Question

In: Physics

A C-band station has an antenna with a transponder gain of 54dB.The transmitter output power is...

A C-band station has an antenna with a transponder gain of 54dB.The
transmitter output power is set to 100 W at a frequency of 6.10 GHz.
The signal is received by a satellite at a distance of 37,500 km through
an antenna with diameter of 6m. The signal is then routed to a
transponder with a noise bandwidth of 36 MHz, and a gain of 110dB
1. Calculate the path loss.
2. Calculate power at the output port of the satellite antenna
3. Calculate the noise power at the transponder input,in dBW,in a
bandwidth of 36MHz
4. Calculate the C/N ratio,in dB, in the transponder
5. Calculate the carrier power,in dBW and in Watt at the
transponder output

Solutions

Expert Solution

Kindly go through the solution and let me know in case of any doubt or further clarification in the comment box.
Thanks for the question :)
And your upvote will be really appreciable ;)


Related Solutions

Networking: What is the EIRP for an antenna with a transmitter power of 50 dBm, a...
Networking: What is the EIRP for an antenna with a transmitter power of 50 dBm, a directivity of 27 db, and a transmission line loss of 0.5 dB? a none b 47.5 dBw c 46.5 dBw d 76.5 dBw e 77.5 dBw
An earth station transmits at 5.62 GHz from an antenna of 6 m. The transmitter generates...
An earth station transmits at 5.62 GHz from an antenna of 6 m. The transmitter generates an output of 8 kW. The satellite is 39920 km from the earth station. The efficiency of the transmitting antenna being 0.7. Calculate a. Path loss ; b. Transmitting antenna gain;. c. EIRP;. d. Received power at satellite;. e. Improvement in a received power if the satellite uses parabolic dish of 2.5 m. (3 Mark) f. Considering your calculated results in other parts of...
Is that possible, for any antenna, to be used as a receiver and transmitter? What is...
Is that possible, for any antenna, to be used as a receiver and transmitter? What is the point of that?
Design this Optimum Horn Antenna given, X-band, WR-90(waveguide), Gain = 20dBi, and F = 10GHz
Design this Optimum Horn Antenna given, X-band, WR-90(waveguide), Gain = 20dBi, and F = 10GHz
How does frequency, power band, receiver, transmitter, RSSI, sensitivity, VSWR can related to IQ modulated signals...
How does frequency, power band, receiver, transmitter, RSSI, sensitivity, VSWR can related to IQ modulated signals applying binary and target search algorithms? Please also discuss about FPGA DDR and Banks work What is an envelope in signal?
given that a 1 meter radius parabolic antenna has 55% efficiency. what is the gain for...
given that a 1 meter radius parabolic antenna has 55% efficiency. what is the gain for this antenna operating at 2 GHz?
What is the gain of a parabolic antenna with an effective aperture of 32m2 transmitting at...
What is the gain of a parabolic antenna with an effective aperture of 32m2 transmitting at 1.2GHz?
What is the gain material and its phase, typical pumping method, typical output power, and efficiency...
What is the gain material and its phase, typical pumping method, typical output power, and efficiency for laser of your choice producing tunable visible light?
A woman is listening to her radio, which is 176 m from the radio station transmitter....
A woman is listening to her radio, which is 176 m from the radio station transmitter. (a) How many wavelengths of the radio waves are there between the transmitter and radio receiver if the woman is listening to an AM radio station broadcasting at 1180 kHz? wavelengths (b) How many wavelengths are there between the transmitter and radio if she changes to an FM station broadcasting at 96.9 MHz? wavelengths
A nuclear power plant has an overall efficiency of 31% and a power output of 800MW....
A nuclear power plant has an overall efficiency of 31% and a power output of 800MW. For one year operating at full capacity, calculate a) the number of joules produced; b) the number of fission events that were required to produce those joules; c) the mass of uranium oxide (UO2) that has been used in fission; and d) the market cost of that uranium oxide if it was all high quality.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT