Question

In: Statistics and Probability

60 % of the chips used by a computer manufacturing company (CMC) are provided by supplier...

60 % of the chips used by a computer manufacturing company (CMC) are provided by supplier A and the rest by supplier B. The two suppliers have the following faulty chip rates: 0.3% for supplier A and 0.8% for supplier B. Consider a random batch of 20 chips (chips cannot be distinguished by supplier). a. Show that the expected number of faulty chips is 0.1. [15 marks] b. What is the probability of having two or more faulty chips? Justify your answer and the choice of the probability distribution. [15 marks] If the daily production of computer is 1000, and each computer has one chip: c. What is the probability that 8 or more computers do not pass the final quality check due to faulty chips? Justify your approach. [20 marks] The company, CMC, has to decide whether to implement a quality control screening of chips when delivered by the suppliers. In this case, only the chips that pass the screening will be used in the production process. Previous experience of quality control screenings reported that in 95% of the cases it was able to correctly identify faulty chips and in 3% of the cases was giving false negatives (meaning that even though the chip was working correctly the screening identified it as faulty). The screening process will be convenient only if the average number of daily faulty computers will be smaller than 3. d. Should the company implement the quality control screening? [20 marks]

Solutions

Expert Solution

(a) Let us first calcuate the probability of a faulty chip for CMC.

Suppose a random chip is selected, then it is either from supplier A or B accordingly, the probability of being faulty is different.

P[Chip is faulty] = P[Chip is from supplier A] * P[Chip is faulty] + P[Chip is from supplier B] *P[Chip is faulty]

P[Chip is faulty] = 0.6*0.3/100 + 0.4*.8/100 = 0.005

For a random sample of 20 chips, assuming the total population is sufficiently large, we can consider the distribution of number of faulty chips to be binomial with n = 20 and probability of success (being faulty) p = 0.005

Therefore, using the standard formula for mean of binomial , the expected number of faulty chips is given by

E[Chip is faulty] = n*p = 20 * 0.005 = 0.1

(b) What is the probability of having two or more faulty chips?

P[2 or more chips are faulty] from sample of 20 random chips. Again, For this we use the binomial distribution. The number of faulty chips is distributed as a binomial with probability p = 0.005 (as derived in (a) and n = 20.

Assumptions: This is due to assumption that the total population of chips is sufficiently large, and the chips from suppliers A and B are not distinguishable and randomly selected.  Therefore, even for sample of 20 without replacement, we can use the binomial distribution.

P[2 or more chips are faulty] = 1 - P[ less than 2 chips are faulty ] = 1 - { P[faulty chips = 0] + P[faulty chips = 1] }

we can evaluate the 2 probabilities using below formula

where X represents the random variable giving number of faulty chips.

n = 20

p = 0.005

We get P[X=0] = 0.90461

We get P[X=1] = 0.090916

P[2 or more chips are faulty] = 1 - 0.90461 - 0.090916 = 0.004474

(c) If the daily production of computer is 1000, and each computer has one chip: What is the probability that 8 or more computers do not pass the final quality check due to faulty chips?

use the same approach as a and b with same probability of faulty chip p = 0.005. But since each computer has one chip, the sample size n = 1000.

Using these p and n in above formula, we use Excel to evaluate the below

P[ 8 or more computers have faulty chips] = 1 - P[ 7 or less have faulty chips] =

1- {0.0067+0.0334+0.0839+0.1403+0.1757+0.1759+0.1466+0.1046}

which gives

P[ 8 or more computers have faulty chips] = 0.1329

(D) Should the company implement the quality control screening? [20 marks]

Screening process consists of two parts. Consider a randomly selected computer chip. Then probability of it being faulty as discussed above is p =0.005

(1) The chip is really faulty and the screen identifies chip as faulty (True Positive) = 0.005 * 0.95%

or (2) The chip is not faulty, but the screen identifies chip as faulty (False Negative) = (1-0.005)* 3%

Therefore

Prob{Screening identifies faulty] = 0.005*95% + (1-0.005)*3% = 0.0346

Therefore during quality control there is much greater chance of the screening identifying a chip as faulty that the true probability p.

Only the chips that pass the screening will be used in the production process. The screening process will be convenient only if the average number of daily faulty computers will be smaller than 3.

Daily production = 1000

Therefore expected number of daily faulty computers is given by expected value of binomial distribution with n = 1000

and probability of success = 0.0346

By standard formula still using binomial distribution , we get a average number of daily faulty computers = 0.0346*1000

Average = 34.6

Since this number is much larger than that desired by CMC, company should not implement the quality control screening.


