Question

In: Mechanical Engineering

Two equal gear wheel of 360 mm p.c.d and 6 module are in mesh if the...

Two equal gear wheel of 360 mm p.c.d and 6 module are in mesh if the pressure angle 20 determine the maximum addendum necessary if there are always to be at least two pairs of teeth in contact . if the gear wheels rorates at 110 r.p.m and 6 kw is being transmetted find the normal force between the teeth assuming that the total force is dividing equally between the two pairs of teeth Neglect the frection. (Ans 6.8mm , 1.54KN .)

Solutions

Expert Solution


Related Solutions

What is diametral pitch, and why is it an important parameter in a gear mesh?
What is diametral pitch, and why is it an important parameter in a gear mesh?
An external gear has a module of 4, 52 teeth in the gear, 28 teeth in...
An external gear has a module of 4, 52 teeth in the gear, 28 teeth in the pinion, a pressure angle of 20°, pinion rotational speed of 1500 rpm, face width of 20 mm, and gear and pinion material having modulus of elasticity of 206 GPa and Poisson’s ratio of 0.3. The Hertzian contact pressure is 0.980 GPa. The lubricant used has an absolute viscosity of 0.3 Pa-s and pressure viscosity coefficient of 2.2 x 10-8 m2/N. The root-mean-square surface...
A 50-tooth spur gear is in mesh with a 27-tooth pinion. The gears have a diametral...
A 50-tooth spur gear is in mesh with a 27-tooth pinion. The gears have a diametral pitch of 5 teeth/in, and a pressure angle of φ = 25°. The gears transmit 80 HP at 4000 pinion rpm. Find the factors of safety against bending and surface failure. Assume that the teeth are full depth, Qv = 10, a through hardened to 360 HB steel gear, and a carburized and case hardened steel pinion. Assume a face width of 3.0 in,...
Sun Gear Planet Gear Ring Gear Quantity 1 3 1 Module 2 2 2 Teeth 22...
Sun Gear Planet Gear Ring Gear Quantity 1 3 1 Module 2 2 2 Teeth 22 Pressure Angle 20 degrees 20 degrees 20 degrees Pitch Diameter Complete the table above and show solution if possible Additional specifications: -Unit is in metric (mm) -the ring gear is stationary -the ratio is 10:1 (meaning the sun gear must complete 10 revolutions for each revolution of the output carrier)
A demonstration gyroscope wheel is constructed by removing the tire from a bicycle wheel 0.640 mm...
A demonstration gyroscope wheel is constructed by removing the tire from a bicycle wheel 0.640 mm in diameter, wrapping lead wire around the rim, and taping it in place. The shaft projects 0.210 mm at each side of the wheel, and a woman holds the ends of the shaft in her hands. The mass of the system is 9.50 kgkg ; its entire mass may be assumed to be located at its rim. The shaft is horizontal, and the wheel...
Two advantages for full mesh over shared medium Two disadvantages for full mesh over shared medium....
Two advantages for full mesh over shared medium Two disadvantages for full mesh over shared medium. Outline what a MAC protocol is and why it is used for shared medium case
a. Two concentric circles have radii of 6 mm and 12 mm. A segment tangent to...
a. Two concentric circles have radii of 6 mm and 12 mm. A segment tangent to the smaller circle is a chord of the larger circle. What is the length of the segment to the nearest tenth? b. A student inscribes an angle inside a semicircle to form a triangle. The measures of the angles that are not the vertex of the inscribed angle are x and 2x-9. Find the measures of all three angles of the triangle. Explain how...
A worm & worm wheel gear is connected to a motor running at 1000 rpm. Further...
A worm & worm wheel gear is connected to a motor running at 1000 rpm. Further 03 a gear train is formed using worm wheel having 100 teeth and module of 2mm as a driving gear. Gear “A” having 80 teeth is concentric with the worm wheel which in turn drives gear “B” in a ratio of 1:1. Gear “C” having 60 teeth and “B” are compound gears. Gear “C” is the driving gear for a simple gear train having...
Question 1 Part A Consider the market for fixies in Somerville. (A fixed-gear bicycle (or fixed-wheel...
Question 1 Part A Consider the market for fixies in Somerville. (A fixed-gear bicycle (or fixed-wheel bicycle) is a bicycle that has no freewheel, meaning it cannot coast, because the pedals are always moving when the bicycle is in motion. They are popular among hipsters in Cambridge.) The supply side of the market is perfectly competitive and is composed of fixie producers, who each have a long run cost curve C(q)=2q+5q^2. The demand side of the market comprises all the...
compute and print factorial if it is equal to 6, not equal to 6, and square...
compute and print factorial if it is equal to 6, not equal to 6, and square of the factorial, if the input is equal to 6 ..... C programming
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT