....

The switch in the figure below is connected to position a for a long time interval. At t = 0, the switch is thrown to position b. After this time, what are the following? (Let C = 1.30 µF.) (a) the frequency of oscillation of the LC circuit Hz (b) the maximum charge that appears on the capacitor µC (c) the maximum current in the inductor mA (d) the total energy the circuit possesses at t = 3.00 s µJ

In the figure below, the switch is left in position a for a long time interval...

In the figure below, the switch is left in position a for a long time interval and is then quickly thrown to position b. Rank the magnitudes of the voltages across the four circuit elements a short time thereafter from the largest to the smallest. a.ΔV1200 Ω > ΔVL > 12.0 V > ΔV12.0 Ω b.ΔVL > ΔV1200 Ω > 12.0 V > ΔV12.0 Ω c.ΔV1200 Ω > ΔVL = 12.0 V > ΔV12.0 Ω d.ΔV1200 Ω = ΔVL >...

Two marbles are launched at t=0 in the experiment illustrated in the figure below. Marble 1...

Two marbles are launched at t=0 in the experiment illustrated in the figure below. Marble 1 is launched horizontally with a speed of 4.15 m/s from a height h=0.910m. Marble 2 is launched from ground level with a speed of 5.87 m/s at an angle θ=45.0∘ above the horizontal. *Where would the marbles collide in the absence of gravity? Give the x coordinate of the collision point? *Where would the marbles collide in the absence of gravity? Give the y...

The switch in the figure (Figure 1) has been in position a for a long time. It is changed to position b at t=0s.

Part A What is the charge Q on the capacitor immediately after the switch is moved to position b? Express your answer using two significant figures. Q = ?C Part B What is the current I through the resistor immediately after the switch is moved to position b? Express your answer using two significant figures. I = mA Part C What is the charge Q on the capacitor at t=50?s? Express your answer using two significant figures....

Subjects