Hydrogen sulfide is removed from natural gas through a “sweetening process” as it is toxic and...

Hydrogen sulfide is removed from natural gas through a “sweetening process” as it is toxic and its combustion produces corrosive substances. A proposed process is given below:

2H₂S_(g) + SO_2(g) --> 3S(s) + 2H₂O_(g)

In a test process, a gas stream which contains 20.0% H₂S and 80.0% CH₄ was combined with a stream of pure SO₂ prior to entering the reactor. The process produced 5000 lb of solid S, and in the product gas, the ratio of SO₂ to H₂S was equal to 3.00, and the ratio of H₂O to H₂S was 10.0. Draw the diagram. Using the extent of reaction balance, determine the following:

a.) limiting reactant (LR)

b.) fractional conversion of the LR

c.) Feed rates of the two input streams

Expert Solution

Amanda K answered 3 months ago

Hydrogen sulfide gas is an extremely toxic (and smelly) gas that can form from anaerobic digestion...

Hydrogen sulfide gas is an extremely toxic (and smelly) gas that can form from anaerobic digestion (e.g. in sewer pipes). The ΔGf° of H2S (g) and H2S (aq) are -33.4 kJ/mol and -27.87 kJ/mol, respectively so that KH = 9.32 atm/(mole/L) at 25 C. At concentrations above 0.01 ppm in the air, the rotten egg smell is first noticeable. At concentrations above 2 ppm, the gas becomes toxic. Calculate the pH of water in equilibrium with H2S at 0.01 ppm...

The decomposition of solid ammonium hydrogen sulfide to form ammonia gas and hydrogen sulfide gas is...

The decomposition of solid ammonium hydrogen sulfide to form ammonia gas and hydrogen sulfide gas is an endothermic process.A 6.1589-g sample of the solid is placed in an evacuated 4.000-L vessel at 24.00C.After equilibrium is established, the total pressure inside the vessel is 0.709 bar and some of the solid remains in the vessel. a.Calculate KP for the reaction. b.Calculate the percent of the solid that has decomposed. c.If the system was at equilibrium and the volume of the container...

The hydrogen sulfide in a 82.868 g sample of crude petroleum was removed by distillation and...

The hydrogen sulfide in a 82.868 g sample of crude petroleum was removed by distillation and collected in a solution of CdCl2. The precipitated CdS was then filtered, washed and ignited to create CdSO4. Calculate the percentage of H2S in the sample if 0.192 grams of CdSO4 was formed.

CO2 is removed from the body through the lungs in a process that is mediated by...

CO2 is removed from the body through the lungs in a process that is mediated by red blood cells, as summarized in the figure below. Transport of CO2 is coupled to the transport of O2 through hemoglobin. -To what extent does the intracellular pH or the red blood cell vary during its movement from the tissues to the lungs and back, and why is this so? -In what form, and where is the CO2 during its movement from the tissues...

aluminum sulfide and water react to form aluminum hydroxide and hydrogen sulfide gas. suppose 128.00 g...

aluminum sulfide and water react to form aluminum hydroxide and hydrogen sulfide gas. suppose 128.00 g of aluminum are added to 154.45 mL of water(d=1.00 g/ml). Answer the following questions. a).before the reaction, how many water molecules are present in the reaction mixture? b) when the reaction is finished. what mass, in g, of aluminum hydroxide can theoretically be produced? c) limiting reactant? d) mass in grams of remaining excessreactant if the theoretical yield of aluminum hydroxide is obtained? e)if...

Hydrogen cyanide gas (HCN), a powerful respiratory inhibitor, is highly toxic. It is a very weak...

Hydrogen cyanide gas (HCN), a powerful respiratory inhibitor, is highly toxic. It is a very weak acid (Ka = 6.2 x 10-10) when dissolved in water. If a 50.0 ml sample of 0.100 M HCN is titrated with 0.100 M NaOH, calculate the pH of the solution After 8.00 mL of 0.100 M NaOH has been added At the halfway point of the titration At the equivalence point of the titration

Hydrogen sulfide gas H2S, burns in oxygen to give sulfure dioxide, SO2, and water. Write the...

Hydrogen sulfide gas H2S, burns in oxygen to give sulfure dioxide, SO2, and water. Write the equation for the reaction, giving molecular, molar, and mas interpreations below the equation.

2H2S (g) = 2H2 (g) + S2 (g) When heated hydrogen sulfide gas decomposes according to...

2H2S (g) = 2H2 (g) + S2 (g) When heated hydrogen sulfide gas decomposes according to the equation above. A 3.40g smple of H2S(g) is introduced into an evacuated rigid 1.25 L container. The sealed container is heated to 483 K, and 3.72 x10-2 mol of S2 (g) is present at equilibrium. a) Write the expression for the equilibrium constant, Kc for the decomposition reaction represented above. b) Calculate the equilibrium concentration in M of H2 (g) and H2S (g)...

Hydrogen gas for fuel can be made through the catalyzed reaction of methane gas and steam....

Hydrogen gas for fuel can be made through the catalyzed reaction of methane gas and steam. Calculate the minimum temperature required for this reaction to achieve an equilibrium constant of unity (K = 1) using only the following information: A) ∆H˚rxn - can be calculated from bond energy (bond enthalpy) values as given in the following table of data: Bond Bond Energy (kJ mol-1) H-H 436 H-C 414 H-O 464 C=O 799 B) ∆S˚rxn for this reaction can be calculated...

An exhaust stream contains 1250 ppm of a toxic impurity that is to be removed by...

An exhaust stream contains 1250 ppm of a toxic impurity that is to be removed by adsorption into a clean liquid; the absorber vent must contain no more than 15 ppm of the impurity. The Henry’s law constant is 0.5. a. If the gas rate is 7.40 kmol/h, how many theoretical stages are required, and what liquid rate is required, if the absorber operates at 1.35 times the minimum liquid rate? b. If the gas rate increases to 8.10 kmol/h...

Question