For a displacement addressing mode using the register R1, with
R1 = 196,803,43210, and the displacement...
For a displacement addressing mode using the register R1, with
R1 = 196,803,43210, and the displacement value is 12,39610, the
datum to be accessed is at the address?
Give six examples of memory addressing commands in Intel
assembly language two of each(register-memory, register offset with
an index, and perhaps one other) and explain what they are doing.
Why is there no Assembly command to move an item from one RAM
location to another directly?
Q2-B) Answer the followings:
I. Identify the addressing mode for Two of the following
instructions:
SBB AX,SI MOV [BX]+1234H,AL XCHG DL,[BP+20H]
II. True or False and why correct the false one:
1- A 20-bit address bus sports 20,000 memory addresses
2-A machine cycle refers to fetch an instruction
3-A memory with 256 addresses has 256 address lines
I want the answer in 45 minutes
What is the purpose of the status register in PIC
microcontroller architecture? Draw this register and define the
function of each of its bits.
Find C, Z, and DC flag bits for each of the following codes:
a)
MOVLW 9FH
ADDLW 61H
C = , Z = , DC =
b)
MOVLW 82H
ADDLW 22H
C = , Z = , DC =
c)
MOVLW 67H
ADDLW 99H
C = , Z = , DC =
(7494) Design and implementation of 4 bit shift register using
Behavioral style of modeling .... by VHDL .. the program should
based on the data sheet of 7494 and the truth table ... 13 input
and one output D.
let r1 and r2 be the relations represented as r1 (ABC)
and r2 (ADE) .Assume the corresponding domains of both the tables
are same.r1 has 2000 tuples and r2 has 4500 tuples
1.common tuples between r1 and r2 are 500, what would be the
resultant number of tuples for r1-r2, justify your answer
2.assuming 500 as the common tuples between r1 and r2,what is the
maximum number of tuples that results in ]] A( r1) U ]] A r2.
justify...