How much work did the movers do to push a 47.0 kg crate 10.2 m across...

How much work did the movers do to push a 47.0 kg crate 10.2 m across a rough floor at a speed of 2.2 m/s with a horizontal pushing force of 58 N ?

Expert Solution

Work W = F.S , work done by all force = chang in its kinetic energy W = KE + (FS) W = 1/2 M V²+FS W = (1/2).47.(2.2)²+ 58.(10.2) = 705.34 J

genius_generous answered 2 months ago

Work on a sliding crate. A worker pushes a 47.0 Kg crate across a level horizontal...

Work on a sliding crate. A worker pushes a 47.0 Kg crate across a level horizontal floor by applying a constant force of exactly 150.0 N at an angle of 23.0 degrees below the horizontal. The crate begins at rest and ends 15.0m from where it started traveling at 2.6m/s A. What is the work done by the applied force as the crate moves across the floor? B What is the work done by the friction force as the crate...

Movers push an 80 kg trunk at 1.0 m/s when they encounter a 2.5 m long...

Movers push an 80 kg trunk at 1.0 m/s when they encounter a 2.5 m long stretch of floor where the coefficient of kinetic friction is 0.30. During this stretch of floor, the movers push the trunk with a steady force of 220 N. a. Determine the net force along the direction of motion b. Determine the net work done on the trunk c. Using the work-energy theorem, determine the speed of the trunk at the end of the 2.5...

A worker is trying to push a crate across the floor in the rightward direction with...

A worker is trying to push a crate across the floor in the rightward direction with a horizontal force of 15N. The crate does not move. The mass of the crate is 10kg. The coefficient of static friction is 0.25, and the coefficient of kinetic friction is 0.15. (1) what is the friction on the crate? Give both magnitude and direction of the friction. (2) He then pulls the right edge of the crate with a force of 50N at...

A 45.0-kg crate is dragged at constant velocity 8.20 m across a horizontal floor with a...

A 45.0-kg crate is dragged at constant velocity 8.20 m across a horizontal floor with a rope making a 30 degree angle above the horizontal. The coefficient of kinetic friction is 0.250. Find the work done by friction. Give your answer in Joules.

Elmer Fudd pulls a 65.0 kg wooden crate of mass m across the floor with a...

Elmer Fudd pulls a 65.0 kg wooden crate of mass m across the floor with a force F at an angle of 34.0°. The coefficient of friction between the surfaces is m = 0.235. If the crate moves at a constant speed, what is the magnitude of the applied force F?

To push a crate of mass 55 kg up a frictionless ramp with an angle of...

To push a crate of mass 55 kg up a frictionless ramp with an angle of 50 ° to the horizontal, a worker exerts a force of 1050 N parallel to the incline. The crate moves a distance of 5 m What work is done on the crate by the worker? J Tries 0/2 What work is done by the weight of the crate? J Tries 0/2 What work is done by the normal force exerted by the floor on...

A crate is given a push such that it has an initial speed of 5.2 m/s...

A crate is given a push such that it has an initial speed of 5.2 m/s headed up a 15 degree incline. If the crate travels 3.5m up the incline before reversing direction, what is the coefficient of kinetic friction between the crate and the incline?

A force of 250 and is used to keep up 65 kg crate sliding across the...

A force of 250 and is used to keep up 65 kg crate sliding across the warehouse floor what is the coefficient of sliding friction for the crate in the floor

A 45 kg wooden crate is being pushed across a wooden floor with a force of...

A 45 kg wooden crate is being pushed across a wooden floor with a force of 175 N. If, uk = 0.03. What is the acceleration of the crate?

A 107-kg crate is being pushed across a horizontal floor by a force P that makes...

A 107-kg crate is being pushed across a horizontal floor by a force P that makes an angle of 18.5 ° below the horizontal. The coefficient of kinetic friction is 0.246. What should be the magnitude of P, so that the net work done by it and the kinetic frictional force is zero?

Question