Design an active low-pass filter with a gain of 10 and that can reject 120 Hz...

Design an active low-pass filter with a gain of 10 and that can reject 120 Hz signals. What are the parameters for this design?

Please show all work. Thank you.

Solutions

Expert Solution

Manojponduru answered 1 year ago

Next > < Previous

Related Solutions

Design an active low pass filter with a corner frequency of 50 Hz and amplification of 10

Design an active low pass filter with a corner frequency of 50 Hz and amplification of 10. Pick the values of the resistor and capacitor based on your own judgement to keep the cost reasonably low (simpler circuit design with less components is better).

Design a bandpass active filter to pass frequencies between 700 Hz and 2100 Hz, and with...

Design a bandpass active filter to pass frequencies between 700 Hz and 2100 Hz, and with K= 63. Please include the transfer function, blot plot, multisim, and the matlab code.

Design an active high pass filter with a high frequency gain of 5 and a cutoff...

Design an active high pass filter with a high frequency gain of 5 and a cutoff frequency of 2kHz. Use a 0.1 uF capacitor in your design.

a high pass rc filter can be changed to a low pass filter by

Design a 3-pole Butterworth low-pass filter with a DC gain of 5 and a -3db frequency...

Design a 3-pole Butterworth low-pass filter with a DC gain of 5 and a -3db frequency of 550Hz. design should use capacitors of the following values: 0.01uf, 0.022uf, 0.033uf, 0.047uf, 0.056uf, 0.1uf, 0.22uf, and 1uf.

Design and build an active second order low pass filter with cut off frequency of 8kHz...

Design and build an active second order low pass filter with cut off frequency of 8kHz using opamp -Show circuit diagram -Show input voltage and frequency - Show all calculations and placement of indicator to measure output frequency to measure cut off

Butterworth filter a)Design a 5th order low pass Butterworth low-pass filter with a cut-off frequency of...

Butterworth filter a)Design a 5th order low pass Butterworth low-pass filter with a cut-off frequency of 1592 Hz and a dc gain of 3dB. Find and present the mathematical transfer function of the filter, showing all your steps. b) Write a Matlab code to plot the magnitude of this function with a linear scale in dB units on the ordinate, and a log scale of frequency on the abscissa. The plot range should be: ordinate- linear scale from -100dB to...

ı need an explanation filter types sound related ( low-pass, high pass, bandpass, band reject) but...

ı need an explanation filter types sound related ( low-pass, high pass, bandpass, band reject) but what ı need is not contactor projection, more written explanation

Designa low-pass filter that reduces magnitude of H(jw) to 0.4 for the signal with 10(X+4)Hz. a)Use...

Designa low-pass filter that reduces magnitude of H(jw) to 0.4 for the signal with 10(X+4)Hz. a)Use 10 Ω resistor and calculate the value of the inductance of the filter. Calculate the cutoff frequency of the filter .b)Design another filter for the same purpose by using the same resistorcombined with a capacitor.Find the value of the capacitance.Find the magnitudes of H(jw) for 2Hz and 200 Hz frequencies and sketch the frequency response graph of the filter c)(20+Y)Ωresistive loadis connected across the...

4)Design a band-pass filter with a passband from 500 Hz to 2000 Hz using “butter” routine...

4)Design a band-pass filter with a passband from 500 Hz to 2000 Hz using “butter” routine of MATLAB. Assume a sampling frequency of 8KHz. Let the filter order be M=4. Plot the magnitude response and provide the filter coefficients and the transfer function

Subjects