Question

In: Physics

What is the code requirement for receptacles connected to circuits of different voltages and installed in...

What is the code requirement for receptacles connected to circuits of different voltages and installed in one building?

Solutions

Expert Solution

This National Electrical Code (NEC) defines some least quantity of electrical crates provided for a some building varieties, especially staying house parts. Most electrical codes define the maximum range among containers within a room, so a lamp either device by a regular length cable is usually located wherever round the room boundary without mistreatment an expansion cord.

Codes further define the number of receptacles(containers) by area additionally the highest variety like containers through a circuit, to restrict overloading cables among extreme progress of current. The NEC and model building codes normally define that no larger than 645 sq. cm (100 sq. in.) of electrical crates are frequently placed in per nine.3 sq. meters (100 sq. ft) of wall exterior.
An electrical container is described through the NEC as “a contact equipment connected through the terminal for the connection of a individual addition connection.” Here involves ordinary wall sockets and larger, extra difficult devices. Both are recognized as convenience container sockets, container plugs, or convenience plugs.
Containers connected at a regular 15-A or 20-A section circuit need signify of the grounding kind. Containers
attached on various voltages, frequencies, or current models (fluctuating vs. direct current, AC vs. DC) at that likewise assumptions should be polarized. Containers do normally 20-A, 125V, yet denote accessible from 10 A to 400 A, also of 125V to 600V. Locking, explosion-proof, tamper-proof, and ornamental fashion containers do ready. Any units, like alter containers, are created to particular methods. Split-wired containers should one plug that's continuously energized, including a second controlled by a wall switch. Those are seldom utilized for a lamp, with the switch near the entry to the room.
Containers are generally positioned among 30 and 46 cm (12–18 in.) on ceiling of the polished floor. In stores, labs, and several areas with tables upon walls, both are installed at 107 cm (42 in.) over that ground. Containers over room counters are mounted 122 cm (4 ft) on roof of the finished floor. In accessible areas, the Americans by Disabilities Act Accessibility guidelines (ADAAG) needs a least 38 cm (15 in.) height for retailers, with plugs over kitchen shelves at 107 cm (42 in.) beyond the floor. anywhere work areas are expected to do available, as in public library carrels and office workstations, the containers ought to be located beyond the work surface whenever possible, or alternatively below the first fringe of the work surface. this needs thoughtful preparation


Related Solutions

When measuring voltages using electrodes, Why voltages differ for different solutions and why voltages change with...
When measuring voltages using electrodes, Why voltages differ for different solutions and why voltages change with time? and which electrode of the two that you used (Al and Cu) oxidizes more and which oxidizes less? Which direction (from one electrode to another) do electrons flow when two electrodes are connected?
What are the different types of bond requirement in the construction industry?
What are the different types of bond requirement in the construction industry?
Compare series circuits and parallel circuits. What are three differences between series circuits and parallel circuits?...
Compare series circuits and parallel circuits. What are three differences between series circuits and parallel circuits? What are some advantages of using parallel circuits instead of series circuits? Answer in 1-2 paragraphs.
which circuits must not be connected to any system containing trolley wires with a ground return?...
which circuits must not be connected to any system containing trolley wires with a ground return? a. ground wires b. grounding conductors c.circuits for lighting and power d. ungrounded trolley wires
1) What is the difference between “Series Circuits” and “Parallel Circuits” 2) What kind of information...
1) What is the difference between “Series Circuits” and “Parallel Circuits” 2) What kind of information can be obtained from a simple circuit by applying the Kirchhoff's low for junctions, but the Kirchhoff's low for loops? 3) In what type of circuits we use the Kirchhoff's low for junctions, but the Kirchhoff's low for loops?
The drawing shows three different resistors in two different circuits. The battery has a voltage of...
The drawing shows three different resistors in two different circuits. The battery has a voltage of V = 20 V, and the resistors have resistances of R1 = 50.0 ?, R2 = 25.0 ? and R3 = 10.0 ?. Determine the current through and the voltage across each resistor.
What is the operational difference between combinational circuits, storage elements, and sequential circuits?
What is the operational difference between combinational circuits, storage elements, and sequential circuits?
Describe what is a system requirement, what is a software requirement and what is the relationship...
Describe what is a system requirement, what is a software requirement and what is the relationship between them?
The response time in milliseconds was determined for three different types of circuits in an electronic...
The response time in milliseconds was determined for three different types of circuits in an electronic calculator. The results are recorded in table: Curcuit Type Response (R) R R R R 1 19 22 20 18 25 2 20 21 33 27 40 3 16 15 18 26 17 (a) What is the value of LSD? Use α=0.01. Round your answer to two decimal places (e.g. 98.76). (b) Apply Fisher's LSD method with α=0.01 and state which circuit type differs...
1. what is an end effector? Describe different types of grippers and tools that are connected...
1. what is an end effector? Describe different types of grippers and tools that are connected to manipulator. 2. explain different types of sensors used in robotic system. 3. list the applications of robotics and explain briefly. 4. Define the following     a. load carrying capacity     b. work volume     c. end effector Please provide the answers for the above questions which are related to ROBOTICS
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT