- A primary sedimentation basin for a municipal waste water treatment plant treats a flow of...

- A primary sedimentation basin for a municipal waste water treatment plant treats a flow of 3 MGD and removes 70 percent of the total suspended solids..The basin is 60ft in diameter with a depth of 15 ft. the TSS removed (kg)in the basin about ?

Expert Solution

This can be solved as follows.

Here concentration of total suspended solid is not given so either we assume any value or take an variable.

Calculation....

Ally Wells answered 1 hour ago

A wastewater treatment plant that treats wastewater to secondary treatment standards uses a primary sedimentation process...

A wastewater treatment plant that treats wastewater to secondary treatment standards uses a primary sedimentation process followed by an activated sludge process composed of aeration tanks and a secondary clarifiers. This problem focuses on the activated sludge process. The activated sludge process receives a flow of 15 million gallons per day (MGD). The primary sedimentation process effluent has a BOD5 concentration of 180 mgBOD5/L (this concentration is often referred as S). Before flowing into the activated sludge process, the primary...

Sedimentation basins are employed both in filter plants for drinking water treatment and in municipal wastewater...

Sedimentation basins are employed both in filter plants for drinking water treatment and in municipal wastewater treatment plants. Briefly explain what solids are removed in each of these sedimentation basins.

Q4. You are working in a waste water treatment plant, once your treatment plant receives sewage...

Q4. You are working in a waste water treatment plant, once your treatment plant receives sewage water with more colloidal or dissolved organic materials. As an Engineer what type of treatment will you prefer for this sewage water? Justify and explain the method selected by you.

what are the Mechanical treatment, biological treatment and Physico-chemical treatment for Municipal waste the Sultanate of...

what are the Mechanical treatment, biological treatment and Physico-chemical treatment for Municipal waste the Sultanate of Oman. and what are the economic, environmental and social impact of these treatments.

Waste water treatment is a crucial process to ensure that the waste water can be safely...

Waste water treatment is a crucial process to ensure that the waste water can be safely recycled back to the environment. However, there are certain challenges or issues related to this waste water treatment that can endanger the environment. In your opinion (supported by journal or academic references), what are those challenges and how can civil engineers prevent those happening>

A municipal water treatment plant is designed to produce 20 million gallons per day (MGD) of...

A municipal water treatment plant is designed to produce 20 million gallons per day (MGD) of potable water. The plant treats surface water using coagulation followed by sedimentation, filtration, and chlorination. Although the water is hard, it is not presently softened. The water is coagulated using a 30 mg/L dosage of alum (aluminum sulfate, Al2(SO4)3•14.3H2O, MW = 600). This chemical reacts in water to form Al(OH)3 as follows: Al2(SO4)3 + 6HCO3- → 2Al(OH)3(s) + 3SO4-2 + 6CO2 How many mg/L...

Suppose a municipality is proposing to upgrade its municipal water treatment plant to reduce pesticide contamination...

Suppose a municipality is proposing to upgrade its municipal water treatment plant to reduce pesticide contamination of its water supply to a level that does not adversely affect human health. The new plant would be constructed over the course of the initial year (year “0”) at a cost of $15 million. Once the plant begins operating in year “1”, estimated operating and maintenance costs of $3 million will be incurred per year for the life of the plant which is...

10. Suppose a municipality is proposing to upgrade its municipal water treatment plant to reduce pesticide...

10. Suppose a municipality is proposing to upgrade its municipal water treatment plant to reduce pesticide contamination of its water supply to a level that does not adversely affect human health. The new plant would be constructed over the course of the initial year (year “0”) at a cost of $15 million. Once the plant begins operating in year “1”, estimated operating and maintenance costs of $3 million will be incurred per year for the life of the plant which...

Environmental Engineering Water Treatment Wastewater Treatment Waste Water Treatment. A river is used as water resource...

Environmental Engineering Water Treatment Wastewater Treatment Waste Water Treatment. A river is used as water resource for a town. During monitoring, high level of NH3 is detected. A) What are the reasons for this pollution? B) Is it logical to continue feeding the water treatment system? C) Can NH3 be removed by regular units in a typical water treatment plant? In summary, how do you solve this problem, explain your reasons.

The Wilson Wastewater Treatment Plant currently provides primary treatment for a flow rate of 2500 m3/day....

The Wilson Wastewater Treatment Plant currently provides primary treatment for a flow rate of 2500 m3/day. The effluent from the primary tank has a soluble BOD5= 240 mg/L. You need to design an activated sludge treatment to update the plant. The secondary effluent standards to meet are 25.0 mg/L BOD5 total (suspended and soluble BOD) and 30 mg/L suspended solids. Use the following assumptions: Target soluble BOD5 in the effluent of the secondary treatment is 2.5 mg/L. Growth constants can...

Question