Question

In: Physics

Four capacitors are arranged in the circuit shown in the figure.The capacitors have the values...

Four capacitors are arranged in the circuit shown in the figure. The capacitors have the values C1 = 39.5 μF, C2 = 13.5 μF, C3 = 45.5 μF, C4 = 85.5 μF, and the power supply is set at voltage V = 16.5 V.

What is the equivalent capacitance of the circuit?

What is the charge on capacitor C3?

What is the potential difference across capacitor C4?

What is the potential energy stored in capacitor C2?


Solutions

Expert Solution

a)

C2 ,C3 and C4 are in series ,so

C1 and C234 are in parallel

b)

Total Charge

Charge on C2 ,C3 and C4 are same

c)

Potential difference across C4 is

d)

Potential energy stored in C2 is

genius_generous answered 2 years ago
Next > < Previous

Related Solutions

Four capacitors are arranged in the circuit shown in the figure
Four capacitors are arranged in the circuit shown in the figure. The capacitors have the values C1 = 23.5 μF, C2 = 45.5 μF, C3 = 50.5 μF, and C4 = 40.5 μF, and the power supply is at voltage V = 27.5 V. What is the equivalent capacitance of the circuit? equivalent capacitance: _______  μF What is the charge on capacitor C2? charge on C2:_______  CWhat is the potential difference across capacitor C3? potential difference across C3: _______ VWhat is the potential energy stored...
Three capacitors are arranged as shown as a portion of a complete circuit. ?2 and ?3...
Three capacitors are arranged as shown as a portion of a complete circuit. ?2 and ?3 are wired in parallel, and then the system of (?2 + ?3) is wired in series to capacitor ?1. The capacitances of each capacitor are ?1 = 5.1 ??, ?2 = 4.8 ??, and C3= 6.2 ??. There is an unknown potential difference between points a and b. a. What is the equivalent capacitance of the system? b. If the charge on ?2 is...
Four capacitors are placed within an 18.0 V circuit as follows: Two capacitors 30.0 μF and...
Four capacitors are placed within an 18.0 V circuit as follows: Two capacitors 30.0 μF and 65.0 μF are connected in series with the battery, followed by two capacitors 45.0 μF and 80.0 μF connected in parallel. 1. You must draw and completely label the circuit. 2. Then find the charge stored on and the voltage across each capacitor within the circuit.
Consider the circuit shown inthe figure. Suppose the four resistors in this circuit have the...
Consider the circuit shown in the figure. Suppose the four resistors in this circuit have the values R1 = 12 Ω , R2 = 7.3 Ω , R3 = 6.2 Ω , and R4 = 14 Ω , and that the emf of the battery is E = 15 V.Part A.Find the current through each resistor using the rules for series and parallel resistors.Part B. Find the current through each resistor using Kirchhoff's rules. 
For the system of four capacitors shown in the figure below, find the following. (Use C1...
For the system of four capacitors shown in the figure below, find the following. (Use C1 = 1.00 μF, C2 = 4.00 μF, C3 = 2.00 μF. and C4 = 3.00 μF for the figure.) (a) the total energy stored in the system (b) the energy stored by each capacitor (c) Compare the sum of the answers in part (b) with your result to part (a) and explain your observation.
For the system of four capacitors shown in the figure below, find the following. (Use C1...
For the system of four capacitors shown in the figure below, find the following. (Use C1 = 1.0
A circuit is constructed with four resistors, one capacitor, onebattery and a switch as shown....
A circuit is constructed with four resistors, one capacitor, one battery and a switch as shown. The values for the resistors are: R1 = R2 = 32 Ω, R3 = 90 Ω and R4 = 89 Ω. The capacitance is C = 85 μF and the battery voltage is V = 12 V. The positive terminal of the battery is indicated with a + sign.1) The switch has been open for a long time when at time t = 0,...
Consider the system of capacitors shown in the figure below
Consider the system of capacitors shown in the figure below (C1 = 4.00 μF,C2 = 2.00 μF). (a) Find the equivalent capacitance of the system.  (b) Find the charge on each capacitor.  (c) Find the potential difference across each capacitor (d) Find the total energy stored by the group.
The circuit you’re making needs a 1.5?? capacitor but you only have three 1?? capacitors. Draw...
The circuit you’re making needs a 1.5?? capacitor but you only have three 1?? capacitors. Draw how you make an equivalent capacitor from the 1?? capacitors.
A circuit is constructed with four resistors, one inductor, one battery and a switch as shown....
A circuit is constructed with four resistors, one inductor, one battery and a switch as shown. The values for the resistors are: R1 = R2 = 56 Ω, R3 = 45 Ω and R4 = 91 Ω. The inductance is L = 255 mH and the battery voltage is V = 24 V. 1) The switch has been open for a long time when at time t = 0, the switch is closed. What is I1(0), the magnitude of the...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT