Question

In: Other

Material Balance, Water removal A 2000 kg batch of pharmaceutical-grade powder containing 7.5% by weight water...

Material Balance, Water removal
A 2000 kg batch of pharmaceutical-grade powder containing 7.5% by weight water is dried in a drier.
After drying, 95% of the water that enters with the wet powder will have been removed from the powder.
a. Draw a diagram of the process. Label ALL streams and indicate stream compositions. Use proper
notations and units.
b. State a basis.
c. Perform an overall material balance and a material balance for each species.
d. Calculate the final batch composition in wt.%
e. Calculate the final weight of the dried powder (lbm) and the weight of the water removed (lbm).

Show all work

Solutions

Expert Solution


Related Solutions

A tank contains 70 kg of salt and 2000 L of water. Water containing 0.4kg/L of...
A tank contains 70 kg of salt and 2000 L of water. Water containing 0.4kg/L of salt enters the tank at the rate 16L/min. The solution is mixed and drains from the tank at the rate 4L/min. A(t) is the amount of salt in the tank at time t measured in kilograms. (a) A(0) =  (kg) (b) A differential equation for the amount of salt in the tank is  =0=0. (Use t,A, A', A'', for your variables, not A(t), and move everything...
A pharmaceutical product is crystallized and washed with absolute ethanol. A 100 kg batch of product...
A pharmaceutical product is crystallized and washed with absolute ethanol. A 100 kg batch of product containing 10% ethanol by weight is to be dried to 0.1% ethanol by weight by passing 0.2 m3/min of 50�C nitrogen through the dryer. Estimate the rate (mol/min) that ethanol is removed from the crystals, assuming that ethanol exerts the same vapor pressure as if it were pure liquid. Based on this assumption, estimate the residence time for the crystals in the dryer. The...
A tank contains 90 kg of salt and 2000 L of water: Pure water enters a...
A tank contains 90 kg of salt and 2000 L of water: Pure water enters a tank at the rate 8 L/min. The solution is mixed and drains from the tank at the rate 4 L/min. What is the amount of salt in the tank initially? Find the amount f salt in the tank after 4.5 hours. Find the concentration of salt in the solution in the tank as the time approaches infinity. (Assume your tank is large enough to...
A 60 kg Drum of diameter 40 cm containing waste material of density 1100 kg/m^3 is...
A 60 kg Drum of diameter 40 cm containing waste material of density 1100 kg/m^3 is being lifted by a steel cable of diameter 30 mm. When the drum is hoisted 10m the natural frequency is measured to be 40 Hz. Determine the volume of the waste in the drum.
In a pharmaceutical application distilled water with a flow rate of 34560 kg/hr is to cool...
In a pharmaceutical application distilled water with a flow rate of 34560 kg/hr is to cool ethyl alcohol in a parallel flow heat exchanger. The alcohol flowing at 31320 kg/hr enters the exchanger at 75oC and is cooled to 45oC. Assuming that the water flows through the tubes and enters the exchanger at 15oC, determine, for an overall heat transfer coefficient of 0.5kW/m2K the dissipation rate, together with the required heat transfer area. The specific heat capacity of both the...
Plants and animals both have to deal with water balance and removal of toxins or solutes...
Plants and animals both have to deal with water balance and removal of toxins or solutes from their bodies. Explain how these materials are removed from the body in plants and animals and how water is conserved when necessary. Compare and contrast their processes.
Find the weight (in kg) of cement, water, flyash, fine and coarse aggregate to produce a...
Find the weight (in kg) of cement, water, flyash, fine and coarse aggregate to produce a cement/flyash mix for pumped concrete, using the British Method that has a characteristic 28-day compressive strength of 45 MPa. One hundred laboratory test results on the controlling mix show a standard deviation of 5.3 MPa (k=1.65). The exposure classification for durability purposes is A2 and the conditions require a fly ash/ high early strength cement blend (with a 40% proportion of fly ash). The...
Find the weight (in kg) of cement, water, flyash, fine and coarse aggregate to produce a...
Find the weight (in kg) of cement, water, flyash, fine and coarse aggregate to produce a cement/flyash mix for a column, using the British Method that has a characteristic 28-day compressive strength of 60 MPa. One hundred laboratory test results on the controlling mix show a standard deviation of 6.0 MPa (k=1.65). The exposure classification for durability purposes is A1 and the conditions require a fly ash/ high early strength cement blend (with a 40% proportion of fly ash). The...
Describe nitrogenous waste removal and salt and water balance (osmoregulation) of birds. Include in your answer:...
Describe nitrogenous waste removal and salt and water balance (osmoregulation) of birds. Include in your answer: a. a comparison of avian and mammalian kidneys with special reference to the structures and functions of nephrons b. the blood circulatory pattern of the avian kidney and the function of the renal portal valves c. the structure and function of salt glands and the advantage for birds of a non-pressure based compared to a pressure-based osmoregulatory mechanism
A solution of brine (water containing NaCl) contains 230 kg/m3 at 293 K.
A solution of brine (water containing NaCl) contains 230 kg/m3 at 293 K. The density of the brine at this temperature is 1.148 g/cm3 . Calculate the following, a. composition in mass fractions b. composition in mole fractions c. volume % of water. Assume the density of water at this temperature is 0.998 g/cm3
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT