A box of 5.1kg is pushed with a force of 43N up a slanted ramp at...

A box of 5.1kg is pushed with a force of 43N up a slanted ramp at an angle of 32. If the coefficient of kinetic friction is 0.24, what is the boxes acceleration?

Expert Solution

genius_generous answered 2 years ago

A box is pushed across a rough horizontal floor by a force acting parallel to the...

A box is pushed across a rough horizontal floor by a force acting parallel to the floor in the direction of motion. A force doing negative on the box is------ gravity friction the applied force normal force of the floor upward on the body

-A box is pulled up a ramp by a cable at a constant speed There is...

-A box is pulled up a ramp by a cable at a constant speed There is a friction force between the ramp surface and the box. The work due to friction on the box is? zero, positive, increasing, negative, or decreasing? -Consider a pendulum. The magnitude of the masse's velocity is at maximum when? the mass is at it's lowest point, the mass is at it's highest point, at all points (constant speed), or the initial velocity? -Consider a rotating...

A box of mass ?=20.5 kg is pulled up a ramp that is inclined at an...

A box of mass ?=20.5 kg is pulled up a ramp that is inclined at an angle ?=19.0∘ angle with respect to the horizontal. The coefficient of kinetic friction between the box and the ramp is ?k=0.305 , and the rope pulling the box is parallel to the ramp. If the box accelerates up the ramp at a rate of ?=2.89 m/s2 , calculate the tension ?T in the rope. Use ?=9.81 m/s2 for the acceleration due to gravity.

A 5.35-kg box is pulled up a ramp that is inclined at an angle of 33.0°...

A 5.35-kg box is pulled up a ramp that is inclined at an angle of 33.0° with respect to the horizontal, as shown below. The coefficient of kinetic friction between the box and the ramp is 0.165, and the rope pulling the box is parallel to the ramp. If the box accelerates up the ramp at a rate of 2.09 m/s2, what must the tension FT in the rope be? Use g = 9.81 m/s2 for the acceleration due to...

A box of mass m=19.0 kg is pulled up a ramp that is inclined at an...

A box of mass m=19.0 kg is pulled up a ramp that is inclined at an angle θ=15.0∘ angle with respect to the horizontal. The coefficient of kinetic friction between the box and the ramp is μk=0.295 , and the rope pulling the box is parallel to the ramp. If the box accelerates up the ramp at a rate of a=3.09 m/s2, calculate the tension FT in the rope. Use g=9.81 m/s2 for the acceleration due to gravity.

You want to push a 9.5 kg box up a 3.6o ramp. The coefficient of kinetic...

You want to push a 9.5 kg box up a 3.6o ramp. The coefficient of kinetic friction between the ramp and the box is 0.5. With what magnitude force parallel to the ramp should you push on the box so that it moves up the ramp at a constant speed?

Question 1 A 242 g box slides up a 16.1° ramp at a speed of 4.05...

Question 1 A 242 g box slides up a 16.1° ramp at a speed of 4.05 m/s. Using conservation of energy and assuming the ramp is frictionless, how far along the ramp does the box slide before stopping? 0.745 m 3.02 m 29.6 m 0.871 m Question 2 A 10800 kg jet is preparing to land on a military aircraft carrier. In order to do so, the pilot manoeuvres the jet's tail to hook and snag a cable that is...

A 7.50-kg box slides up a 25.0o ramp with an initial speed of 7.50 m/s. The...

A 7.50-kg box slides up a 25.0o ramp with an initial speed of 7.50 m/s. The coefficient of kinetic friction between the box and ramp is 0.333. You wish to calculate the distance the box will move up the ramp before coming to a stop using mechanical-energy (NOT force-motion or the work-kinetic energy.) a. Write the correct equation for solving the problem, and then fully justify its use. (Start by identifying the objects in the system [only the required objects]...

A force of constant magnitude pushes a box up a vertical surface, as shown in the...

A force of constant magnitude pushes a box up a vertical surface, as shown in the figure. The box moves at a constant speed. If the mass of the box is 4.0 kg, and it is pushed 2.2 m vertically upward, the coefficient of friction is 0.35, and the angle θ is 37°. What is the work done by the force, F? Use g = 10 m/s2.

3. A block on an incline is pushed by a hand. The hand exerts a force...

3. A block on an incline is pushed by a hand. The hand exerts a force on the block parallel to the incline. State whether the specified quantities are positive, negative, or zero. Explain in each case. a. The block moves up the incline and speeds up.The work done by the hand on the block. The work done by the block on the hand. b. The block moves down the incline and speeds up (even though the hand is still...

Question