Question

In: Computer Science

Radio Link Loss Radio link loss is a key factor in the design of any radio...

Radio Link Loss

Radio link loss is a key factor in the design of any radio communications system or wireless communication system.

The radio link loss is a signal loss that essentially reduces the power density of an electromagnetic wave or signal. Since the signal propagates through the environment in which it is traveling., All radio communication, broadcast, and wireless communication systems are affected by this.

Different reasons for the radio link loss

1. Free space loss:  Free space loss occurs when the signal travels through space without any other effects attenuating the signal. It will still diminish as it spreads out. As the signal has to cover a wider area, conservation of energy tells us that the energy in any given area will reduce as the area covered becomes larger.

2. Diffraction:  Radio link loss occurs when an object/obstacle appears in the path. The signal can diffract around the object, but losses occur. The loss is higher, the more rounded the object.

  1. Multipath:  In a real terrestrial environment, signals will be reflected, and they will reach the receiver via several different links/paths. These signals may add or subtract from each other depending upon the relative phases of the signals. If the receiver is moved, the scenario will change, and the overall received signal will be found to vary with position.

4. Absorption losses:  Absorption losses occur if the radio links pass into a medium that is not transparent to radio signals.

For, e.g., Buildings, walls, etc., Atmospheric moisture, i.e., moisture in the air, Vegetation, i.e., in dense forest trees and foliage, can attenuate radio signals, particularly when wet.

  1. Terrain (land):  The terrain over which signals travel will significantly affect the signal. Hills which obstruct the path will considerably attenuate the signal, often making reception impossible
  2. Atmosphere:  The atmosphere can affect radio links paths.

How can we reduce loss?

  1. Radio link loss cab is reduced by Predicting radio link loss.

2. Understanding the various elements affecting radio link loss is to be able to predict the loss for a given link.

  Most radio link loss predictions are made using the following techniques.

· Statistical methods:  Statistical methods of predicting signal path loss rely on measured and averaged losses for typical types of radio links. The figures are entered into the prediction model, which can calculate the figures based on the data. This type of approach is normally used for planning cellular networks, broadcast networks.

· Deterministic approach:  This approach to radio link loss and coverage prediction to be used for short-range links where the amount of required data falls within acceptable limits.

Radio Link Loss

Radio link loss is a key factor in the design of any radio communications system or wireless communication system.

The radio link loss is a signal loss that essentially reduces the power density of an electromagnetic wave or signal. Since the signal propagates through the environment in which it is traveling., All radio communication, broadcast, and wireless communication systems are affected by this.

Different reasons for the radio link loss

1. Free space loss:  Free space loss occurs when the signal travels through space without any other effects attenuating the signal. It will still diminish as it spreads out. As the signal has to cover a wider area, conservation of energy tells us that the energy in any given area will reduce as the area covered becomes larger.

2. Diffraction:  Radio link loss occurs when an object/obstacle appears in the path. The signal can diffract around the object, but losses occur. The loss is higher, the more rounded the object.

  1. Multipath:  In a real terrestrial environment, signals will be reflected, and they will reach the receiver via several different links/paths. These signals may add or subtract from each other depending upon the relative phases of the signals. If the receiver is moved, the scenario will change, and the overall received signal will be found to vary with position.

4. Absorption losses:  Absorption losses occur if the radio links pass into a medium that is not transparent to radio signals.

For, e.g., Buildings, walls, etc., Atmospheric moisture, i.e., moisture in the air, Vegetation, i.e., in dense forest trees and foliage, can attenuate radio signals, particularly when wet.

  1. Terrain (land):  The terrain over which signals travel will significantly affect the signal. Hills which obstruct the path will considerably attenuate the signal, often making reception impossible
  2. Atmosphere:  The atmosphere can affect radio links paths.

How can we reduce loss?

  1. Radio link loss cab is reduced by Predicting radio link loss.

2. Understanding the various elements affecting radio link loss is to be able to predict the loss for a given link.

  Most radio link loss predictions are made using the following techniques.

· Statistical methods:  Statistical methods of predicting signal path loss rely on measured and averaged losses for typical types of radio links. The figures are entered into the prediction model, which can calculate the figures based on the data. This type of approach is normally used for planning cellular networks, broadcast networks.

· Deterministic approach:  This approach to radio link loss and coverage prediction to be used for short-range links where the amount of required data falls within acceptable limits.

Please rewrite it in your own words (I mean paraphrase)

Solutions

Expert Solution

Radio Link Loss

Radio link loss may be a key think about the planning of any radio communications system or wireless communication system.

The link loss may be a signal loss that essentially reduces the facility density of an electromagnetic radiation or signal. Since the signal propagates through the environment during which it's traveling., All radio communication, broadcast, and wireless communication systems are suffering from this.

