Design and build an active second order low pass filter with cut off frequency of 8kHz...

Design and build an active second order low pass filter with cut off frequency of 8kHz using opamp

-Show circuit diagram

-Show input voltage and frequency

- Show all calculations and placement of indicator to measure output frequency to measure cut off

Solutions

Expert Solution

Manojponduru answered 1 year ago

Next > < Previous

Related Solutions

Butterworth filter a)Design a 5th order low pass Butterworth low-pass filter with a cut-off frequency of...

Butterworth filter a)Design a 5th order low pass Butterworth low-pass filter with a cut-off frequency of 1592 Hz and a dc gain of 3dB. Find and present the mathematical transfer function of the filter, showing all your steps. b) Write a Matlab code to plot the magnitude of this function with a linear scale in dB units on the ordinate, and a log scale of frequency on the abscissa. The plot range should be: ordinate- linear scale from -100dB to...

Design a second order (two pole) high-pass filter for the following specifications Cut-off frequency, fo or...

Design a second order (two pole) high-pass filter for the following specifications Cut-off frequency, fo or fH = 2kHz Maximally Flat, i.e. Q=1/√2 > Justify any assumption you make. > Draw circuit with all designed values. > Draw the frequency response (Gain magnitude only)

Using a general Op-Amp 741, design a first order and a second-order low-pass filter with cut...

Using a general Op-Amp 741, design a first order and a second-order low-pass filter with cut off frequent of 5kHz. Subject sinusoidal inputs with frequency from 1kHz to 10kHz and plot the frequency responses for both the filters and provide your opinion.

Q1: Design a 9th order low-pass filter with cut-off ?? /2 using the Hanning window. a)...

Q1: Design a 9th order low-pass filter with cut-off ?? /2 using the Hanning window. a) Plot its frequency response. b) Express the Input/ Output relation. c) let ??[??]{ 0 ??or ??=0,1,2…..,10 {1 ??or ??=11,12,…..30 Calculate ??=????. Plot and comment on the shape of y. Q2: Design a 9th order high-pass filter with cut-off ??/ 4 using the Hanning window. a) Plot the frequency response. b) Express the Input/ Output relation. c) let ??[??]={ 0 ??or ??=0,1,2…..,10 {1...

Design a 9th order low-pass filter with cut-off ??/ 2 using the Hanning window. a) Plot...

Design a 9th order low-pass filter with cut-off ??/ 2 using the Hanning window. a) Plot its frequency response. b) Express the Input/ Output relation. c) let ??[??] = { 0 ?????? ?? = 0,1,2…..,10 1 , ?????? ?? = 11,12,…..30 Calculate ?? = ?? ? ?. Plot and comment on the shape of y.

Design an active low pass filter with a corner frequency of 50 Hz and amplification of 10

Design an active low pass filter with a corner frequency of 50 Hz and amplification of 10. Pick the values of the resistor and capacitor based on your own judgement to keep the cost reasonably low (simpler circuit design with less components is better).

Design a first order, high pass active filter with a cutoff frequency of 20 krad/sec. Cascade...

Design a first order, high pass active filter with a cutoff frequency of 20 krad/sec. Cascade Four of this filter designed and find reasonable values for the resistor and capacitor. Obtain the transfer function and show a circuit schematic for your filter. Plot the Bode plot

Question