Problem Definition: You have to design a feedback controller for the Boost Converter that link a...

Problem Definition: You have to design a feedback controller for the Boost Converter that link a voltage source ?? = 80 ± 20% to a load with dc output voltage of 380V. The maximum output current is 2.5A.

Questions:

1- Design the Boost converter to satisfy the required output voltage and current.

a. Determine the inductance value for continuous conduction mode (CCM).

b. Determine a reasonable output voltage ripple and calculate the capacitance accordingly.

c. Justify any assumption you made.

d. In PSIM, run an open-loop simulation based circuit with diode, transistor for fixed input voltage and duty cycle. Repeat the simulation with different input voltages and duty cycles. Use pulse generator in PSIM to command the switch.

2- Derive the equations and average model for this boost converter.

3- Define the dc/dc converter transfer function and the compensated error amplifier general transfer function (Type-III).

4-Discuss how you design the controller of the boost converter.

5-Design any closed loop controller for your Boost converter. You might use any type of analog compensator or using PI controller with manual tuning. Implement a variable step voltage source and show the response of the controller. Output voltage should be kept at 380V while the input voltage changes between 80 ± 20% (example: start the simulation with 80V and set the step voltage source to jump into 85V or 90V at t=2 s).

Expert Solution

ekkarill92 answered 2 years ago

Design a buck-boost converter with a source varying from 10 to 14 V. The output voltage...

Design a buck-boost converter with a source varying from 10 to 14 V. The output voltage is regulated at – 12 V. The load varies from 10 to 15 W. The output voltage ripple must be less than 1 % for any operating condition. a) Determine the range of the duty ratio of the switch. b) Design the inductor and capacitor values used in your design. c) Confirm your solutions using a simulation software for every operating condition (you must...

Problem: Design and write a C language program that can be used as a unit converter...

Problem: Design and write a C language program that can be used as a unit converter application. Your unit converter should contain at least four unit categories, for example: length, mass, temperature, and time. The program should display the main menu that contains unit categories that are available, and the user will be prompted to select a unit category first. After the unit category has been selected the program should then display another menu (i.e., a submenu) that contains at...

Design an ER Diagram for the given problem. Link the tables that are related and implement...

Design an ER Diagram for the given problem. Link the tables that are related and implement your design using MySQL. Insert at least a minimum of 5 records. Ensure that the data to be added are related to other tables. Post here the screenshot of the following: Entity Relationship Diagram with attributes, PK, and FK. Use the "describe" command to view the structure of the tables. Use the "select" command to view the contents of the tables. Company ABC has...

Source Problem: Design a grounded-load v-I converter that converts a 0V to 10V input to a...

Source Problem: Design a grounded-load v-I converter that converts a 0V to 10V input to a 4mA to 20mA output. The circuit is to be powered from +/-15V regulated supplies. My Question: What does it mean by a grounded-load? I am not really familiar with this term.

Problem 2: The Promotion You have been working for a corporation as the controller for just...

Problem 2: The Promotion You have been working for a corporation as the controller for just a year. The CFO is moving to another state next month and you have been offered the job. Company background: Just recently the company has decided to go public. Your background: You have been with the company one year, a licensed CPA who spent 4 years in public accounting. Your plan was in 5 years becoming a CFO for this company or another company....

A company asks you to design a controller for a basketball machine that will indicate that...

A company asks you to design a controller for a basketball machine that will indicate that a player has won a game if they get a total of 3 points. There are two sensors in this machine. One in the backboard and on the inside of the orange rim. If a player shoots a shot and the ball hits the backboard and the ball goes through the rim, then the play will gain 1 point. If the player shoots the...

In the light of engineering design processes and problem solving methodology, expand on the following; Definition...

In the light of engineering design processes and problem solving methodology, expand on the following; Definition of the problem Gathering of information Generation of alternative solution Evaluation of alternatives Solution of the problem Communication of the results

Project Summary A company asks you to design a controller for a basketball machine that will...

Project Summary A company asks you to design a controller for a basketball machine that will indicate that a player has won a game if they get a total of 3 points. There are two sensors in this machine. One in the backboard and on the inside of the orange rim. If a player shoots a shot and the ball hits the backboard and the ball goes through the rim, then the play will gain 1 point. If the player...

What strengths and challenges may you have as a writer? Based on feedback you have received...

What strengths and challenges may you have as a writer? Based on feedback you have received on your writing, what specific areas of writing are difficult for you or need improvement? What are some steps you can take to improve your writing skills? What type of writing have you done in the past? What is your favorite type of writing? How will the writing you have done in the past differ from the writing you will do throughout your program...

If you want to conduct 2*2 latin Square Design (LSD) what problem you will have to...

If you want to conduct 2*2 latin Square Design (LSD) what problem you will have to face to analysis the data? How will you overcome this problem?

Question