concept of substrate partition about wastewater treatment

concept of substrate partition

about wastewater treatment

Solutions

Expert Solution

Ans. - Waste water contain gases like, Produced waters (PW) are the largest waste associated to the production of oil and gas; they contain dissolved salts, oil (dissolved and scattered organic compounds), chemicals and salt.

intolerant additives to the oil well operations, suspended particles, sand and other compounds, making their treatment very tricky. we propose the use of a two-phase partitioning bioreactor (TPPB) for the biological treatment.

Application the TPPB on the stream after classical pre-treatment stages, the reactor functioning is based on the controlled release of substrate by means of a solvent and other phase includes the larger size particles removal by the nets.

In waste water treatment , substrate refers to the organic load of waste water. it consists of carbohydrate, proteins and fats substrate partioning refers to their separtion as a combination takes more time for treatmnet, separated substrate is treated accordingly as diffrenet substrates have diffrent methods of faster tretamnet.

If you have any doubt then mention in comment.

gladiator answered 1 year ago

Next > < Previous

Related Solutions

What is wastewater treatment? what is the process of wastewater treatment? why is wastewater treatment important?...

What is wastewater treatment? what is the process of wastewater treatment? why is wastewater treatment important? No Plagiarism. Please Print essay format question

About wastewater treatment: A. Explain the primary, secondary and tertiary WWTPs (Wastewater Treatment Plants). You can...

About wastewater treatment: A. Explain the primary, secondary and tertiary WWTPs (Wastewater Treatment Plants). You can use diagrams and explain them. b. In addition to the WWTPs, mention and explain two alternatives for treating wastewater.

Describe what happens to the wastewater from our homes,and give information about the wastewater treatment plants...

Describe what happens to the wastewater from our homes,and give information about the wastewater treatment plants ( preferred if you mentioned Abu Dhabi - UAE ). What they are, what area they serve, what is the capacity, what level of treatment they provide, what do they do with the cleaned output, etc. the study should conclude with a tangible plan for wastewater management from a specific location such as school, a town, a farm, a mall and so on.

A wastewater treatment plant that treats wastewater to secondary treatment standards uses a primary sedimentation process...

A wastewater treatment plant that treats wastewater to secondary treatment standards uses a primary sedimentation process followed by an activated sludge process composed of aeration tanks and a secondary clarifiers. This problem focuses on the activated sludge process. The activated sludge process receives a flow of 15 million gallons per day (MGD). The primary sedimentation process effluent has a BOD5 concentration of 180 mgBOD5/L (this concentration is often referred as S). Before flowing into the activated sludge process, the primary...

write a research about maintenance and technical issues in running a wastewater treatment plant .

A municipal wastewater treatment plant discharges 20,000 m3/d of treated wastewater to a stream. The wastewater...

A municipal wastewater treatment plant discharges 20,000 m3/d of treated wastewater to a stream. The wastewater has a BOD5 of 30 mg/L with a k1 of 0.23 d-1. The temperature of the wastewater is 20 oC, and the dissolved oxygen is 2.0 mg/L. The stream just above the point of wastewater discharge flows at 0.65 m3/s, has a BOD5 of 5.0 mg/L, and is 90% saturated with oxygen. The temperature of the stream is also 20 oC. After mixing, the...

proposal for potable water or wastewater treatment

You are provided the following information about a municipal wastewater treatment plant. This plant uses the...

You are provided the following information about a municipal wastewater treatment plant. This plant uses the traditional activated-sludge process. Assume the microorganisms are 55 percent efficient at converting food to biomass, the organisms have a first-order death rate constant of 0.05/day, have a maximum specific growth rate of 0.1/day, and the microbes reach half of their maximum growth rate when the BOD5 concentration is 10 mg/L. There are 150,000 people in the community (their wastewater production is 225 L/day-capita, 0.1...

Your task is to build a wastewater treatment plant to handle all of the domestic wastewater...

Your task is to build a wastewater treatment plant to handle all of the domestic wastewater produced by a housing estate. Using population equivalent, PE = 65000, design, describe and calculate briefly the sizes of all the unit processes in the treatment plant that are going to be built. You may assume the value that is not given.

A municipal wastewater treatment plant is designed for COD removal and nitrification. The wastewater characteristics and...

A municipal wastewater treatment plant is designed for COD removal and nitrification. The wastewater characteristics and kinetic coefficients are described in the table below. The aeration tank DO concentration is 2.0 mg/L and MLSS concentration is 2500 mg/L. The temperature is 15C. Assume that the concentration of influent NH4-N that is nitrified accounts for 80% of influent TKN. Calculate the following parameters as a function of SRT (i.e., derive mathematical expressions of the following parameters as a function of SRT,...

Subjects