Question

Can you draw a network diagram for this? In VISO would be an extra bonus There are two available rooms, named RH230 and RH231, in your building. You are asked to set up a server room in RH230 and a computer lab in RH231. Design a Local area network that satisfies the following conditions.  You have two 8-port switches.  Cables as you need.  Four server machines in RH230: Gateway server, DNS server, DHCP server, and Web server. Computer names are GWsrv, dns, dhcp, and websrv, respectively.  One client PC in RH230. Computer name: client-0  Six client PCs in RH231. Computer names: client-1, client-2, client-3, client-4, client-5, and client-6  The server room (RH230) has an Ethernet port on a wall to connect to the building's (local area) network o The building's LAN is the external network for your LAN and has Internet access. o The building's LAN has an (existing) DNS server outside of your rooms (i.e., RH230 and RH231) o The IP address of the external DNS server is 192.168.1.2/24  You can install cables between RH230 and RH231 under the floorboards.  All computers in your LAN should have Internet access.  Static IP addresses cannot be assigned to clients in both RH230 and RH231.  You are allowed to use 172.30.22.0/26 for your LAN o One of the network interface cards (NICs) on your gateway server uses 172.30.22.1/26 o The other NIC is set to receive an IP address dynamically by DHCP server in 192.168.1.0/24 o A static IP: 172.30.22.13/26 is used for your DHCP server. o A static IP: 172.30.22.14/26 is used for your DNS server. o A static IP: 172.30.22.15/26 is used for your Web server. In the diagrams, describe your network clearly so that any network administrator can build the exact same network you specified without looking at this assignment sheet. For example, the diagram should include information such as Computer names, actual locations of Switches, each NIC's configuration for servers and clients, "accurate" Dynamic IP address range for the DHCP server. You can draw the diagram for RH230 and RH231 in separate sheets. However, your diagram must clearly indicate the connection between the networks in the rooms and the connection to the Internet (if the room has).

Answer 1

• 

• 

Let me know if you have any doubts or if you need anything to change. 

If you are satisfied with the solution, please leave a +ve feedback : ) Let me know for any help with any other questions.

Thank You!
===========================================================================