Question

In: Accounting

FIFO Method, Two-Department Analysis Healthway uses a process-costing system to compute the unit costs of the...

FIFO Method, Two-Department Analysis

Healthway uses a process-costing system to compute the unit costs of the minerals that it produces. It has three departments: Mixing, Tableting, and Bottling. In Mixing, at the beginning of the process all materials are added and the ingredients for the minerals are measured, sifted, and blended together. The mix is transferred out in gallon containers. The Tableting Department takes the powdered mix and places it in capsules. One gallon of powdered mix converts to 1,600 capsules. After the capsules are filled and polished, they are transferred to Bottling where they are placed in bottles, which are then affixed with a safety seal and a lid and labeled. Each bottle receives 50 capsules.

During July, the following results are available for the first two departments (direct materials are added at the beginning in both departments):

Mixing Tableting
Beginning inventories:
  Physical units 5 gallons 4,000 capsules
  Costs:
    Direct materials $120 $32
    Direct labor 128 20
    Overhead ? ?
    Transferred in 140
Current production:
  Transferred out 125 gallons 198,000 capsules
  Ending inventory 6 6000
  Costs:
    Direct materials $3,144 $1,584
    Transferred in ?
    Direct labor 4,096 1,944
    Overhead ? ?
Percentage of completion:
  Beginning inventory 40 % 50 %
  Ending inventory 50 40

Overhead in both departments is applied as a percentage of direct labor costs. In the Mixing Department, overhead is 200 percent of direct labor. In the Tableting Department, the overhead rate is 150 percent of direct labor.

Required:

1. Prepare a production report for the Mixing Department using the FIFO method. Follow the five steps outlined in the chapter. If required, round your cost per equivalent unit answers to three decimal places and use them in subsequent computations. Round all other calculations and final answers to the nearest dollar.

Healthway
Mixing Department
Production Report for July 20XX
Unit Information
Units to account for:
Units, beginning work in process
Units started
Total units to account for
Units accounted for:
Equivalent Units
Physical Flow Direct Materials Conversion Costs
Units started and completed
Units, beginning work in process
Units, ending work in process
Total units accounted for
Cost Information
Costs to account for:
Direct Materials Conversion Costs Total
Costs in beginning work in process $ $ $
Costs added by department
Total costs to account for $ $ $
Cost per equivalent unit $ $ $
Costs accounted for:
Transferred Out Ending Work in Process Total
Goods started and completed $ $
Units, beginning work in process
Prior period
Current period
Ending work in process:
Direct materials $
Conversion costs
Total costs accounted for $ $ $

Feedback

Partially correct

2. Prepare a production report for the Tableting Department using the FIFO method. Follow the five steps outlined in the chapter. If required, round your cost per equivalent unit answers to four decimal places and use them in subsequent computations. Round all other calculations and final answers to the nearest dollar. If an amount is zero, enter "0".

Healthway
Tableting Department
Production Report for July 20XX
Unit Information
Units to account for:
Units, beginning work in process
Units started
Total units to account for
Units accounted for:
Equivalent Units
Physical Flow Transferred In Direct Materials Conversion Costs
Units started and completed
Units, beginning work in process
Units, ending work in process
Total units accounted for
Cost Information
Costs to account for:
Transferred In Direct Materials Conversion Costs Total
Costs in beginning work in process $ $ $ $
Costs added by department
Total costs to account for $ $ $ $
Cost per equivalent unit $ $ $ $
Costs accounted for:
Transferred Out Ending Work in Process Total
Goods transferred out $ $
Units, beginning work in process:
Prior period
Current period
Ending work in process:
Transferred in
Direct materials
Conversion costs
Total costs accounted for $ $ $

Solutions

Expert Solution


Related Solutions

FIFO Method, Two-Department Analysis Healthway uses a process-costing system to compute the unit costs of the...
FIFO Method, Two-Department Analysis Healthway uses a process-costing system to compute the unit costs of the minerals that it produces. It has three departments: Mixing, Tableting, and Bottling. In Mixing, at the beginning of the process all materials are added and the ingredients for the minerals are measured, sifted, and blended together. The mix is transferred out in gallon containers. The Tableting Department takes the powdered mix and places it in capsules. One gallon of powdered mix converts to 1,600...
FIFO Method, Two-Department Analysis Muskoge Company uses a process-costing system. The company manufactures a product that...
FIFO Method, Two-Department Analysis Muskoge Company uses a process-costing system. The company manufactures a product that is processed in two departments: Molding and Assembly. In the Molding Department, direct materials are added at the beginning of the process; in the Assembly Department, additional direct materials are added at the end of the process. In both departments, conversion costs are incurred uniformly throughout the process. As work is completed, it is transferred out. The following table summarizes the production activity and...
FIFO Method, Two-Department Analysis Muskoge Company uses a process-costing system. The company manufactures a product that...
FIFO Method, Two-Department Analysis Muskoge Company uses a process-costing system. The company manufactures a product that is processed in two departments: Molding and Assembly. In the Molding Department, direct materials are added at the beginning of the process; in the Assembly Department, additional direct materials are added at the end of the process. In both departments, conversion costs are incurred uniformly throughout the process. As work is completed, it is transferred out. The following table summarizes the production activity and...
Schrader Cellars uses the FIFO method in its two department process costing system: Fermenting (grape sorting...
Schrader Cellars uses the FIFO method in its two department process costing system: Fermenting (grape sorting is part of the fermentation process) and Packaging. Direct materials (grapes) are added at the beginning of the fermenting process and at the end of the packaging process (bottles). Conversion costs are added evenly throughout each process. Data from the month of december for the Fermenting Department are below: Beginning work in process inventory:             Units in beginning work in process inventory            3,000 gallons...
Eban Corporation uses the FIFO method in its process costing system. The first processing department, the...
Eban Corporation uses the FIFO method in its process costing system. The first processing department, the Welding Department, started the month with 22,200 units in its beginning work in process inventory that were 50% complete with respect to conversion costs. The conversion cost in this beginning work in process inventory was $66,200. An additional 69,000 units were started into production during the month. There were 18,800 units in the ending work in process inventory of the Welding Department that were...
A department uses the FIFO method of process costing. All direct materials are added at the...
A department uses the FIFO method of process costing. All direct materials are added at the beginning of the process. This department has the following data for this month. 181 units in beginning WIP (54% complete with respect to conversion costs). 8,874 units started 103 units in ending WIP (27% complete with respect to conversion costs). $1,898 beginning WIP direct materials costs $1,923 beginning WIP conversion costs $99,412 current month direct materials costs $98,211 current month conversion costs What is...
A department uses the FIFO method of process costing. All direct materials are added at the...
A department uses the FIFO method of process costing. All direct materials are added at the beginning of the process. This department has the following data for this month. 114 units in beginning WIP (31% complete with respect to conversion costs). 8,068 units started 198 units in ending WIP (27% complete with respect to conversion costs). $1,781 beginning WIP direct materials costs $2,377 beginning WIP conversion costs $100,870 current month direct materials costs $104,747 current month conversion costs What is...
A department uses the FIFO method of process costing. All direct materials are added at the...
A department uses the FIFO method of process costing. All direct materials are added at the beginning of the process. This department has the following data for this month. 223 units in beginning WIP (41% complete with respect to conversion costs). 9,791 units started 139 units in ending WIP (32% complete with respect to conversion costs). $1,140 beginning WIP direct materials costs $1,124 beginning WIP conversion costs $92,288 current month direct materials costs $85,721 current month conversion costs What is...
A department uses the FIFO method of process costing. All direct materials are added at the...
A department uses the FIFO method of process costing. All direct materials are added at the beginning of the process. This department has the following data for this month. 147 units in beginning WIP (74% complete with respect to conversion costs). 10,415 units started 239 units in ending WIP (61% complete with respect to conversion costs). $13 direct material cost per equivalent unit $11 conversion cost per equivalent unit What is the department's total cost of ending WIP for this...
A department uses the FIFO method of process costing. All direct materials are added at the...
A department uses the FIFO method of process costing. All direct materials are added at the beginning of the process. This department has the following data for this month. 205 units in beginning WIP (57% complete with respect to conversion costs). 9,327 units started 206 units in ending WIP (34% complete with respect to conversion costs). $13 direct material cost per equivalent unit $12 conversion cost per equivalent unit $1,748 beginning WIP direct materials costs $4,010 beginning WIP conversion costs...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT