Question

In: Physics

Explain why the induction cooker stays cold? And why save energy with an induction cooker?

Explain why the induction cooker stays cold? And why save energy with an induction cooker? What type of pots should you use, given the materials they are made of?

Solutions

Expert Solution

working pricipole of induction cooker is inside of induction cooker have a circuit and coil. circuit will convert 50Hz supply around 1000 HZ voltage .this high frequency current will passes through the coil it will produce high frequency changing flux just above the coil (above the cooker). when you place the ferro magnetic substances like steel plate the flux will collide with steel at very high speed so according to faradays law the current will induce on base of steel plate .this current also known as eddy current. this curret only circulate base of the plate so base will heated up due to this current by the joules law. so cooking stuff will heated up from the heat of the base of the plate but side area of steel will not produce any heat so there will cool

saving enrgy by limiting the wastage by only heating basement of the plate

all magnetically responsing (ferromagnetic )metals will suitable for pet

iron ,steel,cobalt ,nickel and their alloy


Related Solutions

Why do you save? Why do others save? How do we save? Discuss three reasons why...
Why do you save? Why do others save? How do we save? Discuss three reasons why you would save money.....and discuss three ways the government couldencourage people to save more money DO NOT POST YOUR COMMENT OR REPLIES AS ATTACHMENTS - THEY WILL NOT BE GRADED. THIS CONCLUDES ON SUNDAY BY 9 PM, NO GRACE PERIOD.  READ THE PROCEDURES ON DB'S FOR GUIDELINES AND TIME FRAMES FOR POSTING (SEE SYLLABUS) Your major commentary should be 250 words - a couple of...
Explain why it is better to use bolted connections on site and save welding for the...
Explain why it is better to use bolted connections on site and save welding for the factory. AND What two factors are critical in the design of bearing type bolted connections (i.e. what two things do engineers need to check in their calculations)?
Can or cannot alcohol save a life from cold condition (examples and evidences are needed)
Can or cannot alcohol save a life from cold condition (examples and evidences are needed)
1. May you expalin why induction motors are necessary and the difference if induction motors with...
1. May you expalin why induction motors are necessary and the difference if induction motors with the normal motors? 2. air circuit breakers how do they operate disadvantage and advantage 3. with a simple terminology may you explain cycloconverters? 4.expalin what is thyrestor, thermister? it can be to drive a pump or induction generator
Explain some insights of why there is a gap between prescribed energy savings of the Energy...
Explain some insights of why there is a gap between prescribed energy savings of the Energy star label (about 30 percent) and the estimated savings of the label found in the empirical models.
why do we use complete induction and why do we use structual induction? When should we...
why do we use complete induction and why do we use structual induction? When should we use complete or structual?
Explain the power balance in an induction motor.
Explain the power balance in an induction motor.
Can or cannot alcohol (ethanol) save life from the cold condition (the process of gluconeogenesis, hypoglycemia...
Can or cannot alcohol (ethanol) save life from the cold condition (the process of gluconeogenesis, hypoglycemia need to be talked, biochemisty related, need to have some chemical equations )
A patient complains of being low in energy and feeling cold much of the time. The...
A patient complains of being low in energy and feeling cold much of the time. The patient has also gained weight. Which one of the following is the most likely cause? A. acromegaly B. hypothyroidism C. Cushing’s Disease D. Diabetes mellitus E. hyperaldosteronism
4. Explain why the energy efficiency in the case of ideal quenching is lower than energy...
4. Explain why the energy efficiency in the case of ideal quenching is lower than energy efficiency in the regime of super-ideal quenching?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT