Calculate the gauge pressure (in Pa) inside a soap bubble 2.4 cm in radius using the...

Calculate the gauge pressure (in Pa) inside a soap bubble 2.4 cm in radius using the surface tension γ = 0.022 N/m for the solution. Enter a number with one digit behind the decimal point.

Solutions

Expert Solution

I hope you understood the problem and got your answers, If yes rate me!! or else comment for a better solutions

genius_generous answered 3 months ago

Next > < Previous

Related Solutions

The air inside an inflatable standup paddleboard is 68°F and a gauge measures the pressure of...

The air inside an inflatable standup paddleboard is 68°F and a gauge measures the pressure of this air to be 10 psi. If the volume of the air inside the board is reduced by 12% and the temperature increases to 102.2°F what is the final gauge pressure of this air in psi.?

A solid cylinder of radius r1 = 2.4 cm, length h1 = 5.9 cm, emissivity 0.72,...

A solid cylinder of radius r1 = 2.4 cm, length h1 = 5.9 cm, emissivity 0.72, and temperature 22°C is suspended in an environment of temperature 50°C. (a) What is the cylinder's net thermal radiation transfer rate P1? (b) If the cylinder is stretched until its radius is r2 = 0.55 cm, its net thermal radiation transfer rate becomes P2. What is the ratio P2/P1? (a) Number Enter your answer for part (a) in accordance to the question statement Units...

The temperature inside a pressure cooker is 117°C. Calculate the vapor pressure of water inside the...

The temperature inside a pressure cooker is 117°C. Calculate the vapor pressure of water inside the pressure cooker. The enthalpy of vaporization of water is 40.7 kJ/mol. What would be the temperature inside the pressure cooker if the vapor pressure of water was 2.50 atm? The enthalpy of vaporization of water is 40.7 kJ/mol.

A cubical box, 5 cm on each side, is immersed in a fluid. The gauge pressure...

A cubical box, 5 cm on each side, is immersed in a fluid. The gauge pressure at the top surface of the box is 594 Pa and the gauge pressure on the bottom surface is 1133 Pa. (Assume g = 10 m/s2 ) and 1 atm = 1.01 × 105 Pa. and 1 Pa = 1 N/m2 Define gauge pressure What is the relationship between the gauge pressure at top and bottom of the cubical box when it is immersed...

At one point in a pipeline the water's speed is 3.00 m/s and the gauge pressure is 5.00 × 104 Pa

At one point in a pipeline the water's speed is 3.00 m/s and the gauge pressure is 5.00 × 104 Pa. Find the gauge pressure at a second point in the line, 11.0 m lower than the first, if the pipe diameter at the second point is twice that at the first.

Using formulas, explain how and why the colours of a soap bubble floating in the air...

Using formulas, explain how and why the colours of a soap bubble floating in the air change continually? What thickness or soap film would ensure that all the transmitted light interferes constructively? Explain In radio wave production, the frequency of the wave is: a) equal to the oscillating frequency of the electron b) double the oscillating frequency of the electron c) half the oscillation frequency of the electron d)independent of the oscillation frequency of the electron.

A solid conducting sphere of radius 2.4 cm has a charge of 23 nC distributed uniformly...

A solid conducting sphere of radius 2.4 cm has a charge of 23 nC distributed uniformly over its surface. Let A be a point 1.8 cm from the center of the sphere, S be a point on the surface of the sphere, and B be a point 5.4 cm from the center of the sphere. What are the electric potential differences (a)VS – VB and (b)VA – VB?

A pressure difference of 24400 Pa is used to inject a sample onto a 58.4-cm-long capillary...

A pressure difference of 24400 Pa is used to inject a sample onto a 58.4-cm-long capillary that has a diameter of 60.0 μm. Assuming the viscosity of the sample is 0.00102 kg/(m·s), how much time is required to inject a sample that is 2.35% of the length of the capillary?

If a dynamic pressure of 250 Pa was measured in a water tunnel using a pitot...

If a dynamic pressure of 250 Pa was measured in a water tunnel using a pitot static tube and a mercury (denisty of 13650 kg.m ^ -3) manometer inckunded at 30 degrees, what is the velocity being measured in the water tunnel?

6 You make a solenoid with a radius of 5.0 cm radius using a copper wire...

6 You make a solenoid with a radius of 5.0 cm radius using a copper wire of the length of 200 m and diameter of 0.05 cm. what will be the magnitude of the magnetic field strength along the axis of it, if you run a current of 30.0 A through it? Now you hold a circular loop of a wire with the radius of 8 cm and a resistance of 2 ohm around this solenoid and want to induce...

Subjects