Question

In: Advanced Math

a spherical vessel with a diameter of 2cm when empty, has a mass of 2.00g. what...

a spherical vessel with a diameter of 2cm when empty, has a mass of 2.00g. what is the greatest volume of water that can be placed in the vessel and still have the vessel float at the surface of water?

Solutions

Expert Solution


Related Solutions

A spherical vessel (diameter = 5.00 cm) when empty has a mass of 12.00 g. What...
A spherical vessel (diameter = 5.00 cm) when empty has a mass of 12.00 g. What is the greatest volume of water in mL that can be placed in the vessel and still have the vessel float at the surface of benzene? (Given: density of water = 1.00 g/cm3; density of benzene = 0.879 g/cm3)
A certain spherical eukaryotic cell has a diameter of 51um. If a spherical organelle has a...
A certain spherical eukaryotic cell has a diameter of 51um. If a spherical organelle has a diameter of 860nm, how many of these organelles can the cell hold.
Pure gaseous hydrogen at 10 atm is stored in a 10-cm-diameter, spherical steel pressure vessel having...
Pure gaseous hydrogen at 10 atm is stored in a 10-cm-diameter, spherical steel pressure vessel having a wall thickness of 3 mm. The solubility of H2 in steel under these conditions is 0.085 m3 (STP)/(m3 of solid . atm) and the diffusivity of H2 in steel at 300oC is 3.8x10-10 m2 /s (independent of pressure). You may assume that the H2 partial pressure outside the vessel is zero. a) Calculate the steady–state rate of leakage (in kmol/h) of H2 from...
Pure gaseous hydrogen at 10 atm is stored in a 10-cm-diameter, spherical steel pressure vessel having...
Pure gaseous hydrogen at 10 atm is stored in a 10-cm-diameter, spherical steel pressure vessel having a wall thickness of 3 mm. The solubility of H2 in steel under these conditions is 0.085 m3 (STP)/(m3 of solid . atm) and the diffusivity of H2 in steel at 300oC is 3.8x10-10 m2 /s (independent of pressure). You may assume that the H2 partial pressure outside the vessel is zero. a) Calculate the steady–state rate of leakage (in kmol/h) of H2 from...
The mass of a 270. mL beaker is 178 g when empty. Determine its mass when...
The mass of a 270. mL beaker is 178 g when empty. Determine its mass when filled with the following substances. (a) water (density 0.9970 g/cm3 at 20°C) ____ g (b) alcohol (density 0.7893 g/cm3 at 20°C) ____ g (c) mercury (density 13.546 g/cm3 at 20°C) ____ g (d) Explain why mercury containing pollutants are usually found in the mud at the bottom of a lake of stream. -Mercury has a negative charge and is attracted to the positively charged...
When a can of beer is both full and empty, the center of mass is in...
When a can of beer is both full and empty, the center of mass is in the center of the can. As you drink your beer, however, the center of mass lowers to some minimum point, before returning back to the center. What is that minimum point?   
A vertical vessel with an internal diameter of 84” has a hemispherical head at the top...
A vertical vessel with an internal diameter of 84” has a hemispherical head at the top and an ellipsoidal head of 2:1 at the bottom. The construction material has a maximum allowable stress of 8700 psi at its design temperature. The operating pressure is stated as 48 psig. The overall height of the vessel is 38‟ and a joint efficiency of 1.0 is used. ) Determine the wall thickness of each part of the vessel. b) If a corrosion allowance...
Vasoconstriction is to a decrease in blood vessel diameter, as __________ is to an increase in...
Vasoconstriction is to a decrease in blood vessel diameter, as __________ is to an increase in blood vessel diameter.
A rigid, insulated, empty vessel is to be filled with steam from a steam line at...
A rigid, insulated, empty vessel is to be filled with steam from a steam line at 7 bar and 320°C. Steam flows into the vessel until the pressure in the vessel is 7 bar. At this instant the valve on the charging line is closed. (a)  What is the temperature of the steam in the vessel at the instant the valve is closed? (b)  What is the final pressure of the steam in the vessel after it has reached mutual stable equilibrium...
A sample of solid CaCO3 is added to an empty reaction vessel, which is then sealed....
A sample of solid CaCO3 is added to an empty reaction vessel, which is then sealed. After awhile, the following reaction reaches a state of dynamic equilibrium. CaCO3(s)---------> CaO(s) + CO2(g), H = 178 kJ (per mol CO2) Briefly explain how the equilibrium values of the mass of CaO and the pressure of CO2 are affected by the following actions. a) increasing the temperature b) removing a small amount, but not all, of the CaCO3 c) transferring the equilibrium mixture...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT