Consider a straight screw dislocation parallel to a rigid surface, constrained not to deform. Show that...

Consider a straight screw dislocation parallel to a rigid surface, constrained not to deform. Show that the screw is repelled from the surface by a force equivalent to an image dislocation of the same sign and magnitude. (This example is relevant to the situation of a dislocation near a surface with a hard oxide layer upon it.)

Expert Solution

genius_generous answered 2 years ago

Why is edge dislocation faster than screw dislocation?

Consider a particle which is constrained to move along the surface of the sphere of radius...

Consider a particle which is constrained to move along the surface of the sphere of radius 5, centered at the origin. (a) If we write r(t) for the motion, write down the condition ‘constrained to move along the surface of the sphere of radius 5 centered at the origin’ in terms of r(t). (Hint. For later use, try to get rid of square roots.) (b) Explain why, for such a motion, we must have r 0 (t) ⊥ r(t). (Hint....

If you are trying to loosen a stubborn screw with a straight screwdriver, you should use...

If you are trying to loosen a stubborn screw with a straight screwdriver, you should use a screwdriver with a … Group of answer choices longer handle shorter handle fatter handle thinner handle handle size does not matter

A toy airplane is flying in a straight horizontal (parallel to the ground) path with a...

A toy airplane is flying in a straight horizontal (parallel to the ground) path with a speed of vi = 34.0 m/s. Suddenly, the airplane's engines stop (at t=0). Using an x-axis that is horizontal and along the plane's original velocity and a y-axis that is vertical with positive away from the ground, the airplane now has an acceleration given by the following expressions: ax(t) = − t2/C ay(t) = − g [ 1 − vx(t)/vi ] where C =...

Two different loads are fixed in a straight line on (or parallel to) the x axis,...

Two different loads are fixed in a straight line on (or parallel to) the x axis, and they are 39.1 m apart. The charge on the extreme right is Q2 = -16.2C, and the electric field at a distance 39.1 m to the right of Q2 is zero. What will be the magnitude of the charge Q1 (the one on the far left)? Select one: -3.24 C -32.40 C 64.80 C 08.10 C 32.40 C

(a) Describe the intersection between a straight path and the surface of a sphere. The initial...

(a) Describe the intersection between a straight path and the surface of a sphere. The initial path of a fired bullet is defined by P(t) = S + tV where t ≥ 0, S = (5,1,4) and V = (-3,2,-1). A spherical ball with radius 5 is centered at the origin. (i) Calculate the intersection between the path of the bullet and the surface of the sphere. (ii) Using your answer in part (i), determine the point where the bullet...

Show that the set of rigid motions E(3) forms a group.

1) Suppose you have a closed rigid container of air at 20 Celsius on the surface...

1) Suppose you have a closed rigid container of air at 20 Celsius on the surface of the Earth. We change the temperature of the container to 72 Celsius, leaving it closed, and read a pressure gauge attached to the container. Initially the reading was 101 KPa (kilopascals, or 1000 N/m2). What is the new reading? Give your answer in KPa. 2) Match these sounds with the sound energy in dB (decibels). - A. ...

An iron plate 0.2m thick is magnetized to saturation in a direction parallel to the surface...

An iron plate 0.2m thick is magnetized to saturation in a direction parallel to the surface of the plate . A 10 GeV muon moving perpendicular to that surface enters the plate and passes through it with relatively little loss of energy. Calculate approximately the angular deﬂection of themuon’strajectory, given that the rest-massenergy of the muon is 200 MeV and that the saturation magnetization in iron is equivalent to 1.5·10^29 electron moment spercubicmeter.

A sled with mass 100 kg moves in a straight line on a horizontal surface as...

A sled with mass 100 kg moves in a straight line on a horizontal surface as it is being pulled by a force 250 N at an angle of 35° with the direction of motion. A force of friction of 30 N acts on the sled. At one point in its path, its speed is 3.0 m/s; after it has traveled a distance d beyond this point, its speed is 8.0 m/s. Use the work-energy theorem to find the total...

Question