Consider a log splitter with a load capacity of 15 ton which is run by a...

Consider a log splitter with a load capacity of 15 ton which is run by a 10 GPM hydraulic pump. The bore and rod diameter of the log splitter cylinder are 4 in. and 2 in., respectively, whereas the stroke length is 24 in. Determine the following:

a) Maximum pressure generated in the extension stroke

b)Extension velocity of the cylinder

c)Power (HP) generated in the extension stroke when pushing the maximum load

d) Retraction velocity of the cylinder

e) Power (HP) generated in retraction stroke when pulling the maximum load

f) % increase in velocity of the piston during retraction compared to extension

g) Cycle time of the cylinder (Hint: Cycle time = Extension time + Retraction time)

Expert Solution

genius_generous answered 2 years ago

A truck will haul an average load of 15 cy, heaped capacity, and loose measure per...

A truck will haul an average load of 15 cy, heaped capacity, and loose measure per load. Use average values of swell factors in Table 7.3 on p. 131 of your textbook to determine the volume of the truck in bank measure when the material is sand, ordinary earth, dense clay, and well-blasted rock. Then, using an Excel spreadsheet, determine the number of trucks required to move material in the following scenario: A project requires 40,000 cy of compacted fill...

A refrigerator with a cooling capacity of 5 ton uses ammonia as the working fluid. The...

A refrigerator with a cooling capacity of 5 ton uses ammonia as the working fluid. The condenser and evaporator maintain a pressure of 1500 kPa and 200 kPa respectively. The compressor has an isentropic efficiency of 80%. If the vapor leaving the evaporator is superheated by 5°C and the liquid leaving the condenser is supercooled by 5°C, determine: a) The power input to the compressor b) The mass flow rate of ammonia c) The COP of the refrigerator

Design a sulfuric acid plant with a capacity of 8 ton per day. The product is...

Design a sulfuric acid plant with a capacity of 8 ton per day. The product is to have a purity of 96% acid. Label all streams

4. Consider the model for demand for housing: Log Q = β0 + β1 log P...

4. Consider the model for demand for housing: Log Q = β0 + β1 log P + β2 log Y + u Where Q = measure of quantity of housing consumed by each of 3, 120 families per year P = price of unit of housing in family's locality Y = measure of family income The estimated model, (with standard errors in parentheses) is: Log Q = 4.17 - 0.247 log P + 0.96 log Y R2 = .371 (0.11)...

A company owns a refrigeration system whose refrigeration capacity is 200 tons (1 ton of refrigeration...

A company owns a refrigeration system whose refrigeration capacity is 200 tons (1 ton of refrigeration = 211 kJ/min), and you are to design a forced-air cooling system for fruits whose diameters do not exceed 7 cm under the following conditions: The fruits are to be cooled from 28°C to an average temperature of 8°C. The air temperature is to remain above -2°C and below 10°C at all times, and the velocity of air approaching the fruits must remain under...

In order to determine the load capacity of a lift, a random sample of 15lifts are...

In order to determine the load capacity of a lift, a random sample of 15lifts are stress tested and the maximum weight that each life can bear before malfunctioning is recordedas the “Maximum Load”. Suppose thatthe mean of the maximum load is1279 pounds and the standard deviation of the maximum loadis 123 pounds. a.Verify that the conditions for constructing confidence intervals for the mean are met. b.Compute and interpret a 99% confidence interval for the mean of the maximum weight...

What is the load capacity of a beam in bending and define the internal bending moment...

What is the load capacity of a beam in bending and define the internal bending moment from which this capacity depends. (draw e sketch to illustrate this relationship)

Consider the following scenario. Suppose that the free-trade price of a ton of steel is €500....

Consider the following scenario. Suppose that the free-trade price of a ton of steel is €500. Finland, a small country, imposes a €60-per-ton specific tariff on imported steel. With the tariff, Finland produces 300,000 tons of steel and consumes 600,000 tons of steel. As compared with free trade, steel production has risen by ½ while steel consumption fallen by 1/7. (1) Draw a picture of Finland’s domestic market to illustrate this scenario. Please label all prices and quantities under free-trade...

Consider the market for a natural? resource, where the price is initially ?$12,000 per ton and...

Consider the market for a natural? resource, where the price is initially ?$12,000 per ton and 12,000 thousand tons are supplied. Suppose the price of the resource falls to ?$11,000 per? ton, at which price the market supplies 11,000 thousand tons. What is the price elasticity of supply between these? prices? Using the midpoint? formula, the price elasticity of supply is _______(Enter your response as a real number rounded to two decimal? places.)

Consider the following bond which pays coupon semiannually on October 15 and April 15. It is...

Consider the following bond which pays coupon semiannually on October 15 and April 15. It is being sold for settlement on August 10, 2020. Coupon rate 8% Yield to maturity 6% Maturity date April 15, 2024 Settlement date August 10, 2020 Day count convention 30/360 Par $1000 Calculate its flat price, accrued interest, and full price.

Question