A storage tank at STP contains 21.6 kgkg of nitrogen (N2)(N2). a. What is the volume...

A storage tank at STP contains 21.6 kgkg of nitrogen (N2)(N2).

a. What is the volume of the tank?

b.What is the pressure if an additional 32.7 kgkg of nitrogen is added without changing the temperature?

Solutions

Expert Solution

a) Volume the tank can be find using below formula

b) pressure can be find using below formula

Since T,V,R constants in this case

. Pressure,

genius_generous answered 1 year ago

Next > < Previous

Related Solutions

For storage options a, b, and c, what volume of storage tank for hydrogen would be...

For storage options a, b, and c, what volume of storage tank for hydrogen would be needed for a hydrogen fuel cell car to have the same delivered transport energy (that is, total vehicle-km of travel) as a conventional car with a full 50 litre petrol tank (note that the actual volume of the tank is more than 50 litre). a- If the hydrogen is stored as compressed gas at a pressure of 350 bar (1 bar = 101 kPa)...

A gaseous mixture of O2 and N2 contains 40.8 % nitrogen by mass. What is the...

A gaseous mixture of O2 and N2 contains 40.8 % nitrogen by mass. What is the partial pressure of oxygen in the mixture if the total pressure is 385 mmHg ? Express you answer numerically in millimeters of mercury.

A tank contains methane at 1000psia and 140F. Another tank of equal volume contains ethane at...

A tank contains methane at 1000psia and 140F. Another tank of equal volume contains ethane at 500psia and 140F. The two tanks are connected, the gases are allowed to mix and the temperature is restored to 140F. Calculate the final pressure, the composition of the mixture, and the partial pressures of the components at final conditions. Do not assume that ideal gas equations apply. Z-factor for methane is 0.95, and ethane is 0.77

A natural gas storage tank is a cylinder with a moveable top. The volume of the...

A natural gas storage tank is a cylinder with a moveable top. The volume of the cylinder can change only as its height changes. Its radius remains fixed. The height of the cylinder is 22.3 m on a day when the temperature is 23 ∘C. The next day the height of the cylinder increases to 23.6 m as the gas expands because of a heat wave. Find the temperature, assuming that the pressure and amount of gas in the storage...

A spherical storage tank contains oil. The tank has a diameter of 6 feet. You are...

A spherical storage tank contains oil. The tank has a diameter of 6 feet. You are asked to calculate the height at which an 8-foot-long dipstick would be wet with oil when immersed in the tank when it contains 6 ft3 of oil. The equation giving the height h of the liquid in the spherical tank for the given volume and radius is given by: f(h) = h3−9h2 + 3.8197 Use the secant method to find roots of equations to...

what is storage tank stratification?

A sample of nitrogen (N2) has a volume of 41.0 L at a pressure of 770....

A sample of nitrogen (N2) has a volume of 41.0 L at a pressure of 770. mmHg . What is the final volume, in liters, of the gas at each of the following pressures, if there is no change in temperature and amount of gas? Part A 711 mmHg Express your answer using three significant figures. Part B 3.0 atm Express your answer using two significant figures. Part C 0.390 atm Express your answer using three significant figures. Part D...

A cylinder of volume 0.240 m3 contains 10.1 mol of neon gas at 21.6°C. Assume neon...

A cylinder of volume 0.240 m3 contains 10.1 mol of neon gas at 21.6°C. Assume neon behaves as an ideal gas (g) Compute ΔU − W. (i) Compute Q, the thermal energy transfer.

A cylinder fitted with a piston has an initial volume of 0.1 m3 and contains nitrogen...

A cylinder fitted with a piston has an initial volume of 0.1 m3 and contains nitrogen at 150 kPa, 25 0C. The piston is moved, compressing the nitrogen until the pressure is 1 MPa and the temperature is 150 0C. During this compression process heat is transferred from the nitrogen, and the work done on the nitrogen is 20 kJ. Determine the amount of this heat transfer.

Part A. You have 0.03720 mol of N2 gas at STP. What is its density? This...

Part A. You have 0.03720 mol of N2 gas at STP. What is its density? This is supposedly a trick question...please show your logic/reasoning so I can understand the problem. Thank you. Part B.10.00 mL of sulfuric acid (H2SO4) is diluted to 100.00 mL. The diluted solution is titrated with 6.00 M KOH. The equivalence point is reached after the addition of 67.02 mL KOH. What is the concentration of the undilated solution?

Subjects