An open cylindrical PVC tube of length 0.95 m is inserted into a tall measuring cylinder...

An open cylindrical PVC tube of length 0.95 m is inserted into a tall measuring cylinder of length 0.90 m which is filled with water. The PVC tube is gradually lifted out of the water; at the same time a tuning fork is struck over the top of the PVC tube. (You have to Upload solution for this Question )

(*Ignore end correction)

When the top of the tube is 22.1 c m above the water level, the air column resonates with the tuning fork.

(a) What is the frequency of the tuning fork?

The PVC tube is lifted further out of the measuring cylinder until a second resonance occurs.

(b) Find the height above the water level at which this resonance occurs.

Expert Solution

If your any doubt remain uncleared, let me know in comments.

genius_generous answered 2 years ago

A cylindrical capacitor consists of a cylinder (of length L and radius a) with a total...

A cylindrical capacitor consists of a cylinder (of length L and radius a) with a total charge Q nested inside a thin conducting cylindrical shell (of length L and radius b) with total charge

A cylindrical tube that is 2.20 m long and has a radius of 150 mm is...

A cylindrical tube that is 2.20 m long and has a radius of 150 mm is filled with water. It is oriented with its long central axis vertical, and it is open to the air at the upper end. A hole 80.0 mm in radius is drilled in the bottom, and the water is allowed to drain out. When the water level is half the height of the tube, (a) what is the speed of the water exiting through the...

A cylindrical piece is shaped by a cold open die forging. The initial length is 70...

A cylindrical piece is shaped by a cold open die forging. The initial length is 70 mm, and the diameter is 50 mm. The piece length will be 40 mm at the end of the operation. Draw the part length-forging force graph by calculating the forging forces at the start time and at different length values of the part (h = 60 mm, 50. mm, 45 mm). K 345 MPa, n 0.17, p 0.1

A 1.5 kg solid cylinder (radius = 0.15 m , length = 0.60 m ) is...

A 1.5 kg solid cylinder (radius = 0.15 m , length = 0.60 m ) is released from rest at the top of a ramp and allowed to roll without slipping. The ramp is 0.80 m high and 5.0 m long. When the cylinder reaches the bottom of the ramp, what is its total kinetic energy? When the cylinder reaches the bottom of the ramp, what is its rotational kinetic energy? When the cylinder reaches the bottom of the ramp,...

The Elephant ear canal has a length of 17 cm, and is also an open-closed tube....

The Elephant ear canal has a length of 17 cm, and is also an open-closed tube. Assume the speed of sound is 343 m/s. a) Calculate the fundamental frequency of the Elephant's ear canal. b) Should sound with that frequency appear to be louder to the elephant, or quieter than half that frequency? Also, can the average human hear this sound? What range of frequencies can the average human hear? d) Draw a diagram of (i) the displacement of air...

A hollow tube of length L = 66.0 cm, open at both ends as shown above,...

A hollow tube of length L = 66.0 cm, open at both ends as shown above, is held in midair. A tuning fork with a frequency f = 256 Hz vibrates at one end of the tube and causes the air in the tube to vibrate at its fundamental frequency. Do not assume a value for the speed of sound in air. Give all of your answers to three significant digits. The same tube is submerged in a large, graduated...

reveals a longitudinal section of a circular tube with a length of l = 300 m....

reveals a longitudinal section of a circular tube with a length of l = 300 m. Additionally, the absolute roughness of the boundary, the diameter of the circular tube, the continuous loss over the whole length and the kinematic viscosity of the real fluid are given. Longitudinal section of a steel tube Given l = 300 m k = 1 mm d = 1.00 m hLoss, continuous = 0.50 m ν = 1.3 * 10-6 m2 /s For a similar...

A cylindrical aluminum pipe of length 1.42 m has an inner radius of 1.60 ×10-3 m...

A cylindrical aluminum pipe of length 1.42 m has an inner radius of 1.60 ×10-3 m and an outer radius of 3.39 ×10-3 m. The interior of the pipe is completely filled with copper. What is the resistance of this unit? (Hint: Imagine that the pipe is connected between the terminals of a battery and decide whether the aluminum and copper parts of the pipe are in series or in parallel.)

A thin-walled tube with a diameter of 6 mm and length of 20 m is used...

A thin-walled tube with a diameter of 6 mm and length of 20 m is used to carry exhaust gas from a smoke stack to the laboratory in a nearby building for analysis. The gas enters the tube at 200°C and with a mass flow rate of 0.001 kg/s. Autumn winds at a temperature of 15°C blow directly across the tube at a velocity of 7 m/s. Assume the thermophysical properties of the exhaust gas are those of air. (a)...

A sound wave is oscillating in the n=7 mode in a tube of length 3.25 m....

A sound wave is oscillating in the n=7 mode in a tube of length 3.25 m. What is the wavelength and frequency of the standing sound wave in the tube if the speed of sound is 340 m/s and: a) The tube is open at both ends. b) The tube is closed at both ends. c) One end of the tube is open and the other end is closed.

Question