A parallel plate capacitor is composed of two parallel plates of aluminium foil, each with a...

A parallel plate capacitor is composed of two parallel plates of aluminium foil, each with a surface area of 2.5 m2 that are separated by 2.0 mm The foils are then oppositely charged with 5 mC of charge.

a) what is the electric field between and outside of the capacitor near its middle ?

b) If a dust particle (m = 0.5 ng) picks up 10,000 electrons and finds itself right near the negatively charge plate, what is its KE (in J and eV) after it moves to the positive plate?

c) how long does it take the dust particle to get to the positive plate ?

d) what will its speed be when it gets to the positive plate ?

Expert Solution

The answers are

genius_generous answered 2 years ago

A parallel-plate capacitor with plate separation of 1.0 cm has square plates, each with an area...

A parallel-plate capacitor with plate separation of 1.0 cm has square plates, each with an area of 6.0 × 10 -2 m 2. What is the capacitance of this capacitor if a dielectric material with a dielectric constant of 2.4 is placed between the plates, completely filling them? ( ε 0 = 8.85 × 10 -12 C 2/N ∙ m 2) A)1.3 × 10-12 F B)1.3 × 10-10 F C)64 × 10-14 F D)15 × 10-12 F E)15 × 10-14...

A parallel-plate capacitor is made from two aluminum foil sheets, each 5.4 cm long and 4.9...

A parallel-plate capacitor is made from two aluminum foil sheets, each 5.4 cm long and 4.9 cm wide. The two sheets are separated by a distance of 0.024 mm. 1) What is the capacitance of this capacitor? C = μF 2) If a potential difference of 2 volts is applied across the two plates of this capacitor, what is the absolute value of the charge on the plate with the higher voltage? qhigher = μC 3) What is the absolute...

A parallel plate capacitor consisting of square plates is charged. One edge of the plates is...

A parallel plate capacitor consisting of square plates is charged. One edge of the plates is 0.4 (m). When the current is 5 (A), the rate of change of the electric field between the plates is approximately how many V / (m.s). Eo = 8.85x10-12 (SI)

A parallel-plate capacitor is made from two plates 15.0 cm on each side and 4.65 mm...

A parallel-plate capacitor is made from two plates 15.0 cm on each side and 4.65 mm apart. Half of the space between these plates contains only air, but the other half is filled with Plexiglas of dielectric constant 3.25. An 19.5 V battery is connected across the plates. 1. What is the capacitance of this combination? C=____F 2. How much energy is stored in the capacitor? U=____J 3. If we remove the Plexiglas, but change nothing else, how much energy...

The plates of an air-filled parallel-plate capacitor with a plate area of 15.0 cm2 and a...

The plates of an air-filled parallel-plate capacitor with a plate area of 15.0 cm2 and a separation of 8.95 mm are charged to a 170-V potential difference. After the plates are disconnected from the source, a porcelain dielectric with κ = 6.5 is inserted between the plates of the capacitor. (a) What is the charge on the capacitor before and after the dielectric is inserted? Qi = C Qf = C (b) What is the capacitance of the capacitor after...

Two 2.50 cm × 2.50 cm plates that form a parallel-plate capacitor are charged to ±...

Two 2.50 cm × 2.50 cm plates that form a parallel-plate capacitor are charged to ± 0.708 nC . Part A What is the electric field strength inside the capacitor if the spacing between the plates is 1.50 mm ? Part C What is the electric field strength inside the capacitor if the spacing between the plates is 3.00 mm ?

A physicist builds a parallel-plate capacitor with adjustable spacing between the plates. When the plates are...

A physicist builds a parallel-plate capacitor with adjustable spacing between the plates. When the plates are at their initial separation, the capacitance is 7.00 µF. (a) At this capacitance, the capacitor is connected to a 18.00 V battery. After fully charging, how much energy (in µJ) is stored in the capacitor? (b) The battery is then disconnected. Without discharging the capacitor, the physicist then doubles the separation between the plates. At this point, how much energy (in µJ) is stored...

A plane parallel-plate capacitor consists of two identical circular metal plates, each of radius 2.50 cm....

A plane parallel-plate capacitor consists of two identical circular metal plates, each of radius 2.50 cm. the plates separated by 1.00 micrometer. The charge on the capacitor is 3.50 nC. Values of standard constant can be found in your notes or the textbook. For these questions, enter only the numerical values. Do not enter the units, which are already given after the blank. Note that the data is given to 3 significant figures. You MUST enter your answers also to...

Problem 2 – The plates of a parallel-plate capacitor are separated by a distance d =...

Problem 2 – The plates of a parallel-plate capacitor are separated by a distance d = 0.2 m. There is vacuum between the plates. The voltage difference between the plates is 150 V. The capacitance of the plates is 3 μF. a) (6 pts) Find the magnitude of the electric field between the plates (ignoring edge effects). b) (12 pts) An alpha particle, which is doubly ionized helium, He2+ (charge = 2e where e is the elementary charge, mass =...

A parallel plate air capacitor with no dielectric between the plates is connected to a constant...

A parallel plate air capacitor with no dielectric between the plates is connected to a constant voltage source. How would the capacitance and the charge change if a dielectric of dielectric constant K=2 is inserted between the plates. C0 and Q0 are the capacitance and charge of the capacitor before the introduction of the dielectric.

Question