Design an active low pass filter with a corner frequency of 50 Hz and amplification of 10

Design an active low pass filter with a corner frequency of 50 Hz and amplification of 10. Pick the values of the resistor and capacitor based on your own judgement to keep the cost reasonably low (simpler circuit design with less components is better).

Solutions

Expert Solution

Manojponduru answered 1 year ago

Next > < Previous

Related Solutions

Design an active low-pass filter with a gain of 10 and that can reject 120 Hz...

Design an active low-pass filter with a gain of 10 and that can reject 120 Hz signals. What are the parameters for this design? Please show all work. Thank you.

Design a bandpass active filter to pass frequencies between 700 Hz and 2100 Hz, and with...

Design a bandpass active filter to pass frequencies between 700 Hz and 2100 Hz, and with K= 63. Please include the transfer function, blot plot, multisim, and the matlab code.

Design and build an active second order low pass filter with cut off frequency of 8kHz...

Design and build an active second order low pass filter with cut off frequency of 8kHz using opamp -Show circuit diagram -Show input voltage and frequency - Show all calculations and placement of indicator to measure output frequency to measure cut off

Butterworth filter a)Design a 5th order low pass Butterworth low-pass filter with a cut-off frequency of...

Butterworth filter a)Design a 5th order low pass Butterworth low-pass filter with a cut-off frequency of 1592 Hz and a dc gain of 3dB. Find and present the mathematical transfer function of the filter, showing all your steps. b) Write a Matlab code to plot the magnitude of this function with a linear scale in dB units on the ordinate, and a log scale of frequency on the abscissa. The plot range should be: ordinate- linear scale from -100dB to...

Design an active high pass filter with a high frequency gain of 5 and a cutoff...

Design an active high pass filter with a high frequency gain of 5 and a cutoff frequency of 2kHz. Use a 0.1 uF capacitor in your design.

Create a 2nd order Butterworth 150 Hz frequency low pass filter. Please provide transfer function and...

Create a 2nd order Butterworth 150 Hz frequency low pass filter. Please provide transfer function and frequency response. Thank you

Design a 3-pole Butterworth low-pass filter with a DC gain of 5 and a -3db frequency...

Design a 3-pole Butterworth low-pass filter with a DC gain of 5 and a -3db frequency of 550Hz. design should use capacitors of the following values: 0.01uf, 0.022uf, 0.033uf, 0.047uf, 0.056uf, 0.1uf, 0.22uf, and 1uf.

Design a first order, high pass active filter with a cutoff frequency of 20 krad/sec. Cascade...

Design a first order, high pass active filter with a cutoff frequency of 20 krad/sec. Cascade Four of this filter designed and find reasonable values for the resistor and capacitor. Obtain the transfer function and show a circuit schematic for your filter. Plot the Bode plot

Design a state Variable Filter that has a corner frequency of 100 KHz and a quality...

Design a state Variable Filter that has a corner frequency of 100 KHz and a quality factor (Q) of 20. Assume both the frequency-determining resistors and capacitors are equal.

Designa low-pass filter that reduces magnitude of H(jw) to 0.4 for the signal with 10(X+4)Hz. a)Use...

Designa low-pass filter that reduces magnitude of H(jw) to 0.4 for the signal with 10(X+4)Hz. a)Use 10 Ω resistor and calculate the value of the inductance of the filter. Calculate the cutoff frequency of the filter .b)Design another filter for the same purpose by using the same resistorcombined with a capacitor.Find the value of the capacitance.Find the magnitudes of H(jw) for 2Hz and 200 Hz frequencies and sketch the frequency response graph of the filter c)(20+Y)Ωresistive loadis connected across the...

Subjects