Related Solutions

60 % of the chips used by a computer manufacturing company (CMC) are provided by supplier...
60 % of the chips used by a computer manufacturing company (CMC) are provided by supplier A and the rest by supplier B. The two suppliers have the following faulty chip rates: 0.3% for supplier A and 0.8% for supplier B. Consider a random batch of 20 chips (chips cannot be distinguished by supplier). a. Show that the expected number of faulty chips is 0.1. [15 marks] b. What is the probability of having two or more faulty chips? Justify...
Scenario 3 A company manufacturing computer chips finds that 8% of all chips manufactured are defective....
Scenario 3 A company manufacturing computer chips finds that 8% of all chips manufactured are defective. Management is concerned that employee inattention is partially responsible for the high defect rate. In an effort to decrease the percentage of defective chips, management decides to offer incentives to employees who have lower defect rates on their shifts. The incentive program is instituted for one month. If successful, the company will continue with the incentive program. Questions 11 to 16 pertain to Scenario...
3. The following information is provided by a dealer in computer chips. The dealer follows FIFO...
3. The following information is provided by a dealer in computer chips. The dealer follows FIFO method for valuing stock, calculate from the following figures – Date particulars April 1, 2019 Opening stock 750 chips @Rs1550 per chip Purchases April 10, 2019 1000 chips @Rs1750 per chip April 20, 2019 1650 chips @ Rs1875 per chip Sales April 15, 2019 900 chips @Rs3000 per chip April 16, 2019 1950 chips @ Rs 3250 per chip a) Cost of goods available...
Zeus Computer Chips, Inc., used to have major contracts to produce the Centrino-type chips. The market...
Zeus Computer Chips, Inc., used to have major contracts to produce the Centrino-type chips. The market has been declining during the past three years because of the dual-core chips, which it cannot produce, so Zeus has the unpleasant task of forecasting next year. The task is unpleasant because the firm has not been able to find replacement chips for its product lines. Here is demand over the past 12 quarters:     TWO YEARS AGO UNITS LAST YEAR UNITS THIS YEAR...
Zeus Computer Chips, Inc., used to have major contracts to produce the Centrino-type chips. The market...
Zeus Computer Chips, Inc., used to have major contracts to produce the Centrino-type chips. The market has been declining during the past three years because of the dual-core chips, which it cannot produce, so Zeus has the unpleasant task of forecasting next year. The task is unpleasant because the firm has not been able to find replacement chips for its product lines. Here is demand over the past 12 quarters:     TWO YEARS AGO UNITS LAST YEAR UNITS THIS YEAR...
Adam owns Chipcorp, a company that makes computer chips. It sold 700 chips to Widgetcorp and...
Adam owns Chipcorp, a company that makes computer chips. It sold 700 chips to Widgetcorp and exported 1,000 chips abroad. The price of a chip is $100. Chipcorp bought silicon wafers from abroad for its production process worth $70,000. Also Chipcorp employs an engineer, Becca, at a salary of $60,000. Clarice owns Widgetcorp, a company that makes widgets. Widgetcorp sold 650 widgets to domestic consumers and exported 50 widgets abroad. The price of a widget is $220. Widgetcor employs only...
4. A manufacturing plant produces memory chips to be used in cardiac pacemakers.The manufacturing process produces...
4. A manufacturing plant produces memory chips to be used in cardiac pacemakers.The manufacturing process produces a mix of “good” chips and “bad” chips. The lifetime of good chips follows an exponential law with a rate of failure ??, that is: P[chip still functioning after time ?] = ?−?t The lifetime of bad chips also follows an exponential law, but with a much faster failure rate of 500*?. a. Suppose the fraction of bad chips in a typical batch is?.What...
Stuart Manufacturing Company (CMC) was started when it acquired $90,000 by issuing common stock. During the...
Stuart Manufacturing Company (CMC) was started when it acquired $90,000 by issuing common stock. During the first year of operations, the company incurred specifically identifiable product costs (materials, labor, and overhead) amounting to $63,700. CMC also incurred $88,200 of engineering design and planning costs. There was a debate regarding how the design and planning costs should be classified. Advocates of Option 1 believe that the costs should be classified as general, selling, and administrative costs. Advocates of Option 2 believe...
Rooney Manufacturing Company (CMC) was started when it acquired $97,000 by issuing common stock. During the...
Rooney Manufacturing Company (CMC) was started when it acquired $97,000 by issuing common stock. During the first year of operations, the company incurred specifically identifiable product costs (materials, labor, and overhead) amounting to $58,500. CMC also incurred $67,500 of engineering design and planning costs. There was a debate regarding how the design and planning costs should be classified. Advocates of Option 1 believe that the costs should be classified as general, selling, and administrative costs. Advocates of Option 2 believe...
Benson Manufacturing Company (CMC) was started when it acquired $99,000 by issuing common stock. During the...
Benson Manufacturing Company (CMC) was started when it acquired $99,000 by issuing common stock. During the first year of operations, the company incurred specifically identifiable product costs (materials, labor, and overhead) amounting to $64,400. CMC also incurred $64,400 of engineering design and planning costs. There was a debate regarding how the design and planning costs should be classified. Advocates of Option 1 believe that the costs should be classified as general, selling, and administrative costs. Advocates of Option 2 believe...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT