Question

In: Mechanical Engineering

A rigid sealed tank of contains 0.5 kg R-410a at 0 oC with specific volume 0.01...

A rigid sealed tank of contains 0.5 kg R-410a at 0 oC with specific volume 0.01 m3/kg. The pure substance R-410a is now heated to a room temperature of 25 oC. Find the following:

a. The volume of R-410a in the tank is?
b. The final pressure of R-410a in the tank is?
c. The process heat transfer rate is?

Solutions

Expert Solution

samet mamat answered 23 hours ago
Next > < Previous

Related Solutions

A rigid sealed tank contains 0.5 kg R-410a at 0oC with specific volume 0.01m3/kg. The pure...
A rigid sealed tank contains 0.5 kg R-410a at 0oC with specific volume 0.01m3/kg. The pure substance R-410a is now heated to a room temperature of 25oC. a. Find the volume of R-410a in the tank.              [2] b. Find the final pressure R-410a in the tank          [2] c. Find the process heat transfer.
An insulated, rigid tank whose volume is 0.5 m3 is connected by a valve to a...
An insulated, rigid tank whose volume is 0.5 m3 is connected by a valve to a large vessel holding steam at 40 bar, 480°C. The tank is initially evacuated. The valve is opened only as long as required to fill the tank with steam to a pressure of 20 bar. Determine: (a) the final temperature of the steam in the tank, in °C, the final mass of the steam in the tank, in kg, and (b) the amount of entropy...
A rigid tank contains hydrogen and has a volume of 4.1 ft3. It is initially at...
A rigid tank contains hydrogen and has a volume of 4.1 ft3. It is initially at 87°F and 1,072 psia. Hydrogen then leaks from the tank until it is 76°F and 158 psia. How much heat transfer occurred into the tank, in Btu. Answer negative if heat left the tank.
A tank contains 2140 L of pure water. A solution that contains 0.01 kg of sugar...
A tank contains 2140 L of pure water. A solution that contains 0.01 kg of sugar per liter enters a tank at the rate 6 L/min. The solution is mixed and drains from the tank at the same rate. (a) How much sugar is in the tank initially? (b) Find the amount of sugar in the tank after t minutes. (c) Find the concentration of sugar (kg/L) in the solution in the tank after 51 minutes.
A rigid tank with a volume of 20 litres initially contains water at 0.1 degree of...
A rigid tank with a volume of 20 litres initially contains water at 0.1 degree of dryness and a pressure of 175 KPA. A steam disposal Valve is located at the top of the tank. Adding heat and steam by throwing the final case degree of dryness 0.4 and pressure 150 kPa is desired to be made. How much mass is ejected and what is the entropy produced. Heat source temperature 1000 K.
A rigid and closed steel tank with a volume of 86 dm 3   contains a mixture...
A rigid and closed steel tank with a volume of 86 dm 3   contains a mixture of saturated vapor and liquid at a quality and pressure of 0.9 and 20 bar respectively. Heat is removed from the system until it reaches 147 ° C. What is the volume of the saturated liquid phase at the end state?
A rigid tank of volume 0.63 m3 initially has some air inside at 0.5 bar and...
A rigid tank of volume 0.63 m3 initially has some air inside at 0.5 bar and 300 K. A hole develops in the wall, and air from the surroundings at 1 bar, 300 K flows in until the pressure in the tank reaches 1 bar. Heat transfer between the contents of the tank and the surroundings is negligible. Determine the final temperature in the tank, in K. What is the entropy generation of the process? (Please treat the air as...
A rigid tank of volume 0.63 m3 initially has some air inside at 0.5 bar and...
A rigid tank of volume 0.63 m3 initially has some air inside at 0.5 bar and 300 K. A hole develops in the wall, and air from the surroundings at 1 bar, 300 K flows in until the pressure in the tank reaches 1 bar. Heat transfer between the contents of the tank and the surroundings is negligible. Determine the final temperature in the tank, in K. What is the entropy generation of the process? (Please treat the air as...
A rigid tank of volume 0.63 m3 initially has some air inside at 0.5 bar and...
A rigid tank of volume 0.63 m3 initially has some air inside at 0.5 bar and 300 K. A hole develops in the wall, and air from the surroundings at 1 bar, 300 K flows in until the pressure in the tank reaches 1 bar. Heat transfer between the contents of the tank and the surroundings is negligible. The final temperature is 350 K. Use the transient state entropy balcance to find the entropy generation of the process
A rigid tank contains a saturated liquid-vapour mixture of water in an equilibrium state. The volume...
A rigid tank contains a saturated liquid-vapour mixture of water in an equilibrium state. The volume of the tank is 110 m3 and the temperature of the water in the tank is 115°C. In the tank, 70% of the mass is liquid and 30% of the mass is vapour. Please calculate the total mass of water in the tank.
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT