A chimney with a design stack height of 200m is emitting SO2 at a rate of...

A chimney with a design stack height of 200m is emitting SO2 at a rate of 600g/s on a sunny day in summer, with moderate wind speed at the stack altitude. the volumetric flow rate is measured as 26m3/s, and the wind speed at a height of 10m above the ground is 5m/s. Calculate the grout level concentration of SO2 1km downward of the stack

Expert Solution

Amanda K answered 5 months ago

A snoke stack with an effective height of 45 m emits SO2 at a rate of...

A snoke stack with an effective height of 45 m emits SO2 at a rate of 8 kg hr -1. What is the contribution of this stack to ground-level SO2 concentrations at a school yard 950 m downwind, if wind speed is 1.5 m s-1 on a sunny winter day? Assuming unlimited mixing height, and the atmosphere stability is unstable?

Determine the chimney height required to preserve design flow in a natural recirculation boiling water reactor...

Determine the chimney height required to preserve design flow in a natural recirculation boiling water reactor channel with the following characteristics: System pressure: 7.136 MPa Reactor height 1.83 m Feedwater temperature 260 Celsius Combined pressure in losses in the channel, chimney, and downcomer: 1344.5 Pa Average channel density in the core: 642.9 kg / m^3 Two-phase friction losses in the chimney 137.9 Pa Friction losses in the downcomer: 68.9 Pa Friction drop in channel: 606.7 Pa Average exit void fraction:...

The rate of emission of SO2 from the stack of a power plant is 150 gm/sec....

The rate of emission of SO2 from the stack of a power plant is 150 gm/sec. The stack height is 50 m. Calculate the effective plume height on a sunny September day when the wind velocity is 5 m/sec. Use Class B stability. The effluents are being released at 10m/s and at a temperature of 310oK. The atmospheric temperature is 293oK. The stack diameter is 0.5 m

Using Gaussian dispersion equations, the stability class, and dispersion coefficient data for a source emitting SO2...

Using Gaussian dispersion equations, the stability class, and dispersion coefficient data for a source emitting SO2 at a rate of 50 g/sec on a very sunny summer day with a wind speed at anemometer height of 2.9 m/sec, and effective stack height of 30 m at temperature = 293K, determine the stability class and dispersion coefficients for receptor distances of 200, 500, 800 m and 1000 m. Calculate and draw the ground level concentrations in ppbv as a function of...

A car idling emits NOxat a rate of 2 g/sec. Assuming an effective “stack” (tailpipe) height...

A car idling emits NOxat a rate of 2 g/sec. Assuming an effective “stack” (tailpipe) height of 2 feet, Class C stability, and a wind speed at tailpipe height of 0.5 m/sec, estimate the ground-level concentration of NOx100 m directly downwind. Terrain is rural.

A factory contacted a Geotechnical consultant to design foundation of the tall chimney to take care...

A factory contacted a Geotechnical consultant to design foundation of the tall chimney to take care of flue gases formed during the tiles production. As per design of the Geotechnical Engineer, the chimney should have a square footing of 3.0 m side constructed at a depth of 2.50 m in the sub soil. It was found from the results of the laboratory test on the sample of sub-soil that the shear strength parameters in the form of angle of internal...

For exam review: Given a stack S1 with n numbers and an empty stack S2, design...

For exam review: Given a stack S1 with n numbers and an empty stack S2, design an algorithm (and write psudeocode for it) to sort all the numbers (from small on top to large on bottom) and store them in the originally empty stack S2, using only the stack ADT functions with the two given stacks, and a fixed number (independent of n) of int and char variables. What is the time complexity of your algorithm (related to n) in...

A facility emits 18 g SO2 /s at an effective height of 60m. On a cloudy...

A facility emits 18 g SO2 /s at an effective height of 60m. On a cloudy night, an anemometer at a height of 10 m above ground measures the wind-speed at 3.2 m/s. Predict the ground-level SO2 concentration 0.4 km directly downwind. (60 pts.) What does the plume look like? Sketch a plot. (20 pts.) What would the plume look like if there were an inversion layer at an elevation of 100 m? Sketch a plot. (20 pts.)

A sample of 10 employee’s height is taken to design the height of doorway. The measurements...

A sample of 10 employee’s height is taken to design the height of doorway. The measurements (in cm) are in the following table 167.87 153.24 150.39 173.38 177.91 155.88 171.06 155.57 171.43 178.62 What should be the height of the doorway if you want that just a 0.1% of the employees have troubles passing through it? You think that the initial 10-employee sample is too small and you want to ensure a confidence level of 97% with an error in...

Sulfur dioxide is emitted at a rate of 2 kg/s from the top of a chimney...

Sulfur dioxide is emitted at a rate of 2 kg/s from the top of a chimney that is 120m high. The plume initially rises vertically a further 10m above the chimney exit, before being convected horizontally by a wind speed of 15m/s under conditions of neutral stability. The daytime isolation is moderate. Calculate a) The concentration on the plume centre-line at a distance of 800m downwind of the chimney b) The ground level concentration at a distance of 800m downwind...

Question