Question
In: Chemistry
1. Calculate the theoretical yield using your initial volume of 1-butanol used. 2. calculate the percent...
1. Calculate the theoretical yield using your initial volume of 1-butanol used.
2. calculate the percent yield of the product?
Mass of sodium bromide (g): 2.00 g
Volume of 1-butanol used (mL): 2.0mL
Mass of tared vial: 9.01 g
Mass of tared vial + product: 9.31 g
Mass of product 0.30 g
Solutions
queen_honey_blossom answered 2 years agoRelated Solutions
please calculate the 1.theoretical yield, 2.percent yield, and 3. overall percent yield from benzaldehyde. my products...
please calculate the
1.theoretical yield,
2.percent yield, and
3. overall percent yield from
benzaldehyde.
my products weight was 2.137 g
experiment was "Isolation of
Tetraphenylcyclopentadienone, then Recrystalization of
Tetraphenylcyclopentadienone"
HERE IS MY PROTOCOL I FOLLOWED TO GET MASS OF
2.137 g
THIS IS ALL AVAILABLE INFORMATION!!!
Add 1.5 g benzil, 1.5 g dibenzyl ketone, and 12 mL absolute
ethanol to a 50-mL round-bottom flask. Place a magnetic stir bar in
the flask. Attach a condenser, having lightly greased the joint....
a) Calculate the theoretical yield of your product. The theoretical yield should be quoted as a...
a) Calculate the theoretical yield of your product. The
theoretical yield should be quoted as a mass, not a number of
moles. Units must be shown on all numbers that need them.
Calculations that are done with an incorrect number of significant
figures will be counted as incorrect. Your work must be shown.
b) Calculate the percent yield for your product. This
calculation should be done with masses of your product and the
theoretical yield, not the number of moles....
a) Calculate the theoretical yield of your product. The theoretical yield should be quoted as a...
a) Calculate the theoretical yield of your product. The
theoretical yield should be quoted as a mass, not a number of
moles. Units must be shown on all numbers that need them.
Calculations that are done with an incorrect number of significant
figures will be counted as incorrect. Your work must be shown.
b) Calculate the percent yield for your product. This
calculation should be done with masses of your product and the
theoretical yield, not the number of moles....
Instructions: For each part...Calculate the theoretical yield and percent yield. Then calculate the overall yield. I...
Instructions: For each part...Calculate the theoretical
yield and percent yield. Then calculate the overall
yield.
I am really struggling with this and have been working on it for
awhile. Could you please show a step by step for my
understanding?
Cyclohexanol: molecular weight 100.16g/mol
Cyclohexanol: density 0.947 g/cm 3
Part A: dehydration of cyclohexanol
Amount of cyclohexanol used (g): 7.4 g
Amount of cyclohexanol obtained (g): 1.611g
Cyclohexene: molecular weight 82.14 g/mol
Cyclohexene: density 0.81 g/cm 3
Part B: Oxidative...
Calculate theoretical yield, actual yield and percent yield. Data: mass recovered: 12.1188 g. 2-methylcyclohexanol MM: 114.2...
Calculate theoretical yield, actual yield and percent
yield.
Data:
mass recovered: 12.1188 g.
2-methylcyclohexanol
MM: 114.2 g/mol
D: 0.930 g/mL
BP: 166 C
1-methylcyclohexene
MM: 96.2 g/mol
D:0.813 g/mL
BP: 110 C
What is the theoretical yield of 3,3-dimethyl-2-butanol that would be formed if you react 1.5 mL...
What is the theoretical yield of 3,3-dimethyl-2-butanol that
would be formed if you react 1.5 mL of 3,3-dimethyl-butanone with
155 mg of NaBH4?
Calculate the mass and volume of 2.00 mmol of methyl salicylate, the theoretical yield of salicylic...
Calculate the mass and volume of 2.00 mmol of methyl salicylate,
the theoretical yield of salicylic acid from that much methyl
salicylate, and the minimum volume of water needed to recrystalize
that much salicylic acid?
Determine the theoretical yield in mL when 1.5 mL of 3,3-dimethyl-2-butanol and 7 drops of H2SO4...
Determine the theoretical yield in mL when 1.5 mL of
3,3-dimethyl-2-butanol and 7 drops of H2SO4 (conc) are heated
together at 70 degrees C. The product will have a molecular weight
of 84.16 g/mol and a density of .68 g/mL.
Which statement is correct in regards to percent yield and theoretical yield? Percent yield determines the...
Which statement is correct in regards to percent yield and
theoretical yield?
Percent yield determines the maximum amount of product that can be
expected through mathematical calculations. It is set as a
proportion to the actual yield to compute the theoretical yield.
Together, they are used to determine the reactant that will limit
the reaction.
Percent yield determines the maximum amount of product that can
be expected through mathematical calculations. It is then used to
compute the theoretical yield. Calculating...
Calculate the theoretical and percent yield of terephthalic acid, based on PET being the limiting reagent....
Calculate the theoretical and percent yield of terephthalic
acid, based on PET being the limiting reagent.
MW terephthalic acid= 166.13 g/mol
MW PET= 192 g/mol
Mass of product = 0.76 g
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- For Questions 1-3: consider the following code: public class A { private int number; protected String...
- You are tasked with assessing the health department’s intervention program in preventing recurrence of acute alcohol...
- Compare the MOSFET, JFET , and BJT and identify the reasons these devices behave differently. What...
- How would you use SAS Enterprise Miner to create a neural network model of your example?
- Explain the use of neural networking modeling in predictive analytics.
- Current Market Mix of Netflix, as detail as possible, please.
- This is all one question, thank you so much in advance! You must evaluate a proposal...
ADVERTISEMENT