Different reasons for the link loss

1. Free space loss: Free space loss occurs when the signal travels through space with none other effects attenuating the signal. it'll still diminish because it spreads out. because the signal has got to cover a wider area, conservation of energy tells us that the energy in any given area will reduce because the area covered becomes larger.

2. Diffraction: link loss occurs when an object/obstacle appears within the path. The signal can diffract round the object, but losses occur. The loss is higher, the more rounded the thing .

Multipath: during a real terrestrial environment, signals are going to be reflected, and that they will reach the receiver via several different links/paths. These signals may add or subtract from one another depending upon the relative phases of the signals. If the receiver is moved, the scenario will change, and therefore the overall received signal are going to be found to vary with position.
4. Absorption losses: Absorption losses occur if the radio links pass into a medium that's not transparent to radio signals.

For, e.g., Buildings, walls, etc., Atmospheric moisture, i.e., moisture within the air, Vegetation, i.e., in dense forest trees and foliage, can attenuate radio signals, particularly when wet.

Terrain (land): The terrain over which signals travel will significantly affect the signal. Hills which obstruct the trail will considerably attenuate the signal, often making reception impossible
Atmosphere: The atmosphere can affect radio links paths.
How can we reduce loss?

Radio link loss cab is reduced by Predicting link loss.
2. Understanding the varied elements affecting link loss is to be ready to predict the loss for a given link.

Most link loss predictions are made using the subsequent techniques.

· Statistical methods: Statistical methods of imagining signal path loss believe measured and standard losses for typical kinds of radio links. The figures are inserted into the prediction model, which can calculate the figures supported the data . this type of approach is usually used for planning cellular networks, broadcast networks.

· Deterministic approach: This approach to link loss and coverage prediction to be used for short-range links where the quantity of required data falls within acceptable limits.

## All the above content is 100% unique. Feel free to ask any queries,If you liked it please give a thumbs up.##


Related Solutions

Q1 . Design the rectangular key . Determine the shaft strength factor if the length of...
Q1 . Design the rectangular key . Determine the shaft strength factor if the length of the key should not exceed 12 cm . used if need power 1kw velocity 500rpm ultimate stress 680Mpa yield stress 400Mpa shaft diameter50mm   tension=compression
32. Evidence in fraud investigation establishes any key elements of a crime, link a suspect with...
32. Evidence in fraud investigation establishes any key elements of a crime, link a suspect with a crime scene or a victim, establish the identity of a victim or suspect, corroborate verbal witness testimony, exonerate the innocent or otherwise, and give detectives leads to work with in the case Required a) Define and explain evidence in fraud investigation b) Describe the qualities of investigative evidence
: Design and implement class Radio to represent a radio object. The class defines the following...
: Design and implement class Radio to represent a radio object. The class defines the following attributes (variables) and methods: Assume that the station and volume settings range from 1 to 10. A private variable of type int named station to represent a station number. Set to A private variable of type int named volume to represent the volume setting. Set to 1. A private variable of type boolean named on to represent the radio on or off. Set to...
In any design of hydraulic structures, a safety factor should be included. Describe what a safety...
In any design of hydraulic structures, a safety factor should be included. Describe what a safety factor is and why it is crucial in the design. This question is open-ended. Therefore it must be supported by relevant literature.
What is Axiomatic Design? Steps and Application of Axiomatic Design Example of Axiomatic Design Link Axiomatic...
What is Axiomatic Design? Steps and Application of Axiomatic Design Example of Axiomatic Design Link Axiomatic Design to your own experience and real business story to use the tool.
What are some of the key theories that link accounting with the notion of efficient markets?...
What are some of the key theories that link accounting with the notion of efficient markets? What do these theories find and what are the assumptions that underpin their methods? (1,000words essay question)
One of the key tenets of the health and development link is that good health promotes...
One of the key tenets of the health and development link is that good health promotes economic development at the societal level, which is critical for national development. In 2015, the leading cause of death globally was ischemic heart disease. What effect do you think this had on low-, middle-, and high-income countries?
Please solve as soon as possible The cement and concrete industry is a key link in...
Please solve as soon as possible The cement and concrete industry is a key link in the circular economy. Alternative fuels/raw materials in cement kilns, utilising recycled aggregates and cementitious industrial by-products in concrete and producing durable concrete structures assist in the circular economy. Example of fly ash production is shown in Figure 1. Discuss the use of any THREE new binders, waste materials and recycled materials (as ingredients) in concrete production and their suitable applications. Produce a ‘white paper’...
explain any two factor that affect ped
explain any two factor that affect ped
Design an ER Diagram for the given problem. Link the tables that are related and implement...
Design an ER Diagram for the given problem. Link the tables that are related and implement your design using MySQL. Insert at least a minimum of 5 records. Ensure that the data to be added are related to other tables. Post here the screenshot of the following: Entity Relationship Diagram with attributes, PK, and FK. Use the "describe" command to view the structure of the tables. Use the "select" command to view the contents of the tables. Company ABC has...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT