Q1) in footing answer all these parts for isolated square and rectangular footing: a) in which...

Q1) in footing answer all these parts for isolated square and rectangular footing:

a) in which part the crack will develop by the soil pressure in footing. where and why?

b) What the difference between one-way and two way shear in footing?

c) What is the depth of foundation and what is the depth of footing?

d) where will be the max moment?

e) what the difference between rectangular and square footing?

PLEASE ANSWER IN A CLEAR ANSWER AND SUMMARIZE WITH ONLY MAIN IDEA (CONCEPT)

Expert Solution

Please thumbs up ? for this answer , Thankyou dear, Have a awesome day.

Ally Wells answered 3 months ago

What will be the width (B in meter) of a square footing to support rectangular column...

What will be the width (B in meter) of a square footing to support rectangular column 40x40 cm and carries a dead load of 614 kN and live load of 477 kN. The net allowable bearing pressure is 180 kPa. The design should be according to (ACI) code with the following parameters: fc’ = 28 MPa, fy = 420 MPa.

Design an isolated rectangular footing to support an interior column 40 cm × 40 cm in...

Design an isolated rectangular footing to support an interior column 40 cm × 40 cm in cross section and carries a dead load of 800 kN and a live load of 600 kN. Use f́c= 21 MPa, fy= 420 MPa, q all (net) =200 kN / m2 , γsoil = 17 kN /m3 , and Df =1.25 m. Space limitations are such that one lateral dimension cannot exceed 2.5 m

Q1. Explain the process of strengthening two isolated footings to work as a combined footing and...

Q1. Explain the process of strengthening two isolated footings to work as a combined footing and draw schematics showing the steps involved Q2. What are the steps of repairing concrete columns by the method of column jacketing (Explain two methods). Draw schematics to support your answer Q3. What are the Mitigation and Remedial Measures against Plastic Shrinkage Cracking? Q4. What are the Causes of Concrete Structures Defects. Explain them

Design a rectangular footing for an 18-in square interior column with a dead load of 210...

Design a rectangular footing for an 18-in square interior column with a dead load of 210 k and a live load of 180 k. Make the length of the long side equal to twice the width of the short side, fy = 60,000 psi, fc' = 4000 psi, normal weight, and qallowable= 3650 psf. Assume the base of the footing is 5 ft 0 in below-grade , γ concrete = 150 pcf and γ soil = 100 pcf. Also, assume...

Rectangular Combined Footing design

What will be the length (L in meter) of a rectangular footing to support rectangular column...

What will be the length (L in meter) of a rectangular footing to support rectangular column 20x70 cm and carries a dead load of 625 kN and live load of 426 kN. The net allowable bearing pressure is 155 kPa. The design should be according to (ACI) code with the following parameters: fc’ = 28 MPa, fy = 420 MPa.

Please answer all parts in detail. Thank you. Q1. Betty bakes and sells bagels all year...

Please answer all parts in detail. Thank you. Q1. Betty bakes and sells bagels all year round. Betty plans and manages inventories of paper take-out bags with her logo printed on them. Daily demand for take-out bags is normally distributed with a mean of 90 bags and a standard deviation of 30 bags. Betty’s printer charges her $10 per order for print setup independent of order size. Bags are printed at 5 cents ($0.05) each bag. It takes 4 days...

Please answer all the parts of this question Please answer all the parts of this question...

Please answer all the parts of this question Please answer all the parts of this question Question: a) Where is the flow accelerating in the control volume? b) Will the pressure be greater or less than hydrostatic in a region of accelerating flow? c) Is the hydrostatic estimate of force on the gate; larger, smaller, or the same, as that obtained from the Momentum Equation? Explain. d) Where does the change in flow momentum go in this control volume? Explain.

. Design a square footing for a 16-in. square interior column with an ultimate dead load...

. Design a square footing for a 16-in. square interior column with an ultimate dead load = 300 (k) and an ultimate live load = 200 (k). Take fy=60,000 psi, fc=4000 psi, normal weight, and qa= 4500 psf. Assume the base of the footing is 4 (ft.) below grade. Draw the reinforcement detail also. Check for one way and two way shears with the support of diagram. With ACI code

1: A square footing is to be constructed as shown in the Figure at a founding...

1: A square footing is to be constructed as shown in the Figure at a founding depth of 2 m. Using the Terzaghi equation compute the ultimate surface capacity, [ (qult)Surf ], possible for the layered soil profile shown. Keeping in mind that Terzaghi’s semi-empirical bearing capacity equation can only be applied to a soil layer with a thickness greater than or equal to the applied stress contact-area-breadth (either virtual or real breadth). In such a case, second layer cannot...

Question