Q2 The pump of a LiBr--water absorption refrigeration system delivers (0.7 kg/s) of solution. The absorption...

Q2 The pump of a LiBr--water absorption refrigeration system delivers (0.7 kg/s) of
solution. The absorption system operates at the following temperatures: generator (I 10 'C);
condenser (40 'C); evaporator (lO 'C); and absorber (33 'C). Calculate;
(a) The refrigerant mass flow rate, the refrigerating capacity, and the COP of the system.
(b) The COP of an ideal heat-operated refrigeration system that operates with the same
temperatures.

Expert Solution

Give thumps up, if u like my efforts .It motivate me to do more work.

samet mamat answered 2 years ago

A pump steadily delivers 8.94 kg/s of water at the conditions given below. Calculate the pump...

A pump steadily delivers 8.94 kg/s of water at the conditions given below. Calculate the pump power (hp). The rate of heat transfer from the pump to the surroundings is Q = 1.61 kW. There are no changes in kinetic or potential energy. Pump Inlet Temperature = 50oC Pump Inlet Pressure = 1.75 MPa Pump Exit Temperature = 50oC Pump Exit Pressure = 4.17 MPa

A pump steadily delivers 9.7 kg/s of water at the conditions given below. Calculate the pump power (hp).

Thermodynamics 1. The answer is -12.31 can someone please explain how we get that. A pump steadily delivers 9.7 kg/s of water at the conditions given below. Calculate the pump power (hp). The rate of heat transfer from the pump to the surroundings is Q = 1.7 kW. There are no changes in kinetic or potential energy. Pump Inlet Temperature = 50oC Pump Inlet Pressure = 115 kPa Pump Exit Temperature = 50oC Pump Exit Pressure = 877 kPa 2....

1) A pump steadily delivers 15.9 kg/s of water at the conditions given below. Calculate the...

1) A pump steadily delivers 15.9 kg/s of water at the conditions given below. Calculate the pump power (kW). There is no heat transfer from the pump to the surroundings (i.e., adiabatic conditions). Pump Inlet Temperature = 20oC Pump Inlet Pressure = 196 kPa Pump Inlet Diameter = 10 cm Pump Inlet Elevation = 22.7 m Pump Exit Temperature = 20oC Pump Exit Pressure = 400 kPa Pump Exit Diameter = 10 cm Pump Exit Elevation = 45.4 m 2)...

A centrifugal pump delivers water at rate of 0.22 m3/s from a reservoir at a ground...

A centrifugal pump delivers water at rate of 0.22 m3/s from a reservoir at a ground level to another reservoir to height 'h' through a vertical pipe of 0.2 m diameter. Both are open to atmosphere. Power input to pump is 90 kW and it operates with 75% efficiency . f=0.004 use g=9.8 m/s2 density=1000kg/m3. Find 'h'.

A pump takes water at 60°F from a large reservoir and delivers it to the bottom...

A pump takes water at 60°F from a large reservoir and delivers it to the bottom of an open elevated tank 25 ft above the reservoir surface through a 3 inch ID pipe. The inlet to the pump is located 10 ft below the water surface, and the water level in the tank is constant at 160 ft above the reservoir surface. The pump delivers 150 gpm. If the total loss of energy due to friction in the piping system...

0.7 kg of ice at 0 ◦C and 3 kg of water at Ti are brought...

0.7 kg of ice at 0 ◦C and 3 kg of water at Ti are brought into thermal contact in an iso- lated container. All the ice melts, and the mixture reaches an equilibrium temperature of 10 ◦C. (a) (5 points) Determine the initial temperature Ti of the liquid water. (b) (1 point) Determine the entropy change ∆S_melt associated with this amount of ice melting. (c) (3 points) Determine the entropy change ∆S_coolwater associated with the decreasing temperature of the...

A pump operating at steady state receives 1.5 kg/s of liquid water at 50oC, 1.5 MPa....

A pump operating at steady state receives 1.5 kg/s of liquid water at 50oC, 1.5 MPa. The pressure of the water at the pump exit is 14 MPa. The magnitude of the work required by the pump is 25.2 kW. Stray heat transfer and changes in kinetic and potential energy are negligible. Determine the work required by a reversible pump operating with the same conditions, in kW, and the isentropic pump efficiency.

2. A pump delivers 30o C water from a supply reservoir to an elevated storage tank...

2. A pump delivers 30o C water from a supply reservoir to an elevated storage tank at a discharge rate of 120 litres/sec. At this discharge the manufacturer’s data indicates the net positive suction head (NPSH) for the pump is 6.0 m. The water surface elevation difference between the reservoir and the tank is 45.0 m. The total length of pipe between the two is 150.0 m, 10.0 m of which is located on the suction side of the pump....

Q2: Variable and Absorption costing Fagan Manufacturing uses an absorption costing system. In 2009 it manufactured...

Q2: Variable and Absorption costing Fagan Manufacturing uses an absorption costing system. In 2009 it manufactured 25,000 units and sold 20,000 units at $45 each. The company’s income statement for year ended December 31 2009 is as follows: FAGAN MANUFACTURING COMPANY INCOME STATEMENT FOR THE YEAR ENDING DECEMBER 31, 2009 Sales $900,000 Cost of goods sold: Finished goods inventory, January 1 $ 0 Cost of goods manufactured 812,500 Goods available for sale $812,500 Finished goods inventory, December 31 162,500 ...

A pump is used to circulate hot water in a home heating system. Water enters the...

A pump is used to circulate hot water in a home heating system. Water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. The inlet pressure and temperature are 14.7 lbf/in.2, and 180°F, respectively; at the exit the pressure is 90 lbf/in.2 The pump requires 1/35 hp of power input. Water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 Btu/lb · °R. Neglecting kinetic...

Question